NTE NTE572 Datasheet
General Purpose, Fast Recovery
Features:
D Fast Switching
D Low Leakage
D Low Forward Voltage Drop
D High Current Capability
D High Current Surge
D High Reliability
NTE572
Silicon Rectifier
Maximum Ratings and Electrical Characteristics:
(TA = +25°C unless otherwise specified. Single
phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.)
Maximum Recurrent Peak Reverse Voltage 1000V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum RMS Voltage 700V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum DC Blocking Voltage 1000V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Average Forward Rectified Current (.375” (9.5mm) lead length, TA = +55°C) 6A. . . . . . .
Peak Forward Surge Current (8.3ms single half sine–wave superimposed on rated load) 300A. . .
Maximum Instantaneous Forward Voltage (I
= 6A DC) 1.3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F
Maximum DC Reverse Current (At Rated DC Blocking Voltage, TA = +25°C) 10µA. . . . . . . . . . . . . .
Maximum Full Load Reverse Current
(Full Cycle Average .375” (9.5mm) lead length, T
= +55°C) 150µA. . . . . . . . . . . . . . . . . . . . .
L
Maximum Reverse Recovery Time (Note 1) 500ns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Junction Capacitance (Note 2) 100pF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Junction Temperature Range, T
Storage Temperature Range, T
stg
J
Note 1. Reverse Recovery Test Conditions: I
= 500mA, IR = 1A, IRR = 250mA.
F
–65° to +175°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–65° to +175°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note 2. Measured at 1MHz and applied reverse voltage of 4.0 volts.
1.000
(25.4)
Min
.360
(9.1)
Max
.052 (1.3) Dia Max
Color Band Denotes Cathode
.360 (9.1)
Dia Max
Loading...