NTE NTE2026 Datasheet
NTE2026
Integrated Circuit
Gas–Discharge Display Driver
Description:
The NTE2026 is a monolithic high–voltage bipolar integrated circuit which dramatically reduces the
number of discrete components required to link MOS, or other low–voltage circuitry, with the anodes
of gas–discharge display panels.
This device contains six drivers. Each driver has appropriate level shifting, signal amplification, output
off–state voltage bias, and 40mA output current sourcing for sequential addressing of display panel
anodes. The inputs include pull–down resistors for direct connection to open–drain PMOS logic.
The NTE2026 can be used in a wide variety of low– to high–voltage applications. High reliability , small
size, ease of installation, and low cost make this device an ideal choice for many applications.
Features:
D TTL/MOS Compatible Inputs
D High Output Breakdown Voltage
D High Output Current capability
D Low Power
D Reliable Monolithic Construction
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, V
Input Voltage, V
Output Current, I
Power Dissipation, P
BB
IN
OUT
D
Derate Above +25°C 16.7mW/°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Temperature Range, T
Storage Temperature Range, T
A
stg
Recommended Operating Conditions:
Parameter Symbol Min Typ Max Unit
Supply Voltage V
Input ON Voltage V
Output ON Current I
BB
IN
IN
+115V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+20V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–40mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–20° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–55° to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
– – 100 V
2.4 – 15 V
– – 25 mA
Electrical Characteristics: (TA = +25°C, VBB = 110V, unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
Output Leakage Current I
Output OFF Voltage V
Output Pull–Down Current I
Output ON Voltage V
Input ON Current I
OUT
OUT
OUT
OUT
IN
VIN = 0.4V, TA = +70°C – – 15 µA
VIN = 0.4V – – 1.0 V
Input Open, V
VIN = 2.4V, I
= V
OUT
= –25mA 107 108 – V
OUT
BB
600 900 1500 µA
VIN = 2.4V – 120 225 µA
VIN = 5.0V – 375 650
Supply Current I
BB
All Input Open – 10 100 µA
Two Inputs = 2.4V – 2.5 4.5 mA
Note 1. Positive (negative) current is defined as going into (coming out of) the specified device pin.
Pin Connection Diagram
Input 1
N.C12
Input 2
Input 3
Input 4
3
4
5
16
15
14
13
12
Output 1
N.C.
Output 2
Output 3
Output 4
Input 5
Input 6
GND
16 9
18
.870 (22.0) Max .260 (6.6)
6
7
8 9
11 Output 5
10 Output 6
.200 (5.08)
V
BB
Max
Max
.100 (2.54)
.700 (17.78)
.099 (2.5) Min
Loading...