Page 1
Page 2
General information needed to operate the device safely
.
Notic
e
A hazard that could result in light or moderate bodily injury or damage to the device if the safety
instructions are not followed.
^^S Caution
A hazard that could result in bodily injury or damage to the device if the safety instructions ar
e
not followed.
i
^Warnin
g
Existence of a hazard that could result in personal death or serious injury, if the serious safety
precautions are not followed
.
Dange
r
Degree of Danger or Damage and Seri
Classificatio
n
structions
,
T
OB EKOMEJI MIOHXEH XAY
C
| Cautions for handling and operation
nacmepmK C.
J
•Read these precautions carefully and use only as intended or instructed
.
•Safety instructions are intended to avoid potential hazards that could result in perso
n
are classified as follows in accordance with the seriousness of the risk
.
Cautions for handling and operation ••
••••
•
I.Component Names
2.PartNames
3.How to Connect Each Component
4.Check before treatmen
t
5.Operation
r
6.Option Set Up •••)
7.Fuse Replacement
•
• •
•
8.Cleaning /Sterilization (Micromotor only)
1
S. Error Codes
•
10.Troubleshooting ]•••
•••
•••
•
II.Specifications ••••'
12.Disposing Produc
t
•
13.Warrant
y
14.Symbols
—
15.EMC Informatio
n
•
•••
CONTENTS
This product is a surgical system used for bone removal, cutting, perforation and formation.
Prior to using this system, read the Operation Manual thoroughly in order to understand the instructions and directions for use, how to handl
e
the equipment and maintenance matters, so that you can use this system properly for many years to come. Keep this Operaticjn Manual within
easy reach.
Englis
h
Page 3
1
8
TOB EK0ME^^ MIOHXEH XAy
C
TIacmepnaK C.JI.
s shows that the Motor Handpiece is switched OFF by the ON/
OFF switching function operated from the Foot Control. Operatio
n
by the Foot Control is not available in this case. In order tp operate
it by the Foot Control, touch the Sub Panel <^J or turn the Foot
Control ON by the Foot Control Button.
3 TI AH 0
PMMHAJIOM
<Foot Control not connected>
The function setting done by each Button is displayed. For more information on these functions, refer to Step "6-4 Setting the Foot
Control".
J
<Blue) Foot Control Button (Green)
(Silver)
Foot Control Button
Foot Control Button
<Single Model
>
<Multiple Model
>
How to confirm the Sub Panel
CAUTION * ^ore us'n^ ^tie ^00^ ^on^ro' Button, be sure to confirm what function is assigned to that Button in the Sub Panel
.
? When Using the Foot Control
1)When depressing the Pedal of the Foot Control, the Motor Handpiece starts to operate.
When depressing the Pedal or releasing it, a short alarm sounds
.
2)In the Reverse Mode, the Bur starts rotating in reverse. During this reverse rotation, the
alarm continues to sound
.
3)Push the Foot Control Button (Multi Foot Control; blue, silver and green buttons; Single
Foot Control: silver button) to set the Control Unit to the pre-determined functio
n. Fo
r
any further information, refer to Step "6-4 Setting the Foot Control
"
Page 4
3
1
J Disposing Product
In order to avoid the health risks of operators handling the disposal of medical equipment, as well as the risks of environmental contamination
caused thereof, ask specialist firms who are licensed to dispose of specially controlled industrial wastes, to dispose the product for you
.
Classifications of equipmen
t
•Type of protection against electric shock:
-Class I equipmen
t
•Degree of protection against electric shock:
-Type BF applied part: S
I
•Method of sterilization or disinfection recommended by the manufacture
:
-See 8. Sterilizatio
n
•Degree of protection against ingress of water as detailed in the current edition of IEC 60529:
-Foot Control: IPX8 (Protected against immersion in water)
•Degree of safety of application in the presence of ^^flKiBB^fe anesthetic mixture with air or with
-FootControl: APEquipment©
T
OB EKOME,HMfOHXEHXA^C
o
•Mode of operation:
-Intermittent operation
t
lacmepHaK C.J1.
3 T!^H
0
O^riHAJIO
M
500-1,060hPa
700-1,060hPa
Atmospheric pressure
10-85% R
H
30-75% R
H
Humidit
y
-10-50C
0-40C (no condensation)
Temperature
Store and Transportation
Environment
Use Environment
3.5 m
2.0K
g
W220xD223xH175.5
FC-
74
1.4K
g
W153xD223xH175.
5
FC-73
Cord lengt
h
Weigh
t
Dimensions
Mode
l
<Foot Contro
b
3.5 m
1 min. ON/10 min. OFF
90g
7
W75.5xD28.0
xH141.3
DC 39.1V
1,200min-'
3-WPD
P20
1 min. ON/15 min. OFF
30
2g
359g
018xL1 00.4mm
02O.2xL1O1.8m
m
DC 21,8
V
48,000mm-'
P200-BMH
P200-BMH-H
S
3 min. ON/10 min. OF
F
3
05g
340
g
0i8xL99.7mm
019.3xL117.5m
m
DC 23.7
V
80,000min'
P200-SMH
P200-SMH-H
S
3min. ON/10 min. OFF
361 g
.
390g
'
023xL99mm
023xL99mm
DC 39.5
V
60,000min'
P200-HMH
P
200-HMH-H
S
Length of Handpiece Cor
d
Operation time
Weigh
t
I
Dimensions
Rated input
Rotational spee
d
Mode
l
<Micromotor
>
3.5 m
6.9Kg
W278xD250xH160m
m
75 ml/mi
n
65
VA
AC 120V 50/60 Hz
AC 230V 50/60 H
z
P200-CU-12
0
P200-CU-230
Length of Power Cor
d
Weigh
t
Dimension
s
Maximum feed rate of Irrigation Pump
Electricity consumptio
n
Power sourc
e
Model
<Control Unit>
Q] Specification
s
Page 5
Loading...