NSC LM3402HV, LM3402 Datasheet

June 2007

LM3402/LM3402HV

0.5A Constant Current Buck Regulator for Driving High
Power LEDs

LM3402/LM3402HV 0.5A Constant Current Buck Regulator for Driving High Power LEDs

General Description

The LM3402/02HV are monolithic switching regulators de­signed to deliver constant currents to high power LEDs. Ideal
for automotive, industrial, and general lighting applications,
they contain a high-side N-channel MOSFET switch with a
current limit of 735 mA (typical) for step-down (Buck) regula­tors. Hysteretic control with controlled on-time coupled with
an external resistor allow the converter output voltage to ad­just as needed to deliver a constant current to series and
series - parallel connected arrays of LEDs of varying number
and type, LED dimming by pulse width modulation (PWM),
broken/open LED protection, low-power shutdown and ther­mal shutdown complete the feature set.

Typical Application

Features

Integrated 0.5A N-channel MOSFET

■

VIN Range from 6V to 42V (LM3402)

■

VIN Range from 6V to 75V (LM3402HV)

■

500 mA Output Current Over Temperature

■

Cycle-by-Cycle Current Limit

■

No Control Loop Compensation Required

■

Separate PWM Dimming and Low Power Shutdown

■

Supports all-ceramic output capacitors and capacitor-less

■

outputs
Thermal shutdown protection

■

MSOP-8, PSOP-8 Packages

■

Applications

LED Driver

■

Constant Current Source

■

Automotive Lighting

■

General Illumination

■

Industrial Lighting

■

20192101

© 2007 National Semiconductor Corporation 201921 www.national.com

Connection Diagrams

LM3402/LM3402HV

20192145

8-Lead Plastic MSOP-8 Package

NS Package Number MUA08A

20192102

8-Lead Plastic PSOP-8 Package

NS Package Number MRA08B

Ordering Information

Order Number Package Type NSC Package Drawing Supplied As

LM3402MM

LM3402MMX 3500 units on tape and reel

LM3402HVMM 1000 units on tape and reel

LM3402HVMMX 3500 units on tape and reel

LM3402MR

LM3402MRX 2500 units on tape and reel

LM3402HVMR 95 units in anti-static rails

LM3402HVMRX 2500 units on tape and reel

MSOP-8 MUA08A

PSOP-8 MRA08B

1000 units on tape and reel

95 units in anti-static rails

Pin Descriptions

Pin(s) Name Description Application Information

1 SW Switch pin Connect this pin to the output inductor and Schottky diode.

2 BOOT MOSFET drive bootstrap pin Connect a 10 nF ceramic capacitor from this pin to SW.

3 DIM Input for PWM dimming Connect a logic-level PWM signal to this pin to enable/disable the

power FET and reduce the average light output of the LED array.

4 GND Ground pin Connect this pin to system ground.

5 CS Current sense feedback pin Set the current through the LED array by connecting a resistor from

this pin to ground.

6 RON On-time control pin A resistor connected from this pin to VIN sets the regulator controlled

on-time.

7 VCC Output of the internal 7V linear

regulator

8 VIN Input voltage pin Nominal operating input range is 6V to 42V (LM3402) or 6V to 75V

DAP GND Thermal Pad Connect to ground. Place 4 to 6 vias from DAP to bottom layer ground

Bypass this pin to ground with a minimum 0.1 µF ceramic capacitor
with X5R or X7R dielectric.

(LM3402HV).

plane.

www.national.com 2

Absolute Maximum Ratings (LM3402) (Note 1)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.

VIN to GND -0.3V to 45V
BOOT to GND -0.3V to 59V
SW to GND -1.5V
BOOT to VCC -0.3V to 45V
BOOT to SW -0.3V to 14V
VCC to GND -0.3V to 14V
DIM to GND -0.3V to 7V
CS to GND -0.3V to 7V
RON to GND -0.3V to 7V
Junction Temperature 150°C
Storage Temp. Range -65°C to 125°C
ESD Rating (Note 2) 2kV
Soldering Information
Lead Temperature (Soldering,

10sec) 260°C
Infrared/Convection Reflow (15sec) 235°C

Operating Ratings (LM3402) (Note 1)

V

IN

Junction Temperature Range −40°C to +125°C

Thermal Resistance θJA (MSOP-8 Package)
(Note 3) 200°C/W

Thermal Resistance θJA (PSOP-8 Package)
(Note 5) 50°C/W

6V to 42V

LM3402/LM3402HV

3 www.national.com

Absolute Maximum Ratings (LM3402HV) (Note 1)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.

VIN to GND

LM3402/LM3402HV

BOOT to GND -0.3V to 90V
SW to GND -1.5V
BOOT to VCC -0.3V to 76V
BOOT to SW -0.3V to 14V
VCC to GND -0.3V to 14V
DIM to GND -0.3V to 7V
CS to GND -0.3V to 7V
RON to GND -0.3V to 7V
Junction Temperature 150°C

-0.3V to 76V

Storage Temp. Range -65°C to 125°C
ESD Rating (Note 2) 2kV
Soldering Information
Lead Temperature (Soldering,

10sec) 260°C
Infrared/Convection Reflow (15sec) 235°C

Operating Ratings (LM3402HV) (Note 1)

V

IN

Junction Temperature Range −40°C to +125°C

Thermal Resistance θJA (MSOP-8 Package)
(Note 3) 200°C/W

Thermal Resistance θJA (PSOP-8 Package)
(Note 5) 50°C/W

6V to 75V

www.national.com 4

LM3402/LM3402HV

Electrical Characteristics V

= 24V unless otherwise indicated. Typicals and limits appearing in plain type apply

IN

for TA = TJ = +25°C. (Note 4) Limits appearing in boldface type apply over full Operating Temperature Range. Datasheet min/max
specification limits are guaranteed by design, test, or statistical analysis.

LM3402

Symbol Parameter Conditions Min Typ Max Units

SYSTEM PARAMETERS

t

ON-1

t

ON-2

On-time 1

On-time 2

VIN = 10V, RON = 200 kΩ

VIN = 40V, RON = 200 kΩ

2.1 2.75 3.4 µs

490 650 810 ns

LM3402HV

Symbol Parameter Conditions Min Typ Max Units

SYSTEM PARAMETERS

t

ON-1

t

ON-2

On-time 1

On-time 2

VIN = 10V, RON = 200 kΩ

VIN = 70V, RON = 200 kΩ

2.1 2.75 3.4 µs

290 380 470 ns

LM3402/LM3402HV

Symbol Parameter Conditions Min Typ Max Units

REGULATION AND OVER-VOLTAGE COMPARATORS

V

REF-REG

V

REF-0V

I

CS

SHUTDOWN

V

SD-TH

V

SD-HYS

OFF TIMER

t

OFF-MIN

INTERNAL REGULATOR

V

CC-REG

V

IN-DO

V

CC-BP-TH

V

CC-BP-HYS

V

CC-Z-6

V

CC-Z-8

V

CC-Z-24

V

CC-LIM

V

CC-UV-TH

V

CC-UV-HYS

V

CC-UV-DLY

I

IN-OP

I

IN-SD

CURRENT LIMIT

I

LIM

DIM COMPARATOR

V

IH

V

IL

CS Regulation Threshold CS Decreasing, SW turns on 194 200 206 mV

CS Over-voltage Threshold CS Increasing, SW turns off 300 mV

CS Bias Current CS = 0V 0.1 µA

Shutdown Threshold RON / SD Increasing 0.3 0.7 1.05 V

Shutdown Hysteresis RON / SD Decreasing 40 mV

Minimum Off-time CS = 0V 300 ns

VCC Regulated Output 6.6 7 7.4 V

VIN - VCC Dropout ICC = 5 mA, 6.0V < VIN < 8.0V 300 mV

VCC Bypass Threshold VIN Increasing 8.8 V

VCC Bypass Hysteresis VIN Decreasing 225 mV

VCC Output Impedance
(0 mA < ICC < 5 mA)

VIN = 6V 55

VIN = 8V 50

Ω

VIN = 24V 0.4

VCC Current Limit (Note 3) VIN = 24V, VCC = 0V 16 mA

VCC Under-voltage Lock-out

VCC Increasing 5.25 V

Threshold

VCC Under-voltage Lock-out

VCC Decreasing 150 mV

Hysteresis

VCC Under-voltage Lock-out

100 mV Overdrive 3 µs

Filter Delay

I

Operating Current Non-switching, CS = 0V 600 900 µA

IN

IIN Shutdown Current RON / SD = 0V 90 180 µA

Current Limit Threshold 530 735 940 mA

Logic High DIM Increasing 2.2 V

Logic Low DIM Decreasing 0.8 V

5 www.national.com

Symbol Parameter Conditions Min Typ Max Units

I

DIM-PU

DIM Pull-up Current DIM = 1.5V 75 µA

N-MOSFET AND DRIVER

R

DS-ON

V

DR-UVLO

Buck Switch On Resistance ISW = 200mA, BOOT-SW = 6.3V 0.7 1.5

BOOT Under-voltage Lock-out

BOOT–SW Increasing 1.7 3 4 V

Threshold

LM3402/LM3402HV

V

DR-HYS

BOOT Under-voltage Lock-out

BOOT–SW Decreasing 400 mV

Hysteresis

THERMAL SHUTDOWN

T

SD

T

SD-HYS

THERMAL RESISTANCE

θ

JA

Thermal Shutdown Threshold 165 °C

Thermal Shutdown Hysteresis 25 °C

Junction to Ambient MSOP-8 Package 200 °C/W

PSOP-8 Package 50

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see Electrical Characteristics.

Note 2: The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.

Note 3: VCC provides self bias for the internal gate drive and control circuits. Device thermal limitations limit external loading.

Note 4: Typical specifications represent the most likely parametric norm at 25°C operation.

Note 5: θJA of 50°C/W with DAP soldered to a minimum of 2 square inches of 1 oz. copper on the top or bottom PCB layer.

Ω

www.national.com 6

Typical Performance Characteristics

V

vs Temperature (VIN = 24V)

REF

V

vs VIN, LM3402 (TA = 25°C)

REF

LM3402/LM3402HV

20192129

V

vs VIN, LM3402HV (TA = 25°C)

REF

20192131

Current Limit vs VIN, LM3402 (TA = 25°C)

20192130

Current Limit vs Temperature (VIN = 24V)

20192132

Current Limit vs VIN, LM3402HV (TA = 25°C)

20192133

20192134

7 www.national.com

LM3402/LM3402HV

TON vs VIN,

RON = 100 kΩ (TA = 25°C)

TON vs VIN,

(TA = 25°C)

TON vs VIN,
(TA = 25°C)

TON vs RON, LM3402HV

(TA = 25°C)

20192135

20192137

TON vs RON, LM3402

(TA = 25°C)

VCC vs V

(TA = 25°C)

IN

20192136

20192144

20192138

www.national.com 8

20192139