MODEL:NF-8108
Your excellent helper in cable test!
INSTRUCTION MANUAL
Network Cable Tester
ORIGINAL
AUTHENTIC
Patented prod
Counterfeiting not
ucts, allow
ed
REV1.0
Please read and learn safety instructions before use or maintain the equipment
Please store the test in right place and operate in correct way in case of the sharp probe hurts sb .
Main testerr uses 6V DC for power supply;Receiver uses 9V battery for power supply .
Never put the equipment in the place with much dust, humidity and high temperature (over 40 .
Please use battery according to the specification; otherwise, it may result in damage to equipment.
Please never dismount the equipment arbitrarily. The maintenance and care shall be conducted by professional personnel.
The tester will shut off automatically if it does not work for 30 minutes in succession.
Please take out the battery in launcher and receiver if the equipment is not used for a long time so as to prevent that the battery liquid is leaked in future.
Never use the equipment to detect power cord with electricity (such as power supply circuit of 220V), other wise, it may result in damage to equipment and personal injury.
Never conduct related operation of communication line in thunderstorm weather so as to prevent lightning stroke and impact on personal safety.
Your excellent helper in cable test!
Contents
Overview.............................................................. |
01 |
Main Functions and features................................ |
02 |
Technical index .................................................... |
02 |
Product interface and keypad Introduction........... |
04 |
Product operation methods.................................. |
05 |
Diagram of series products................................ |
12 |
Your excellent helper in cable test!
Overview
NF-8108 network cable tester with new functions researched and developed by our company. The equipment is composed of tester (NF-8108) and remote identifiers..It is especially designed to check and test network cable. Such as open, short, reserve.
NF8108-M can also test cable length accurately. Thus, it becomes an avaiable tool in communiction field.
NF-8018
1.wiremap
2.pair&length
3.coax/tel
4.setup
PAIR&L
CALIBRATE
Cable Tester
NetWork
WIREMAP
Main tester(NF-8108) |
Remote identifier |
01 |
Your excellent helper in cable test! |
Main Functions and features
One person enough to complete cable continuity check.
Check wiring error in 5E, 6E, coaxial cable such as open, short, jumper wire, reverse connection .
Measure cable length and determine the distance of open and short circuit.
Simple and easy use. Big screen to display result . Portable unit with long battery life (wait-case 50 hours). Automatically time-delay shut off.
Self-checking and automatically compensate any change in battery capacity or ambient temperature.
Single board computer software watchdog design and reliable operation.
Technical indexes
(1). Overall dimension
Main tester: 180×80×40mm;
Remote identifier: 77×31×21mm.
(2). Power
Main testerr uses 6V DC for power supply;Receiver uses 9V battery .
(3). Display
Special 4 x 16 character big screen LCD lattice
(valid visual field 61.6 x 25.2 mm).
(4). Type of cable tested
STP/UTP twin twisted cable, coaxial cable.
Your excellent helper in cable test! |
02 |
Loading...