Novoferm Novo Speed Basic User Manual

www.novospeedsolutions.com
High Speed door Novo Speed Basic
Industrial interior door to 20 m2, wind resistant to 5 Beaufort
teel roller
s
electric drive
lateral guide with brush seals
PVC top hood(optional)
oor curtain of
d
.2 mm PVC
1
control box
coil cable for the self-testing bottom safety edge
safety photocell at 250 mm
aluminium reinforcing profile
hot dip galvanised steel
transparent vision section
(optional)
Properties
• max. surface area (WxH) = 20 m
• max. W x H = 4000 x 5000 mm
• wind resistant to 5 Beaufort
• opening speed approx. 1 m/s
• closing speed 0.75 m/s
• 1.2 mm thick door curtain in blue (standard), red, grey, orange, yellow, black or white, provided as standard with a vision section.
2
aluminium bottom beam with self-testing bottom safety edge
Guide details with break-away function (optional) and hood removable from the lateral guide
www.novospeedsolutions.com
High Speed door Novo Speed Basic
The Novo Speed Basic is a High Speed door with electric drive. Applications are in industry and public utilities. Functionality includes energy saving, draught exclusion and climate control.
Components and construction
The Novo Speed Basic is a door without balance springs, consisting of an electrically driven door curtain rolled up on a roller above the opening. The door curtain is made of horizontal sections of poly­ester-reinforced PVC. The sections are fitted with aluminium rein­forcement profiles. The door curtain has a transparent PVC vision section with height between approx. 1000 and 2000 mm. The bottom of the door curtain has an aluminium bottom beam with rubber sealing profile. A U-shaped profile with brush seals ensures the guidance of the door curtain. The lateral guides form one unit with the bearingplates for fitting the roller and drive.
Materials
The lateral guide is made of 2 hot dip galvanised steel profiles with brush seals removable for installation and maintenance. The hori­zontal roller is steel. The bottom beam is aluminium. The door cur­tain is 1.2 mm thick PVC with a polyester reinforcement inlay.
Colour
The door curtain is available in the colours blue, red, grey, orange, yellow, black or white and provided as standard with a vision sec­tion.
Dimensions
• max. width .........................................................................4000 mm
• max. height ........................................................................5000 mm
• max. wind force ...............................................................5 Beaufort
• lateral space not drive side (roller height).........................160 mm
• lateral space at the drive....................................................310 mm
• lateral space at the drive for fitting ...........................min. 550 mm
• lateral space at side guide profiles....................................110 mm
• space above ........................................................................575 mm.
Drive
The drive consists of an electric motor with reduction unit and built­in roll-off safety. The roller is directly driven.
Control and operation
• the door is supplied as standard with a control box with 3 but­tons (open-stop-close) and a CEE plug.
• the control system regulates a multitude of functions such as:
- adjustable open time or so-called ‘deadman operation’
- service and run mode
- LED indication for control of the various functions
- choice of permanently open or permanently shut.
Other forms of operation that can be connected to the standard control box are:
• operation by pull switch, key-operated switch, push-button, photocell, radar, induction loop detection or by radio control with transmitter and receiver. Other forms of operation on request.
Protection
• the door can be manually opened in the case of a power loss
• the bottom beam has a self-testing safety edge that stops the door and immediately opens it again if it comes into contact with an obstacle when closing; this protection is insensitive to humidity.
• on the lateral guide profiles a safety photocell and reflector are fitted as standard (250 mm from the floor). The door will not close if the beam is broken
• the drive has built-in roll-off safety.
Performance
The opening and closing speeds are approx. 1.0 m/s.
tructural provisions and connection
S
• in normal circumstances no special structural provisions are required for the assembly and fitting of a Speedroller
• for the electrical connection there must be a wall socket within 500 mm of where the control box will be positioned(CEE form 3~NPE/400V/50Hz/16A). As standard this is fitted at a height of approx. 1500 mm from the floor on the drive side.
• for a control box with frequency control there must be a wall socket within a radius of 500 mm of where the control box will be positioned (CEE form blue, 1 x 230V fused, slow operation 16 A and fitted with an circuit-breaker of at least 300 mA). As stan­dard this is fitted at a height of approx. 1500 mm from the floor on the drive side.
Technical details electric motor
mains voltage standard.....................................3N~400V/50Hz/16A
mains voltage with frequency control .......LNPE~230V/50Hz/16AT
degree of protection..................................................................IP54
consumed power ............................................................max. 2 kW.
Extras
Control and operation
• control by frequency control where:
max. opening speed .............................................................1.5 m/s
max. closing speed.............................................................0.75 m/s
• operation by push-buttons, pull switches, photocell, radar, induction loop or by radio control
• ‘half height’ setting (for personnel access)
• door interlock control in combination with another door
• other connection values than 3N~400V/50Hz/16A.
Protection
• connection of traffic lights (red/green or red and green).
• aluminium ‘Break Away’ end pieces in the bottom beam (crash resistant)
• electrical part in IP65.
Construction
• PVC hood over roller
• PVC hood over drive
• PVC hood over roller and drive
• lateral guide profiles and hood in customer-specified RAL colour.
technical alterations and printing errors reserved edition: January 2009
Loading...