Novex ND 6021 B, ND 6021 H, ND 6021 R, ND 6021 W, ND 6021 Z User Manual

BUILT-IN COOKTOP

Gas and electric cooktop

Газо-электрическая варочная панель

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

H10-20-260-100 Rev 004

USER MANUAL

Dear User,

Our objective is to make this product provide you with the best output which is manufactured in our modern facilities in a careful working environment, in compliance with total quality concept.

Therefore, we suggest you to read the user manual carefully before using the product and, keep it permanently at your disposal.

Note: This user manual is prepared for more than one model. Some of

the features specied in the Manual may not be available in your appliance.

All our appliances are only for domestic use, not for commercial use.

Products marked with (*) are optional.

“Conforms with the WEEE Regulations.”

Contens

Important warnings Electrical connection 13 Gas connection 14 Introduction of the appliance 17 Technical features 18 Installation of cooktop 20 Counter cutting sizes 23 Control panel 24 Usage of your cooktop 25 Maintenance and cleaning 28 Troubleshooting 29 Handling rules 30 Environmentally-friendly disposal 30 Package information 30

IMPORTANT WARNINGS

1. Installation and repair should always be performed

by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.

2. Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner.

3. The cooker should be used according to operating instructions.

4. Keep children below the age of 8 and pets away when operating.

5. WARNING: Fire hazard; do not store the materials on the cooking surface.

6. WARNING: The appliance and its accessible parts are hot during operation.

7. Setting conditions of this device are specied on

the label. (Or on the data plate)

8. The accessible parts may be hot when the grill is used. Small children should be kept away.

9. WARNING: This appliance is intended for cooking. It should not be used for other purposes like heating a room.

10. To clean the appliance, do not use steam cleaners.

11. NEVER try to put out the re with water. Only shut

down the device circuit and then cover the ame with a cover or a re blanket.

12. Children under 8 years of age should be kept away,

if they cannot be monitored continuously.

13. Touching the heating elements should be avoided.

14. CAUTION: Cooking process shall be supervised. Cooking process shall always be supervised.

15. The appliance is not suitable for use with an external

timer or a separate remote control system.

16. This device can be used by children over 8 years of age, people with physical, hearing or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.

17. This device has been designed for household use only.

18. Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.

19. Keep the appliance and its power cord away from children less than 8 years old.

20. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or

ammable materials on or in the appliance.

21. Keep the ventilation channels open.

22. Do not heat closed cans and glass jars. The pressure

may lead jars to explode.

23. Do not use the product in states like medicated

and/or under inuence of alcohol which may affect your

ability of judgement.

24. After each use, check if the unit is turned off.

25. Be careful when using alcohol in your foods. Alcohol

will evaporate at high temperatures and may catch re to cause a re if it comes in contact with hot surfaces.

26. If the appliance is faulty or has a visible damage, do not operate the appliance.

27. Do not put objects that children may reach on the appliance.

28. The packaging materials are dangerous for children. Keep packaging materials away from the reach of children.

29. Cooker supply can be disconnected during any construction work at home. After completing the work, re-connecting the cooker shall be done by authorized service.

30. Do not place metal utensils such as knife, fork, spoon on the surface of the appliance, since they will get hot.

31. To prevent overheating, the appliance should not be installed behind of a decorative cover.

32. Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to instructions.

33. Cable xing point shall be protected.

34. CAUTION: If the glass of the stove is broken, turn off any heating element immediately and disconnect the appliance from power source, do not touch the surface of the appliance and do not use the appliance.

35. User should not handle the cooker by himself.

36.Use shall be careful when cleaning gas burners. It

may cause personal injuries.

37. Since the hob is hot during cooking or right after cooking, scalding may occur due to extreme temperature

and steam.

38. When not turning of the cooker during cooking, user can touch hot surfaces causing burns.

39. If heavier loads are places on the cooker, these loads can trip over. It may cause personal injuries.

40. Allow disconnection of the appliance after installation,

by accessible plug or a switch in the xed wiring,

unless.

Electrical Safety

1. Plug the appliance in a grounded socket protected by

a fuse conforming to the values specied in the technical specications chart.

2. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.

3. WARNING: If the surface is cracked, turn off the appliance to avoid risk of electric shock.

4. Never wash the appliance by spraying or pouring

water on it. There is a risk of electrocution.

5. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.

6. Unplug the unit during installation, maintenance, cleaning and repair.

7. Make sure the plug is inserted rmly into wall socket

to avoid sparks.

8. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer

or its service agent or an equally qualied personnel to

prevent a hazardous situation.

9. Do not use cut or damaged cords or extension cords

other than the original cord.

10. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.

11. Make sure there is no liquid or humidity in the

outlet where the product plug is installed.

12. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an

integrated fuse installed on xed power supply according

to building code.

13. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.

14. Unplug the unit during installation, maintenance, cleaning and repair.

15. Appliance is equipped with a type ‘’Y’’ cord cable.

16. The circuit breaker switches of the cooker shall

be placed so that end user can reach them when the cooker is installed.

17. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III,

disconnection device shall be connected to xed power

supply according to wiring code.

18. Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It may cause an electric shock.

Gas Safety

1. This appliance is not connected to burning products

evacuation apparatus. This appliance must be connected and installed according to the installation regulations in force. Conditions regarding ventilation must be considered.

2. When a gas cooking appliance is used; humidity, heat and burning products are generated in the room. First of all, make sure the kitchen is well ventilated when operating the appliance and maintain natural ventilation openings or install a mechanical ventilation equipment.

3. After using the appliance heavily for en extended period of time, additional ventilation may be required. For example open a window or adjust a higher speed for mechanical ventilation, if any.

4. This appliance must be used only in well ventilated locations in accordance with the regulations in force. Please read the manual before installing or using this product.

5. Before positioning the appliance, make sure local network conditions (gas type and gas pressure) meets appliance requirements.

6. The mechanism cannot be run for longer than 15 seconds. If the burner is not on after 15 seconds, stop the mechanism and wait for at least one minute before trying to ignite the burner again.

7. All kinds of operations to be performed on gas

installation must be performed by authorized and competent people.

8. This appliance is adjusted for natural gas (NG). If you have to use your product with a different gas type, you have to apply to authorized service for the conversion.

9. For proper operation, hood, gas pipe and clamp should be replaced periodically accordint to manufacturer recommendations and when required.

10. Gas should burn well in gas products. Well

burning gas can be understood from blue ame and continuous burning. If gas does not burn sufciently,

carbon monoxide (CO) can be generated. Carbon monoxide is a colourless, odourless and very toxic gas; even small amounts have lethal effect.

11. Ask your local gas supplies about the phone numbers for emergencies related to gas and the measures to be taken upon gas odour is detected.

What To Do When Gas Odour Is Detected

1. Do not use naked ame, and do not smoke.

2. Do not operate any electrical switch.

(For example: lamp switch or doorbell)

3. Do not use telephone or mobile phone.

4. Open the doors and windows.

5. Close all valves on the appliances that utilize gas

and the gas counters.

6. Check all hoses and their connections against leaks. If you still smell gas, leave the house and warn your neighbours.

7. Call re brigade from a telephone outside the home.

8. Do not enter into the house until authorities clarify

it is safe.

Intended Use

1. This product is designed for home use. Commercial

use of the appliance is not permitted.

2. This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a room.

3. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.

4. Operational life of the product you have purchased is 10 years. This is the period for which the spare parts

required for the operation of this product as dened is

provided by the manufacturer.

Electrical Connection

1. Setting conditions of this appliance is indicated in tag or data plate.

2. Your appliance should be plugged in a fuse appropriate for electric

power. If necessary, it is recommended that installation is done by authorized service.

3. Your appliance is congured in accordance with electrical supply of

220-240V 50/60Hz.

4. If main electrical network is different from these values, contact with your authorized service.

5. Electrical connections of your appliance should only be made to the fuses having suitably wired grounding (grounded) system. If no convenient fuse is available in the place where your appliance is to be installed,

contact with authorized service immediately. Manufacturing rm is not responsible denitely for the damages that fuses whose grounding is not

made and connected to the appliance can cause.

6. Plug of the appliance should be close to be accessed easily to the fuse whose grounding is made without use of extension cord.

7. Do not allow contacting the power cable of your appliance with hot regions. Similarly, keep away it from sharp edges and corners.

8. If feeder cord is damaged, this cord should be replaced either by

manufacturer or its service agency or same degree qualied personnel in

order to hinder a dangerous situation.

9. Wrong electrical connection may give damage to the appliance.In this case, your appliance will remain out of guarantee scope. Electrical connection of your appliance should be done by authorized service.

Electrical connection scheme

Get electrical connection of your appliance done to authorized person in

line with the following scheme.

220-240 V ~ 50/60 Hz

H05 VV-F 3G 1.5 mm²

Neutral Neutre

Earth Terre Erdung

Gas Connection WARNING: Before starting any work related with gas installation, turn off

gas supply. Risk of explosion.

1. Connect your appliance to gas cock from the shortest way and in a manner to prevent any leakage. For safety, the hose used should be maximum 125 cm and minimum 40 cm.

2. While making gas leakage control; never use lighter, match, glowing

cigarette or similar inammable matter.

3. Apply soap bubble on connection point. If any leak/leakage exists, foaming will occur on soaped region.

4. If the cooktop is to be mounted on a cabinet or openable drawer, a heat protection panel having 15 mm minimum opening should be mounted under the cooktop.

For LPG connection;

For LPG (cylinder) connection, afx metal

clamp on the hose coming from LPG

Main gas pipe

cylinder. Afx an edge of the hose on hose

inlet connector behind the appliance by

Gasket

Hose inlet connector

Metal clamp

pushing to end through heating the hose in boiled water. Afterward, bring the clamp towards end section of the hose and tighten it with screwdriver. The gasket and hose inlet

Lpg connection hose

connector required for connection is as the picture shown below.

NOTE: The regulator to be afxed on LPG cylinder should have 300

mmSS feature.

WARNING: Gas hose and electric connection of the appliance should not

pass next to hot areas such as back of the appliance. Gas hose should be

connected by making wide angle turns against breaking possibility. Movement

of appliance whose gas connection is made may cause gas leakage.

Correct Incorrect Correct Correct

For natural gas connection;

WARNING: Natural gas connection should

Main gas pipe

be done by authorized service. For natural gas connection, place gasket

Gasket Nut

Natural gas Connection hose

in the nut at the edge of natural gas connection hose. To install the hose on main gas pipe, turn the nut. Complete the connection by making gas leakage control.

Transformation from natural gas to LPG and from LPG to natural gas

1. Turn off gas and electricity of the cooktop. If your cooktop is hot, wait

for cooling down.

2. For injector change, use a screwdriver whose edge is as the gure 1.

3. As seen in gure 2, demount burner lid and burner of the cooktop and

ensure visibility of injector.

4. Remove injector by turning as shown in gure 3 with screwdriver and

replace it with a new one.

Figure 1

Figure 2

Figure 3

5. After that, detach control switches of the cooktop. Make setting by

turning the screw in the middle of gas cocks with a small screwdriver in

the manner shown in the following picture. To adjust ow rate screw, use

a screwdriver having suitable dimension. For LPG, turn the screw clockwise. For natural gas, turn the screw one time counter clockwise. At low

position, length of normal ame should be 6-7 mm. For the last control, check out whether ame is open or closed.

Setting of your appliance may differ according to the type of gas cock used.

Figure 4 Figure 5

Ventilation Of Room

The air needed for burning is received from room air and the gases emitted are given directly in room. For safe operation of your product, good room ventilation is a precondition. If no window or room to be utilized for room ventilation is available, additional ventilation should be installed. However, room has a door opening outside, it is no needed to vent holes.

Room size Ventilating opening

Smaller than 5 m³ min. 100 cm²

Between 5 m³ - 10 m³ min. 50 cm²

Bigger than 10 m³ no need

In basement or cellar min. 65 cm²

INTRODUCTION OF THE APPLIANCE

4 5 6 7

1. Burner positions

2. Glass or metal surface

3. Control buttons

4. Small burner

5. Medium burner

6. Large burner

9 10

7. Wok burner *

8. Hotplate *

9. Coffee adaptor *

10. Wok burner adaptor *

11. Cast grill

12. Enamel grill

Technical Features

You can operate electric cooktops by turning the button on control panel you want to use to the level you desire. Cooktop powers as per levels are given in the following table.

Specications Level 1 Level 2 Level 3 Level 4 Level 5 Level 6

Ø80 mm hotplate 200 W 250 W 450 W --- --- ---

Ø145 mm hotplate 250 W 750 W 1000 W --- --- ---

Ø180 mm hotplate 500 W 750 W 1500 W --- --- ---

Ø145 mm rapid hotplate 500 W 1000 W 1500 W --- --- ---

Ø180 mm rapid hotplate 850 W 1150 W 2000 W --- --- ---

Ø145 mm hotplate 95 W 155 W 250 W 400 W 750 W 1000 W

Ø180 mm hotplate 115 W 175 W 250 W 600 W 850 W 1500 W

Ø145 mm rapid hotplate 135 W 165 W 250 W 500 W 750 W 1500 W

Ø180 mm rapid hotplate 175 W 220 W 300 W 850 W 1150 W 2000 W

Supply voltage 220-240 V 50/60 Hz.

Injector, gas ow and power table

Burner

Specications

Wok

burner (3,5)

Wok

burner (2,5)

Rapid

burner

Semi-Rapid

burner

Auxiliary

burner

G20,20 mbar G25,25 mbar

Gas natural Gas natural Gas natural

Injector 1,40 mm 1,28 mm 1,60 mm

Gas ow 0,333 m³/h 0,333 m³/h 0,333 m³/h

Power 3,50 kW 3,50 kW 3,50 kW

Injector 1,15 mm 1,06 mm 1,35 mm

Gas ow 0,243 m³/h 0,243 m³/h 0,243 m³/h

Power 2,50 kW 2,50 kW 2,50 kW

Injector 1,15 mm 1,10 mm 1,45 mm

Gas ow 0,276 m³/h 0,276 m³/h 0,276 m³/h

Power 2,90 kW 2,90 kW 2,90 kW

Injector 0,97 mm 0,92 mm 1,10 mm

Gas ow 0,162 m³/h 0,162 m³/h 0,162 m³/h

Power 1,70 kW 1,70 kW 1,70 kW

Injector 0,72 mm 0,70 mm 0,85 mm

Gas ow 0,96 m³/h 0,96 m³/h 0,96 m³/h

Power 0,95

kW 0,95 kW 0,95 kW

G20,25 mbar G20,13 mbar

Burner

Specications

Wok

burner (3,5)

Wok

burner (2,5)

Rapid

burner

Semi-Rapid

burner

Auxiliary

burner

G30,28-30 mbar

G31,37 mbar

LPG LPG LPG

Injector 0,96 mm 0,76 mm 0,96 mm

Gas ow 254 g/h 254 g/h 254 g/h

Power 3,50 kW 3,50 kW 3,50 kW

Injector 0,82 mm 0,73 mm 0,78 mm

Gas ow 182 g/h 182 g/h 182 g/h

Power 2,50 kW 2,50 kW 2,50 kW

Injector 0,85 mm 0,75 mm 0,85 mm

Gas ow 211 g/h 211 g/h 211 g/h

Power 2,90 kW 2,90 kW 2,90 kW

Injector 0,65 mm 0,60 mm 0,65 mm

Gas ow 124 g/h 124 g/h 124 g/h

Power 1,70 kW 1,70 kW 1,70 kW

Injector 0,50 mm 0,43 mm 0,50 mm

Gas ow 69 g/h 69 g/h 69 g/h

Power 0,95

kW 0,95 kW 0,95 kW

G30,50 mbar G30,37 mbar

WARNING: Diameter values written on the injector are specied without

a comma. For example; The diameter of 1,70 mm is specied as 170 on

the injector.

WARNING: For the modication to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modication.

WARNING: In order to increase the product quality, the technical

specications may be changed without prior notice.

WARNING: The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

INSTALLATION OF COOKTOP

Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an

electrician and plumber to arrange the utilities as necessary. Manufacturer

shall not be held responsible for damages caused by operations performed by unauthorized persons.

WARNING: It is customer’s responsibility to prepare the location the product shall be placed on and also to have the electrical installation prepared.

WARNING: The rules in local standards about electrical installations shall be followed during product installation.

WARNING: Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged. Damaged products cause a risk for your safety.

Correct Place For Installation

Product is designed in accordance with the kitchen counters supplied from market. A safe distance should be left between the product and kitchen walls and furniture. If hood/aspirator will be

650 mm min.

insta ll ed over your appliance, obey to the recommendation of hood / aspirator manufacturer for assembly height. (min. 65 cm) The gap that cooktop is to be placed on the counter should be cut in line with cooktop installation dimensions.

For installation of the product, the rules specied in local standards

related to electricity should be complied.

+ 45 hidden pages