Novell
ClientTM for Linux
1.1
December 23, 2005
www.novell.com
USER GUIDE
Legal Notices
Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and
specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.
Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time,
without obligation to notify any person or entity of such revisions or changes.
Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims
any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc.
reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to
notify any person or entity of such changes.
Any products or technical information provided under this Agreement may be subject to U.S. export controls and the
trade laws of other countries. You agree to comply with all export control regulations and to obtain any required
licenses or classification to export, re-export, or import deliverables. You agree not to export or re-export to entities
on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export
laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses.
Please refer to www.novell.com/info/exports/ for more information on exporting Novell software. Novell assumes no
responsibility for your failure to obtain any necessary export approvals.
Copyright © 2005 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied,
stored on a retrieval system, or transmitted without the express written consent of the publisher.
Novell, Inc. has intellectual property rights relating to technology embodied in the product that is described in this
document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S.
patents listed at http://www.novell.com/company/legal/patents/ and one or more additional patents or pending patent
applications in the U.S. and in other countries.
Novell, Inc.
404 Wyman Street, Suite 500
Waltham, MA 02451
U.S.A.
www.novell.com
Online Documentation: To access the online documentation for this and other Novell products, and to get
updates, see www.novell.com/documentation.
Novell Trademarks
eDirectory is a trademark of Novell, Inc.
NCP is a trademark of Novell, Inc.
NetWare is a registered trademark of Novell, Inc., in the United States and other countries.
Novell is a registered trademark of Novell, Inc., in the United States and other countries.
Novell Client is a trademark of Novell, Inc.
Third-Party Materials
All third-party trademarks are the property of their respective owners.
Contents
About This Guide 7
1 Using the Novell Client Tray Application 9
1.1 Starting and Stopping the Novell Client Tray Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.2 Logging In to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.2.1 Running Novell Login Scripts during Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.3 Logging Out of a Network Location (Server or Tree). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.4 Viewing Your Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.5 Changing Your Network Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.6 Mapping Network Directories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.7 Disconnecting a Mapped Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.8 Changing the Location of the Novell Client Tray Application . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.9 Configuring the Novell Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.10 Viewing Novell Client Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2 Using Novell Utilities 15
2.1 Assigning Rights to Volumes, Files, and Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2 Setting Inherited Rights and Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.3 Viewing Object Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.4 Salvaging Deleted Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.5 Purging Deleted Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.6 Sending Messages to Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.7 Sending Messages to the System Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
A Documentation Updates 23
A.1 December 23, 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
6 Novell Client 1.1 for Linux User Guide
About This Guide
This guide describes how to use the Novell® ClientTM for Linux features available in the Novell
Client tray application. This guide contains the following sections:
• Chapter 1, “Using the Novell Client Tray Application,” on page 9
• Chapter 2, “Using Novell Utilities,” on page 15
• Appendix A, “Documentation Updates,” on page 23
Audience
This guide is intended for users of the Novell Client for Linux.
Feedback
We want to hear your comments and suggestions about this manual and the other documentation
included with this product. Please use the User Comments feature at the bottom of each page of the
online documentation, or go to www.novell.com/documentation/feedback.html and enter your
comments there.
Documentation Updates
For the latest version of this documentation, see the Novell Client online documentation (http://
www.novell.com/documentation/linux_client/index.html).
Additional Documentation
For documentation on installing and administering Novell Client for Linux, see the Novell Client 1.1
for Linux Installation and Administration Guide.
For documentation on known issues, see the Novell Client for Linux Readme.
For documentation on login scripts, see the Novell Login Scripts Guide.
Documentation Conventions
In this documentation, a greater-than symbol (>) is used to separate actions within a step and items
within a cross-reference path.
®
A trademark symbol (
trademark.
, TM, etc.) denotes a Novell trademark. An asterisk (*) denotes a third-party
7
8 Novell Client 1.1 for Linux User Guide
1
Using the Novell Client Tray Application
The Novell® ClientTM for Linux workstation software extends the capabilities of Linux* desktops by
providing access to NetWare
the Client lets you enjoy the full range of Novell services such as authentication via Novell’s
eDirectory
The Client supports Novell’s traditional NCP
Novell Client for Linux 1.1 supports workstations running Novell Linux Desktop (NLD) 9 SP3.
For information on installing the Novell Client for Linux, see the Novell Client 1.1 for Linux
Installation and Administration Guide.
This section contains the following information:
• Section 1.1, “Starting and Stopping the Novell Client Tray Application,” on page 9
• Section 1.2, “Logging In to the Network,” on page 10
• Section 1.3, “Logging Out of a Network Location (Server or Tree),” on page 11
• Section 1.4, “Viewing Your Network Connections,” on page 11
• Section 1.5, “Changing Your Network Password,” on page 12
• Section 1.6, “Mapping Network Directories,” on page 12
• Section 1.7, “Disconnecting a Mapped Directory,” on page 13
• Section 1.8, “Changing the Location of the Novell Client Tray Application,” on page 13
TM
, network browsing and service resolution, and secure and reliable file system access.
®
and Open Enterprise Server (OES). When installed on workstations,
TM
protocol.
1
• Section 1.9, “Configuring the Novell Client,” on page 13
• Section 1.10, “Viewing Novell Client Version Information,” on page 14
1.1 Starting and Stopping the Novell Client Tray Application
You can use the Novell Client tray application to access many of the Novell Client for Linux
features. Simply click the red N icon ( ) located either in the tray or in the floating window. The
location of this icon is based on your workstation and your preferences, and it can be changed using
the Novell Client Options menu. See Section 1.8, “Changing the Location of the Novell Client Tray
Application,” on page 13 for more information.
Click to see the following menu:
Using the Novell Client Tray Application
9
Figure 1-1 The Novell Client Tray Application Menu
If you want to stop the Novell Client tray application from appearing on the tray, click > Quit.
To restart the Novell Client tray application (or if for some reason the red N icon ( ) does not
appear in your tray or float window), use one of the following methods:
•NLD GNOME: Click Programs > Accessories > Novell Tray.
• NLD KDE: Click the menu button > Applications > Novell Tray.
• Enter the following command in a terminal window:
/opt/novell/ncl/bin/ncl_tray
1.2 Logging In to the Network
When you log in to the network, you gain access to directories and files as well as other services
provided by network servers. Your network administrator should provide you with the required
information so that you can log in.
1 Use one of the following methods to open the Novell Login dialog box:
•Click > Novell Login.
•NLD GNOME: Click Programs > Accessories > Novell Login.
• NLD KDE: Click the menu button > Applications > Novell Login.
2 Enter your username and password, then click Advanced.
3 Specify the tree, context, and server information for the server you want to connect to.
You can type a DNS name or an IP address for the server. See your network administrator for
this information.
If your network has SLP set up, you can browse a list of available trees, contexts, and servers
by clicking their associated buttons.
4 (Optional) To clear any existing connections to servers before logging in, select Clear current
connections.
5 (Optional) To run login scripts during this login session, click the Script tab, then select the
options needed to run the login scripts.
For more information on login scripts, see Section 1.2.1, “Running Novell Login Scripts during
Login,” on page 11.
6 Click OK to log in to the server specified in Step 3.
10 Novell Client 1.1 for Linux User Guide
1.2.1 Running Novell Login Scripts during Login
When you successfully log in to the network, one or more login scripts are executed. Login scripts
can be used to automatically map drives and search drives to directories, display messages, set
environment variables, and execute programs or menus.
You can specify whether login scripts are run, whether the results are displayed, and whether the
login window is automatically closed during login. In addition, if the login script uses the %2, %3,
%4, or %5 variable, you can set these variables by clicking the Variables button.
Your network administrator should provide information on whether to use login scripts and, if so,
which login scripts to use.
For additional information on setting up login scripts, see the Novell Login Scripts Guide.
1.3 Logging Out of a Network Location (Server or Tree)
You can log out of a network location in either of the following ways:
• To log out of all existing connections, click > Novell Logout > Logout.
• If you are logged in to multiple trees and want to log out of a specific server or tree, click >
Novell Connections, select the tree or server that you want to log out of, then click Detach.
1.4 Viewing Your Network Connections
Novell Connections allows you to see what servers and trees you are logged in to. You can refresh
connections, set a specific tree as your primary connection, or log out of a tree or server.
1 Click > Novell Connections.
Using the Novell Client Tray Application 11
2 Do any of the following:
• To set a connection as the primary connection: Select the server you want to set as the
primary connection, then click Set As Primary.
• To refresh a connection: Select the connection that you want to refresh, then click
Refresh.
• To disconnect from a connection: Select the connection you want to detach from, then
click Detach.
3 Click Close.
1.5 Changing Your Network Password
To change your eDirectory password:
1 Click > Change Password.
2 Type your current password in the Old Password field.
3 Type your new password in the New Password field.
4 Retype the new password in the Confirm Password field.
5 Click OK.
1.6 Mapping Network Directories
When you map a directory, you create a symbolic link or shortcut to a path on the network and
assign it a name and location on your workstation. After the drive is mapped, you can use the
symbolic link to access the network resource, if you have sufficient rights on that resource. You can
map to a specific folder on the resource or to the root of the resource.
1 Click > Novell Map Directory.
2 Specify the path on the local file system where the symbolic link to the network resource is to
be created (using forward slashes).
For example: /home/bsmith
12 Novell Client 1.1 for Linux User Guide
You can also click the Browse button and select the location on the local file system where the
symbolic link is to be created.
If no location is specified, the symbolic link is created in the Map Link Default Location
configured in the System Settings or in your home directory.
3 Type the name of the symbolic link to be created, or select a letter from the drop-down list (if
you want to use a single letter as the name for the link).
4 In the Novell File System field, type the server name and the path to the directory you want to
map.
The path can be in any of the following forms:
•//server/volume/path
• server/volume:
• server/volume:/path
•.directory_object_name.fully_distiguished_eDirectory_path (such as a cluster volume, for
example: my_dir.usrs.accnt.mycompany)
You can also click the Browse button and locate the directory you want to map.
5 Click Map.
The mapped drive appears in your home directory (by default) or in the directory you specified in
Step 2.
1.7 Disconnecting a Mapped Directory
1 Click > Disconnect Novell Mapped Directory.
2 Select the mapped directory that you want to disconnect from, then click Disconnect.
1.8 Changing the Location of the Novell Client Tray Application
Use the User Preferences dialog box to change the location of the Novell Client tray application.
This is useful if your workstation has problems with tray icon support. If you are unable to see the
tray icon under the Windows Manager, you can select the Use Float Window option to create a
floating icon ( ) that can be used to access the Novell Client tray application features.
1 Click > User Preferences.
2 Select the location you want for the Novell Client tray application.
3 Click OK.
1.9 Configuring the Novell Client
To configure the Novell Client, run the Novell Client Configuration Wizard. It lets you configure
file browser, protocol, login, tray application, and OpenSLP settings.
1 Click > System Settings.
2 If you are not logged in as root, type the root password, then click OK.
3 Select the Client settings you want to configure, then click Start Wizard.
4 Follow the instructions in the left panel to configure the Novell Client settings.
Using the Novell Client Tray Application 13
5 When you are finished, click Finish.
6 (Conditional) If you made changes to the Protocol Settings page or the Service Location
Protocol (OpenSLP) Settings page, reboot the machine for those changes to take effect.
For more information, see “Using the Novell Client Configuration Wizard” in the Novell Client for
Linux Installation and Administration Guide.
1.10 Viewing Novell Client Version Information
To obtain version information for the Novell Client in the Novell Client tray application, click
About. This window also contains information on the specific packages loaded, including their
status, version, and release information.
You can also link to the Novell Client for Linux product page (http://www.novell.com/products/
clients/linux/overview.html) from the About dialog box.
1 Click > About.
2 Click the Packages tab to view information on the Novell Client for Linux packages loaded,
including status, version, and release information.
3 Click the Kernel tab to view information on the kernel and novfs.
4 Click OK.
14 Novell Client 1.1 for Linux User Guide
2
Using Novell Utilities
You can access various Novell® utilities by selecting the Novell Utilities option on the Novell
TM
Client
tray application menu. The options on the submenu let you do the following:
• Section 2.1, “Assigning Rights to Volumes, Files, and Directories,” on page 15
• Section 2.2, “Setting Inherited Rights and Filters,” on page 16
• Section 2.3, “Viewing Object Properties,” on page 18
• Section 2.4, “Salvaging Deleted Files,” on page 19
• Section 2.5, “Purging Deleted Files,” on page 20
• Section 2.6, “Sending Messages to Users,” on page 21
• Section 2.7, “Sending Messages to the System Console,” on page 22
2.1 Assigning Rights to Volumes, Files, and Directories
The Trustee Rights utility lets you display and give rights to volumes, files, and directories on a
Novell server. A trustee is an object (such as a User object, Group object, Organizational Role
objects, or container object) that has (or will have) rights to a volume, directory, or file. Trustee
assignments allow you to assign ownership, set permissions, and monitor user access. You must
have the Access Control (http://www.novell.com/documentation/nw65/nss_enu/data/
bri5796.html#bs3fjo7) right to change trustee assignments.
1 Click > Novell Utilities > Trustee Rights.
2
2 Select the folder or file you want to set trustee rights for, then click OK.
Using Novell Utilities
15
3 To add a trustee, select the object in the tree diagram, click Add, then set the rights for this user
by selecting the boxes under the letters on the right.
For each trustee in the list, there is a set of eight check boxes, one for each right that can be
assigned. If a check box is selected, the trustee has that right. To assign or unassign rights, use
the check boxes in the dialog box.
The following rights can be set for each trustee:
•Read: For a directory, grants the right to open files in the directory and read the contents
or run the programs. For a file, grants the right to open and read the file.
• Write: For a directory, grants the right to open and change the contents of files in the
directory. For a file, grants the right to open and write to the file.
•Erase: Grants the right to delete the directory or file.
• Create: For a directory, grants the right to create new files and directories in the directory.
For a file, grants the right to create a file and to salvage a file after it has been deleted.
•Modify: Grants the right to change the attributes or name of the directory or file, but does
not grant the right to change its contents (changing the contents requires the Write right).
•File Scan: Grants the right to view directory and file names in the file system structure,
including the directory structure from that file to the root directory.
• Access Control: Grants the right to add and remove trustees for directories and files and
modify their trustee assignments and Inherited Rights Filters.
• Supervisor: Grants all rights to the directory or file and any subordinate items. The
Supervisor right can’t be blocked by an Inherited Rights Filter. Users with this right can
grant or deny other users rights to the directory or file.
4 To remove a trustee, select one or more trustees in the Trustees list, then click Remove.
5 To view a list of rights and filters inherited by this volume, click Inherited Rights and Filters.
6 To apply the same trustee assignments to a group of selected files, click Combine Multiple
Trustees.
This check box is available only if you’re viewing the right for multiple files or directories. At
least one of the files or directories must have at least one trustee assignment. The trustees and
rights shown are the combined trustees and rights for all of the files. If you select Combine
Multiple Trustees, the trustee assignments that are chosen apply to all of the selected files after
you click OK or Apply.
For example, Kim is a trustee of file_a and file_b. Kim has Read, File Scan, and Access
Control rights for file_a and Read and File Scan rights for file_b. If you select file_a
and file_b and view their properties, Kim is shown as a trustee with Read, File Scan, and
Access Control rights.
If you select Combine Multiple Trustees and then click OK, Kim is given the Access Control
right for file_b. Therefore, Kim now has Read, File Scan, and Access Control rights for both
file_a and file_b.
7 Click Apply, then click OK when you are finished modifying trustee rights.
2.2 Setting Inherited Rights and Filters
The Inherited Rights and Filters utility lets you view and set information about trustees and rights.
Rights assignments on eDirectory
assignments on directories are inheritable. You can block such inheritance on individual subordinate
TM
containers can be inheritable or non-inheritable, but all rights
16 Novell Client 1.1 for Linux User Guide
items so that the rights aren’t effective on those items, no matter who the trustee is. One exception is
that the Supervisor right can’t be blocked.
1 Click > Novell Utilities > Inherited Rights and Filters.
2 Select the folder or file you want to view or set inherited rights and filters for, then click OK.
The main part of this dialog box is the list of trustees inherited from the selected item and its
parent folders.
3 To assign or unassign rights, use the check boxes to the right of a trustee.
For each trustee in the list, there is a set of eight check boxes, one for each right that can be
inherited. If a check box is selected, the trustee has that right.
The following rights can be set for each trustee:
•Read: For a directory, grants the right to open files in the directory and read the contents
or run the programs. For a file, grants the right to open and read the file.
• Write: For a directory, grants the right to open and change the contents of files in the
directory. For a file, grants the right to open and write to the file.
•Erase: Grants the right to delete the directory or file.
• Create: For a directory, grants the right to create new files and directories in the directory.
For a file, grants the right to create a file and to salvage a file after it has been deleted.
• Modify: Grants the right to change the attributes or name of the directory or file, but does
not grant the right to change its contents (changing the contents requires the Write right).
•File Scan: Grants the right to view directory and file names in the file system structure,
including the directory structure from that file to the root directory.
• Access Control: Grants the right to add and remove trustees for directories and files and
modify their trustee assignments and Inherited Rights Filters.
• Supervisor: Grants all rights to the directory or file and any subordinate items. The
Supervisor right can’t be blocked by an Inherited Rights Filter. Users with this right can
grant or deny other users rights to the directory or file.
4 To see a list of trustees for subfolders of the currently selected folder, click View Trustees
Below Directory.
Using Novell Utilities 17
A list of all the users and their rights to each subfolder appears. You can modify or remove
rights from this list.
5 To view a trustee’s current effective rights (taking into account the Inheritance filter), right-
click a trustee name, then click Current Effective Rights.
Users can receive rights in a number of ways, such as explicit trustee assignments, inheritance,
and security equivalence. Rights can also be limited by Inherited Rights Filters and changed or
revoked by lower trustee assignments. The net result of all these actions (the rights a user can
employ) are called effective rights.
6 To view a trustee’s properties (such as if they have the rights to modify inherited rights at this
level), right-click a trustee name, then click Properties.
7 Click Apply, then click OK when you are finished modifying inherited rights and filters.
2.3 Viewing Object Properties
The Object Properties utility lets you view the property pages (Folder Information and Novell
Rights) for a selected object. The property pages let you see information and statistics about that
object. If you have sufficient rights, you can set attributes for that object.
1 Click > Novell Utilities > Object Properties.
2 Select the object you want to see the properties for, then click OK.
3 On the Folder Information page, you can view the owner of the folder, the name spaces
enabled on the folder, the amount of disk space available to you, the date the folder was
created, updated, and archived, and any attributes set on the folder.
4 If you have rights to modify this object and need to make changes, select the properties you
want to changed.
5 To view the eDirectory rights associated with this object, click the Novell Rights tab.
18 Novell Client 1.1 for Linux User Guide
If you have Access Control rights and need to make changes to the Novell rights associated
with this object, see “Managing File Security” in the Novell Client 1.1 for Linux Installation
and Administration Guide for specific steps on setting Novell file rights.
If you do not have Access Control rights, your effective rights to the file appear in the Effective
Rights box. You cannot change these rights.
6 Click Apply, then click OK when you are finished viewing or modifying the object’s properties.
2.4 Salvaging Deleted Files
The Salvage utility lets you recover deleted files and directories from Novell file systems. Files that
have been purged cannot be recovered.
IMPORTANT: You cannot salvage files or directories from an OES for Linux Reiser volume.
1 Click > Novell Utilities > Salvage Deleted Files.
2 Select the folder where the files you want to recover are located, then click OK.
Using Novell Utilities 19
3 Select the files you want to recover.
To display files with 0 bytes, deselect Do Not Show 0 Size Files (selected by default). This
refreshes the display to show all deleted files, no matter the size.
4 Click Salvage File.
To salvage all deleted files in the folder, click Salvage All.
5 Click Close.
2.5 Purging Deleted Files
The Purge utility lets you purge deleted files and directories from Novell file systems. Deleted files
are purged from a volume when one of the following events occurs:
• The Purge Delay setting times out. Deleted files are purged automatically.
• The server starts purging files if a volume starts to fill up; the oldest files that have been deleted
are automatically purged.
• If you do not want a file to be restored after deletion, you can enable the Immediate Purge of
Deleted Files parameter. The file is deleted and purged immediately.
• You manually purge the deleted files.
WARNING: The Purge utility permanently removes deleted files from the selected directory.
Purged files cannot be recovered with the Salvage utility.
IMPORTANT: You cannot purge deleted files or directories from an OES for Linux Reiser
volume.
1 Click > Novell Utilities > Purge Deleted Files.
20 Novell Client 1.1 for Linux User Guide
2 Select the folder where the files you want to purge are located, then click OK.
3 Select the files you want to purge
To display files with 0 bytes, deselect Do Not Show 0 Size Files (selected by default). This
refreshes the display to show all deleted files, no matter the size.
4 Click Purge File.
To purge all deleted files in the folder, click Purge All. To purge subdirectories, click Purge
Subdirectories.
5 Click Close.
2.6 Sending Messages to Users
Use the Send Message to User utility to send a simple message to users on the network. You can
send the message to a single user or group or to multiple users or multiple groups of users. The
message appears on the receiver’s screen in a Message Popup dialog box. On your screen, the Send
Message Results dialog box shows the results. Only users who are logged in at the time you send the
message receive the message.
IMPORTANT: This feature is not fully functional. You can send messages from a Linux
workstation, but they can only be received by Windows* workstations.
1 Click > Novell Utilities > Send Message to User.
2 Select a server to see a list of users and groups on that server, then click Select.
Using Novell Utilities 21
3 Type the message you want to send in the Enter Message Text field.
4 Select the users or groups that you want to receive the message.
5 Click Send.
The Send Message Results dialog box shows which users or groups the message was sent to.
6 Click OK, then click Close.
2.7 Sending Messages to the System Console
Use the Send Message to System Console utility to send messages to a server system console.
IMPORTANT: This feature is not fully functional in this release.
1 Click > Novell Utilities > Send Message to System Console.
2 Select a server, then click Select.
3 Type the message you want to send in the Enter Message Text field.
4 Click Send, then click OK.
22 Novell Client 1.1 for Linux User Guide
A
Documentation Updates
A
This section contains information on documentation content changes made in this guide since the
initial release of the Novell
updates to the documentation.
The documentation was updated on the following dates:
• Section A.1, “December 23, 2005,” on page 23
®
ClientTM for Linux. The information will help you keep current on
A.1 December 23, 2005
• Page design reformatted to comply with revised Novell documentation standards.
Documentation Updates
23
24 Novell Client 1.1 for Linux User Guide
Loading...