Novatel Wireless CDP06PS User Manual

PocketSpider

®

CDPD MODEM

USER’S MANUAL

for

Windows CE 3.0

Nextcell, Inc.

661 E. 18th Street

Plano, TX 75074-5601

Document Number: CDP0601PB003 Revised: January 22, 2001

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell Inc.

© 2000 Nextcell, Inc.

CDPD0601PB003

i

CONTENTS

SECTION SUBJECT

1.0 INTRODUCTION

2.0 CDPD BASICS

2.1 Registering with a Carrier

2.1.1 Activating Your Service

2.1.2 Registration

2.1.3 CDPD Charges

3.0 INSTALLATION AND SETUP

3.1 Battery Operation

3.2 Compact Flash Memory Card Installation

3.3 Setup

4.0 MONITORING MODEM STATUS

4.1 LCD Display

4.1.1 Operational Status

4.1.2 Battery Low Indication

4.2 Handheld Device Screen

5.0 BATTERY AND CHARGER

5.1 Battery Installation and Removal

5.2 Initial Set up

5.3 Charger Operation

6.0 TECHNICAL SUPPORT
SAFETY AND REGULATORY INFORMATION
WARRANTY

APPENDICES

A REMOTE INSTALLATION PROCESS
B ABBREVIATIONS AND DEFINITIONS
C ADVANCED USER TOOLS

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.

CDPD0601PB003

1

PocketSpider

®

USER'S MANUAL

1.0 INTRODUCTION

Welcome to the world of wireless data. Your PocketSpider® is a compact, wireless data
modem that uses the Cellular Digital Packet Data (CDPD) wireless communication
system, allowing you to transfer data on the go (i.e., without wires). Wireless IP
(Internet Protocol) supports browser-based applications, giving you feature rich
capability with the Internet in your hand.

With this modem, you are taking advantage of the latest development in wireless data
technology. The PocketSpider Modem offers the convenience of wireless data, the
benefits of the CDPD network, ease of use, and minimal power consumption.

The PocketSpider is the first wireless IP (CDPD) modem designed exclusively for a
compact flash slot. With the power of wireless data and GPS, Nextcell is revolutionizing
the world of PocketPC®, Palm, and handheld PC devices.

This User’s Manual describes the use of the PocketSpider Modem with a Handheld PC
(H/PC) device. The PocketSpider is compatible with Windows CE version 3.0 (e.g.,
Pocket PC). Please read all instructions carefully before installing your PocketSpider
modem into your H/PC.

Your PocketSpider kit includes the following:

• PocketSpider

• Battery Pack (Li ion)

• Battery Charger

• Charger Base

• Wall transformer (AC adapter) for charger

• Compact Flash card with installation software

• User's Manual

2.0 CDPD BASICS

CDPD, short for Cellular Digital Packet Data, is also known as "Wireless IP." It is a data
transmission technology developed for use on cellular phone frequencies. CDPD uses
unused cellular channels (in the 800- to 900-MHz range) to transmit data in packets.
This technology offers data transfer rates of up to 19.2 Kbps, quicker call set up, and
better error correction than using modems on an analog cellular channel. CDPD is
based on TCP/IP, the same protocols that power the Internet.

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.

CDPD0601PB003

2

2.1 Registering With a Carrier

Just as you would do with a cell phone, you must first register for service with a local
CDPD carrier.

2.1.1 ACTIVATING YOUR SERVICE

The PocketSpider will work with any CDPD carrier. Decide which carrier offers the best
plan to meet your CDPD needs, then register with that carrier.

Typically, two service carriers will be available to a CDPD user. One will be known as
the A-side carrier and the other is known as the B-side carrier. You may register with
the A-side carrier, the B-side carrier, or both of the carriers.

2.1.2 REGISTRATION

When you register with a CDPD carrier, the carrier should give you the following
information:

• Internet Protocol (IP) address

• Carrier Side Identification (Either A or B)

• Service Provider Network Identifier (SPNI) Number

Be sure to record this information. This information may be needed in order to receive
customer service and/or technical support.

You will be assigned a specific Internet Protocol (IP) address to use with your modem.
Your carrier should also indicate whether they are the A-side carrier or the B-side
carrier, and provide you with their SPNI number

Your cellular carrier may also provide you with additional information that is needed for
use with your third-party protocol stack(s). Consult your protocol stack documentation
for information regarding stack configuration and use.

The cellular carrier has the responsibility to warn you of any changes the carrier may
make to its operations and/or procedures that would effect your usage of the service.
You will be advised of your right to issue a complaint to the FCC regarding these
changes.

2.1.3 CDPD CHARGES

For information about your CDPD charges, you will need to contact your CDPD carrier
service. Charges will vary according to the CDPD service provider you choose and the
plan you select. Most carriers will offer several CDPD plans that vary in rates and
structure. Your carrier should explain these items to you in detail when you consult them
about registration.

3.0 INSTALLATION AND SETUP

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.

CDPD0601PB003

3

The PocketSpider Modem is an easy-to-use product that requires very little set up. This
manual explains how to install and setup your PocketSpider Modem. The software
installation can be accomplished in two ways: (1) using a compact flash card, or (2)
input from a host computer to the handheld device. Use of a compact flash as
described below is the commonly used approach, and the alternative "remote"
installation approach is provided as Appendix A to this manual.

3.1 Battery Operation

The PocketSpider derives all its power from a self-contained battery pack, thereby
ensuring no adverse effects on battery life of the host H/PC device. Prior to using the
PocketSpider, charge the new battery for at least 2 hours. Details on the battery
charger and charging process are provided in Section 5 of this manual.

The Li ion (Lithium ion) battery is composed of Lithium, the lightest metal and the metal
that has the highest electrochemical potential. Because of its light-weight and high
energy density, Lithium-Ion batteries are ideal for portable devices. Lithium-Ion
batteries have no memory effect or poisonous metals, and they have long battery life.

Once charged, clip the battery into the back of the PocketSpider housing and you are
ready to go.

The PocketSpider should operate for several hours under normal transmit and receive
operating conditions, although sustained transmitting inherently reduces the time
between charge. In the event of a low battery, either remove and insert a second
charged battery, or remove the battery pack, recharge, and reinsert the pack into the
PocketSpider.

3.2 Compact Flash Memory Card Installation

1. Insert the setup memory card into Window CE device.

2. “Autorun” on the compact flash card should run automatically on your
Pocket PC device. The screen will ask if installation of the Nextcell Spider
Modem software is desired. Click “Yes” to continue.

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.

CDPD0601PB003

4

3. After installation is complete, click “ok” to close the install application and

reset the Pocket PC device.

4. After reset is complete, Setup is required before running PocketSpider

modem.

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.