OEM4-G2 / OEM4-G2L GPSCard™
QUICK START GUIDE
This guide provides the basic information you need to setup and begin
using your new OEM4-G2 or OEM4G2L GPSCard. For more detailed
information on the installation and
operation of your receiver, please
refer to the user manuals provided
on the accompanying CD. T o order a
printed copy of the manuals, free of charge, follow the instructions given on the enclosed User Manuals card.
BOX CONTENTS
In addition to this Quick Start Guide, the following is provided
with your GPSCard:
• 1 ESD wrist strap
• 1 CD containing:
• An installation program for NovAtel’s GPS PC
utilities, including GPSolution
• Product documentation, including user manuals
•The OEM4 Software Development Kit
• OEM4 Family Quick Reference Guide
• User Manuals card for requesting printed manuals
ADDITIONAL EQUIPMENT REQUIRED
The additional equipment listed below is needed for a basic
setup:
• A Windows-based PC with an RS-232 DB-9 port
• For an OEM4-G2, a power supply between 4.5 and 18
VDC capable of providing at least 2.7 W or, for an
OEM4-G2L, a 3.3 ± 0.15 VDC supply capable of at least
2.4 W
• An enclosure to protect against environmental conditions and RF interference
®
• A wiring harness to provide power to the receiver and
access to the data and strobe signals, with one or more
DB-9 connectors for serial communication with a PC or
other data communications equipment
• A null modem cable
• A quality GPS antenna, like the GPS-702 from NovAtel
• An antenna RF cable with a MMCX male connector at
the receiver end, such as NovAtel’s C0 16 RF cable combined with our GPS-C002 RF adapter cable
SETTING UP YOUR GPSCARD
Complete the steps below to connect and power your GPSCar d.
See Volume 1 of the OEM4 Family User Manual for more information on steps 1 through 3.
1. Install the GPSCard and the wiring harness in a secure
enclosure to reduce environmental expo sure and RF interference, making sure to protect against ESD.
If you do not take the necessary precautions against ESD,
including using the provided ESD wrist strap, you may damage the GPSCard.
2. Mount the GPS antenna on a secure, stable structure with
an unobstructed view of the sky.
3. Connect the GPS antenna to the GPSCard using the
antenna RF cable and the RF adapter cable.
4. Connect a serial port on the receiver to a serial port on the
PC using a null modem cable.
5. Connect the power supply to the GPSCard.
6. Plug in and/or turn on the power supply.
INSTALLING THE PC UTILITIES
Once the GPSCard is connected to the PC, antenna, and power
supply, install NovAtel’s GPS PC utilities
1. Start up the PC.
.
2. Insert the accompanying CD in the CD-ROM drive of the
computer.
3. Select Install the OEM4 GPS PC Utilities from the window
that is automatically displayed. If the window does not automatically open when the CD is inserted, select Run from the
Start menu and select the Browse button to locate Setup.exe
on the CD drive.
4. Install the PC utilities by advancing through the steps provided in the NovAtel GPS PC Utilities setup utility.
ESTABLISHING COMMUNICATION WITH THE
RECEIVER
To open a serial port to communicate with the receiver, complete
the following.
1. Launch GPSolution from the Start menu folder specified during the installation process. The default location is Start |
Programs | OEM4 PC Software.
2. Open the Device menu and select Open....
3. Select the New... button in the Open dialog box.
4. Enter a name for the new device configuration in the Name
field of the New Config dialog box.
5. Select the Settings button.
6. Select the PC serial port the GPSCard is connected to from
the PC Port drop-down list.
7. Select 57600 from the Baud Rate list.
8. Uncheck the Use hardware handshaking checkbox.
9. Select OK to save the settings.
10. Select the OK button to close the New Config dialog box and
create the new device configuration.
11. Select the new configuration from the Available device con-
figs list in the Open dialog box.
12. Select the Open button to open communications with the
GPSCard.
USING GPSOLUTION
GPSolution provides access to key information about your
receiver and its position. The information is displayed in windows
accessed from the View menu. Fo r ex am p l e, selec t Position
Window from the View menu to display the position of the
receiver. To show details of the GPS and geostationary (SBAS)
satellites being tracked, select Tracking Status Window from the
menu. For more information on using GPSolution, select
Contents from GPSolution’s Help menu.
ENTERING COMMANDS
The GPSCard uses a comprehensive command interface.
Commands can be sent to the receiver using the Console
window in GPSolution, which is opened from the View menu.
Commands are entered in the text box at the bottom of the
window.
The following information is important when entering co mmands:
• Commands can be entered in three formats: ASCII,
Abbreviated ASCII, and Binary. Abbreviated ASCII is the
best format to use when you wish to work with the
receiver directly.
• Press the Enter key to send the command string to the
receiver.
• The commands are not case sensitive.
The OEM4 Family Quick Reference Guide provided with the
receiver lists all the available commands and the parameters
they use for the Abbreviated ASCII format.
LOGGING DATA
An extensive collection of logs has been created to capture the
data your GPSCard receives and processe s. These logs can be
directed to any of the GPSCard’s serial ports and can be automatically generated when new or changed data becomes available or at regular intervals. The available logs are listed in the
OEM4 Family Quick Reference Guide.
Logs can be generated in one of three formats: ASCII, Abbrevi-
ated ASCII, or Binary. Refer to Volume 2 of the OEM4 Family
User Manual for information on the LOG command, specifying
the output format, and the detailed contents of each log.
If you prefer, GPSolution provides a graphical interface for
configuring data logging. Select Logging Control Window from
the View menu. In the Logging Control window, you can select
which logs to capture and choose which ports to send the data
to. In addition, you can specify a file in which to save the data.
DETERMINING WHEN THE POSITION IS VALID
When the receiver has a valid position, the POSITION VALID, or
PV, signal will go high. In addition, the Solution Status field in
GPSolution’s Position window will show Computed.
ENABLING SBAS POSITIONING
Certain models of the OEM4-G2 and OEM4-G2L GPSCards are
capable of SBAS positioning. This positioning mode is enabled
using the SBASCONTROL command. At the time of publication,
the WAAS (North America) and EGNOS (Europe) systems are in
test mode. As a result, the following commands are typically
used to enable WAAS and EGNOS modes, respectively:
SBASCONTROL ENABLE WAAS 0 ZEROTOTWO
QUESTIONS OR COMMENTS
If you have any questions or comments regarding your
GPSCard, please contact NovAtel Customer Service
using one of the methods provided below.
Email:support@novatel.ca
Web:www.novatel.com
Phone: 1-800-NOVATEL (U.S. & Canada)
403-295-4900 (International)
Fax: 403-295-4901
To log data, use the LOG command. For example, to log the
pseudorange position to COM 2 every 30 seconds, enter the
following:
LOG COM2 PSRPOS ONTIME 30
SBASCONTROL ENABLE EGNOS 120 IGNOREZERO
Once enabled, the Position Type field shown in GPSolution’s
Position window should change from Single to WAAS.
© Copyright 2002, 2003 NovAtel Inc. All rights reserved.
Printed in Canada on recycled paper.
Unpublished rights reserved under international copyright laws. Recyclable.
GM-14915047 Rev 3 July 31, 2003