Nova-Tech WD-00653-23 User Manual

P.O. Box 5136
Vernon Hills IL 60061, USA
Phone: [phone] Fax: [phone] E-mail: [e-mail]

Oakton 00606-10, 00653-15, 00653-16,
00653-18, 00653-20, 00653-23, 00653-27,
00653-47, 00653-50, 00653-89, 35653-09,
35653-10, 35653-11, 35653-12, 35653-13,

35653-15

Conductivity Standard

Material Safety Data Sheet

I. PRODUCT AND COMPANY IDENTIFICATION:

CATALOG NUMBERS: 00606-10, 00653-15, 00653-16, 00653-18, 00653-20,
00653-23, 00653-27, 00653-47, 00653-50, 00653-89,
35653-09, 35653-10, 35653-11, 35653-12, 35653-13,
35653-15

PRODUCT NAME: Conductivity Standard
PRODUCT USE: Standard
NFPA RATINGS: HEALTH: 0 FLAMMABILITY: 0 REACTIVITY: 0
MANUFACTURER’S NAME: Thermo Fisher Scientific, Inc
ADDRESS: 166 Cummings Center, Beverly MA 01915, USA
PHONE NUMBER FOR INFORMATION: 978-232-6000
CHEMTREC® 24 hr Emergency: US 800-424-9300; International 703-527-3887

II. COMPOSITION/INFORMATION ON INGREDIENTS

% LD50 mg/kg
COMPONENT Potassium Chloride (KCl)

CAS NO. 7447-40-7 < 1 2,600 (ORL-RAT)
COMPONENT Deionized Water (H2O)

CAS NO. 7732-18-5 > 99 190,000 (IPR-MUS)

III. HAZARDS IDENTIFICATION

Low hazard for normal use.
TARGET ORGANS: Eyes, skin.
ACUTE TOXICITY: May cause irritation to eyes and skin.
CHRONIC TOXICITY: No information found.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: M ay cause stinging or irritation
in an open cut.

IV. FIRST AID MEASURES

EYE AND SKIN CONTACT: Wash off with large amounts of water.
INGESTION: Drink large amounts of water. Consult physician.
INHALATION: Not hazardous.

V. FIRE FIGHTING MEASURES

FLASH POINT: NA AUTOIGNITION POINT:NA
FLAMMABILITY LIMITS: UPPER: NA LOWER: NA
EXTINGUISHING MEDIA: Water, dry chemical, foam or CO

VI. ACCIDENTAL RELEASE MEASURES

Take up with absorbent material. Place in small container for disposal. Was h spill site w ith
water after material pick up is complete.

VII. HANDLING AND STORAGE

Wear eye protection and gloves when working with this product.

.

2

Avoid contact with eyes and skin.
Store at room temperature. Keep away from heat and keep container closed.

VIII. EXPOSURE CONTROLS/ PERSONAL PROTECTION

OSHA & ACGIH THRESHOLD LIMIT: None listed.
PROTECTIVE EQUIPMENT: Safety glasses, lab coat and gloves.

IX. PHYSICAL AND CHEMICAL PROPERTIES

STATE: Clear colorless liquid ODOR THRESHOLD: None
SENSITIVITY TO MECHANICAL IMPACT: None
SENSITIVITY TO STATIC DISCHARGE: None
COEFFICIENT OF OIL/WATER DISTRIBUTION: None
SOLUBILITY IN WATER: Soluble pH: Approx. 7
SPECIFIC GRAVITY: 1.0
BOILING POINT: Approx. 100ºC MELTING POINT: Not determined
VAPOR DENSITY: Not determined

X. STABILITY AND REACTIVITY

Product is stable. Hazardous polymerization will not occur.
Incompatibles: Bromine trifluoride, potassium permanganate plus sulfuric acid.
Hazardous decomposition product: None.

XI. TOXICOLOGICAL INFORMATION

Route of Exposure: Eyes, skin.
Teratogen Status: None
Mutagen Status: None
Reproductive Toxicity: None
Carcinogen Status: None

XII. ECOLOGICAL INFORMATION

None available.

XIII. DISPOSAL CONSIDERATIONS

Dispose of in a manner consistent with Federal, State and Local regulations.

XIV. TRANSPORT INFORMATION

Product is not hazardous for transport.

XV. REGULATORY INFORMATION

EUROPEAN INFORMATION:
RISK PHRASES: None

SAFETY PHRASES: S24/25 Avoid contact with skin and eyes.
US/ CANADA INFORMATION
SARA/Title III: Ingredients not listed.

Cal. Proposition 65: Ingredients not listed.
US TSCA Inventory: Ingredients are listed.
CPR Class: None.
TDG Class: None.
MSDS discloses elements required by the CPR.

XVI. OTHER INFORMATION

THE ABOVE INFORMATION IS BELIEVED TO BE ACCURATE AND REPRESENTS
THE BEST INFORMATION CURRENTLY AVAILABLE TO US. ALL PRODUCTS ARE
OFFERED IN ACCORDANCE WITH THE MANUFACTURER'S CURRENT
PRODUCTION SPECIFICATIONS AND ARE INTENDED SOLELY FOR USE IN
ANALYTICAL TESTING. THE MANUFACTURER SHALL IN NO EVENT BE LIABLE
FOR ANY INJURY, LOSS OR DAMAGE RESULTING FROM THE HANDLING, USE
OR MISUSE OF THESE PRODUCTS.

MSDS prepared by Environmental, Health and Safety group.

Document Number 264886-001 Rev. A Effective Date: 2/11/2010