-1-
1 Model Description
Model Description (input interface type)
VX2U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1
VX4U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1
Tips: The number, types, functions and specifications of the interfaces of VX2U and VX4U
are basically the same. In this manual, VX4U is described as an example.
2 Appearance
Front Panel
①:
Power switch
②:
Operation screen
(Please see details in the Chapter: Main Interface.)
③:
Knob:
Pressing the knob means Enter or OK and rotating the knob represents
selection or adjustment.
④:
ESC:
Escape current operation or selection.
⑤:
Four control shortcuts
PIP:
Enable/Disable PIP. The indicator light on denotes PIP is enabled, otherwise,
PIP is disabled.
SCALE:
Enable/Disable screen scaling. The indicator light on denotes scale function
is enabled, otherwise, it is unavailable.
MODE:
Shortcut menu for loading or saving dmodels. The indicator light is on
when entering the model or shortcut menu. The indicator light is off after exiting.
TEST:
Shortcut for enabling or disabling test patterns. In case of entering test
picture, the indicator light is on, otherwise, the light is off.
⑥:
Shortcuts for switching of 10 signal input source
. Press to set as the main
screen input source, and long press to set as PIP input source. The setting result
can be viewed on the operation screen while setting.