
Lingo
®
Electronic Assembly
Installation Instructions
DOC. #569066000—B 7/30/04 PRINTED IN U.S.A.

Regulatory Compliance
Safety
Electromagnetic Compatibility
(EMC)
This device has been tested and found to be in compliance with the requirements set forth in UL 916,
Energy Management Equipment, and is listed by Underwriters Laboratories, Inc., for installations in
the United States.
This device has been tested and found to be in compliance with the requirements set forth in C22.2,
No. 205-M1983, Signal Equipment, and is Certified by Underwriters Laboratories, Inc., for installations
in Canada.
Federal Communications Commission (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Disclaimer
NOTE! This device has been tested and found to comply with the limits established for
Class A digital devices. It is intended to be used in a commercial environment.
Operation of this equipment in residential environments may cause harmful
interference, in which case the user may be required to correct the interference
at his own expense.
CAUTION! Any changes or modifications not expressly approved by Novar Controls
Corporation could void your authority to operate this equipment.
Industry Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the interference-causing equipment standard entitled Digital Apparatus,
ICES-003, of Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe A préscrites dans la norme sur le matériel brouiller: Appareils Numériques,
NMB-003, édictée par l’Industrie Canada.
Logic One®and Hawki®are registered trademarks of Novar Controls Corporation.
The material in this manual is for information purposes only. The contents and the product it
describes are subject to change without notice. Novar Controls Corporation makes no
representations or warranties with respect to this manual.
In no event shall Novar Controls Corporation be liable for technical or editorial omissions or mistakes
in this manual, nor shall it be liable for any damages, direct or incidental, arising out of or related to
the use of this manual.
Copyright © 2004 by Novar Controls Corporation. All rights reserved.
No part of this manual may be reproduced in any form or by any means
without prior written permission from Novar Controls Corporation.
6060 Rockside Woods Blvd., Cleveland, OH 44131
Tel: 800.348.1235 www.novarcontrols.com
Novar Controls Corporation

Description
Lingo Specifications
Lingo Electronic Assembly Installation Instructions
The Lingo®Energy Infosystem is the next generation control processor that
functions as a system network manager and control monitor in Novar Controls
Corporation’s Advanced Building Control System.
Lingo monitors and logs the operations of the local control modules, manages
network communications, and provides expandable and integrated control of the
building’s equipment. Lingo’s processing power, compatibility, and multiple
network capabilities provide optimum control to cut energy costs, increase
comfort, and reduce equipment maintenance.
This document provides the installation procedures for mounting the Lingo
electronic assembly, connecting it to the telephone network, and checking the
installation.
Agency Approvals
Listed device: CUL/UL E90949
Standards used: UL 916, Energy Management Equipment
CSA C22.2, No. 205-M1983, Signal Equipment
Power Requirements
Voltage: 24 VAC, Class 2
Consumption: 40 VA
Input/Output Ratings
Analog Inputs: 4 to 20 mA
Digital Inputs: Contact closure only
Output (Fault): 24 VAC or VDC, 2 amp (pilot duty), Class 2
Operating Environment
Temperature: 32° to 140°F(0° to 60°C)
Humidity: 0 to 95% Relative, noncondensing
Physical Dimensions (Electronics only)
Height: 19 inches
Width: 13.25 inches
Depth: 2.5 inches
Weight: 5.85 lb (All aluminum enclosure)
Doc. #569066000—B 7/30/04 1