High-Speed Bearing Oil With Penetrative Additives
American Made • 4-Times Filtered For Purity
For best results, apply to thoroughly cleaned bearings.
Shielded Bearings:
outside of the bearing using a clean cloth. Apply oil along inner
edge of shield to allow oil to penetrate.
Sealed Bearings: Wipe dirt & debris from the outside of bearing.
Use the tip of a hobby knife
along the inner edge of the rubber seals to remove them from the
bearing. Clean exposed bearings with solvent to remove any debris
and old oil/grease. Apply a drop of oil directly to each ball. Replace
cleaned bearing seals
Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin
contact and always observe good housekeeping and personal hygiene measures such as
washing hands after handling the material and before eating, drinking, and/or smoking.
Complete MSDS information available on the Novak web site.
©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2
Wipe any dirt and debris build-up from the
(or a mini flat blade screwdriver)
(flatten seals if they got bent during removal)
to gently pry
.
(949) 916-6044 • Monday-Thursday
www .team nova k.com
NOVAK SPEED LUBE
Loading...