Novak NOVALINK V 1.2 Instructions Manual
INSTRUCTION MANUAL
Version 1.2
8/23/2010
INSTRUCTION MANUAL
TABLE OF CONTENTS
Product Overview ....................................................................................................................... 3
Items Included ........................................................................................................................... 3
Precautions ................................................................................................................................ 4
Minimum System Requirements ................................................................................................. 4
Software Installation ................................................................................................................. 5
Software Registration ............................................................................................................. 6
NovaLink Instructions ................................................................................................................ 8
Startup .................................................................................................................................... 8
Creating & Saving a Profile ..................................................................................................... 9
Uploading/Updating a Profile .................................................................................................. 9
Resetting to Default Settings ................................................................................................ 10
Sharing Profiles ..................................................................................................................... 10
Disconnecting Your ESC ........................................................................................................ 10
Downloading Software Updates ............................................................................................ 10
ESC Firmware Upgrade ............................................................................................................. 11
NovaLink Parameter Definitions ............................................................................................... 12
Settings ................................................................................................................................. 12
Advanced .............................................................................................................................. 17
Comments & Suggestions ......................................................................................................... 19
Troubleshooting ....................................................................................................................... 19
ESC Disconnected During Firmware Update .......................................................................... 19
NovaLink Not Displaying Properly on Windows 7 .................................................................. 19
NovaLink Firmware Updater Displays Error Message ............................................................ 19
Product Warranty ..................................................................................................................... 20
Novak Electronics, Inc. www.teamnovak.com
|
2
PRODUCT OVERVIEW
INSTRUCTION MANUAL
The NovaLink
that easily plugs into the speed control and an included USB cord. Using the integrated software disk,
customers can fine tune the ESC’s multiple parameters by inputting the desired values or using the userfriendly graphic controls. Additionally, each personalized set of parameters can be stored on a PC to recall
and use again later. These custom-made parameter sets can, also, be shared with other drivers. The
NovaLink will never be outdated due to the easy-to-download software updates available to users on
Novak’s Web site. The NovaLink is compatible with Windows® XP™, Vista™, and 7™ computer-operating
platforms.
PROGRAMMABLE PROFILES (KINETIC)
The NovaLink offers expanded adjustability on some of the Kinetic and Kinetic 1S's parameters. These
profiles can only be adjusted through the NovaLink software
• Fine-tune adjustment for Minimum Brake, Drag Brake, Dead Band and Minimum Drive profiles
(these profiles can be minutely adjusted among the preset values featured on the ESC)
• Personalization of the Throttle and Brake Curves
• Fine-tune adjustment for the LiPo/LiFe Cut-Off Voltage value
• Independent Drag Brake toggle
• Graphical view of ESC and motor temperature sampling
• Retrieval of transmitter endpoint values
• Fine-tune adjustment for RPM Select, Applied Timing and Boost Delay
• Ability to store and share settings; a secondary profile can be downloaded onto the ESC from the
Novak website or fellow driver (the driver's main profile can still be adjusted via the speed control's
on-board programming)
• Ability to update the ESC's firmware in the field
TM
provides users with expanded programming adjustability. It comprises a unique module
ITEMS INCLUDED
1. NovaLink USB Adaptor Module
2. USB Cable
3. NovaLink Software Disk
Novak Electronics, Inc. www.teamnovak.com
|
3
INSTRUCTION MANUAL
MINIMUM SYSTEM REQUIREMENTS
Please ensure that the computer you plan to install NovaLink on meets the following minimum
requirements
Operating System Windows® XP
Memory 512 RAM
CPU 1 GHz Processor
Disk 100 MB Disk
Graphics VGA Card (800x600 minimum resolution recommended)
The NovaLink uses a period (.) as the standard decimal separator. This software will not run if a
comma (,) is used instead.
whereas the US and English countries use the period).
(Some European countries use the comma as the standard decimal separator,
TM
, Vista
TM
32-bit , 7
TM
32-bit
PRECAUTIONS
Check for Firmware Updates!
It is important to make sure you have the latest ESC firmware. (Refer to the “ESC Firmware Upgrade
section of this manual).
Check for Software Updates!
It is important to make sure you have the latest NovaLink software updates. (Refer to the “Downloading
Software Updates” section of this manual).
Always Unplug the ESC Fan Before Running NovaLink or Firmware Update!
Please remember to always unplug the ESC fan before using NovaLink or ESC Firmware Upgrade. Leaving
the fan plugged in will result in excess current draw that may disable the USB port and electrical noise
generated by the fan may interfere with communication.
Water and Electronics Don’t Mix!
Never allow water, moisture or other foreign materials to get inside the speed controller or the NovaLink.
Water damage will void the product warranty!
Do NOT put the NovaLink pins close to other metal objects!
Putting the metal pins against another metal object can result in shorting the NovaLink circuit. This
damage is not covered under the product’s warranty.
Plug the ESC into the NovaLink Correctly and Carefully!
The metal pins on the NovaLink can be damaged easily if the ESC is not
plugged into the Novalink carefully. The pins are marked with ”White”
and “Black” labels to aid in connecting your ESC correctly. Make sure to
match the labels on the NovaLink module with the color of the wires on
the ESC as shown in the image to the right.
White
Black
”
Novak Electronics, Inc. www.teamnovak.com
|
4
SOFTWARE INSTALLATION
1. Insert the NovaLink CD
2. Click Start -> My Computer (or -> Computer)
3. Double-click the NovaLink icon
4. Double-click the Drivers folder
5. Install the drivers
a. Windows XP: double-click the file “NovaLink_Drivers”
b. Windows Vista & 7: right-click “NovaLink_Drivers” and click “Run as Administrator”
i. A black command prompt will pop up during installation
6. Once the black command prompt disappears, Plug the NovaLink into the USB
7. Return back to the NovaLink Setup folder by clicking the “Back” button
8. Double-click the Installer folder
9. Install NovaLink by double-clicking on the Setup.exe file
It is important that you plug in the NovaLink
USB Adaptor Module after the black command
prompt disappears to ensure your driver is
installed correctly.
INSTRUCTION MANUAL
Click “Next” to begin the NovaLink Setup Wizard
Novak Electronics, Inc. www.teamnovak.com
|
5
The default installation folder is “C:\Program Files\Novak
Electronics\NovaLink\”. To change the installation folder,
type in the folder path or click “Browse” to select a folder
Click “Next” to continue with the installation
INSTRUCTION MANUAL
Click “Next” to begin installation
Software Registration
After installation, you can register your software by
clicking “Register Now” or if you plan to skip registration,
click “Next”.
The registration form can be found by navigating to
Start -> All Programs -> Novak Electronics.
Registering your NovaLink will ensure that you receive emails from Novak when new versions of the software or
firmware are available.
Novak Electronics, Inc. www.teamnovak.com
|
6
Loading...