Novair B2093694 User Manual

© Copyright 2011 by NOVATEK Corporation

All rights reserved printed in the United States of America. No part of this manual may be used or reproduced in any
form or by any means, stored in data base or retrieval system, without prior written permission from NOVATEK
Corporation.

Making copies of this manual for any purpose other than your own personal use is a violation of the United States
copyright laws.

January 1, 2011 issue 1.0

Specifications subject to changes without notice!

If you have any questions, please contact us:

NOVATEK CORORATION

216 Philips Road
Exton, PA 19341

USA

www.novatekco.com

Toll Free 866 563-7800

Telephone: [phone]

Fax [phone]

Email: [e-mail]

OPERATION AND MAINTENANCE MANUAL FOR

NOTICE

WARNING

F1000-F1002-F1005

FOR PROFESSIONAL USE ONLY

IMPORTANT SAFETY INFORMATION ENCLOSED.

READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.

IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION AVAILABLE TO

OTHERS THAT WILL OPERATE THIS PRODUCT.

FAILURE TO OBSERVE THE FOLLOWING WARNING COULD RESULT IN INJURY.

PLACING MACHINE IN SERVICE

 Always install, operate, inspect and maintain this

product in accordance with all applicable standards and
regulations (local, state, country, federal, etc.).

 Always use proper gauge cord with correct connections.
 Be sure all cords are securely connected to the

recessed male plug.

 Ensure an accessible emergency shutoff when your

machine is connected to power. Make others aware of
its location.

 Do not use damaged, frayed, or deteriorated electrical

cords or connections.

USING THE MACHINE

 Always wear protection when operating or

performing maintenance.

 Always use Personal Protective Equipment

appropriate to the work being performed. This may
include dust mask or other breathing apparatus,
safety glasses, ear plugs, gloves, apron, safety
shoes, hard hat and other equipment,

 If applicable, prevent exposure and breathing of

harmful dust and particles:

Some dust created by power sanding,
sawing, and grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:

- Lead from lead based paints,

- Crystalline silica from bricks and

cement and other masonry
products, and

- Arsenic and chromium from

chemically treated lumber
Your risk from these exposures varies,
depending on how often you do this type of
work.

 Keep others a safe distance from your work area, or

ensure they use appropriate Personal Protective
Equipment.

 This machine is not designed for working in

explosive environments, including those caused by
fumes and dust, or near flammable materials.

 This machine is not insulated against electric

shock.

 Do not leave machines in operation unattended for over

4 hours without inspection.

 Keep all electrical connections clear of water or other

liquid hazards.

 Always turn off and unplug your machine before

performing any maintenance.

 Do not operate the machine while flammable or volatile

liquids such as gasoline, diesel or jet fuel are present.
Failure to do so can result in explosion.

 Keep work area clean, uncluttered and illuminated.
 Do not remove any labels. Replace any damaged labels.

 Keep hands, loose clothing, long hair and jewelry

away from the machines blower assembly and “Air
Intake.”

 To avoid accidental starting – ensure machine in

“off” position before connecting to power.

 Do not carry or drag the machine by the cord.
 Do not operate or maintain the machine under the

influence of medication, drugs, or alcohol.

 Never us a damaged or malfunctioning machines,
 Do not modify the machine, safety devices, or

accessories.

 Do not use this machine for purposed other than

those recommended.

 Only use accessories recommended by Novatek

Corp.

 Whenever applicable, wear safety shoes, hard hat,

safety goggles, gloves, dust mask and any other
appropriate protective clothing in the work area.

 Do no indulge in horseplay. Distraction can cause

accidents.

 Use only proper cleaning solvents to clean parts.

Use only cleaning solvents which meet current
safety and health standards. Use cleaning solvents
in a well ventilated area.

 Do clean machine any parts with diesel fuel or any

other petroleum distillates.

 Do not operate the tool with broken or damaged

parts.

 This tool is not designed for working in explosive

atmospheres.

TABLE OF CONTENTS

SECTION I

Introduction ............................................................................................................................... 2

SECTION II

General Description .................................................................................................................. 2

SECTION III

Routine Maintenance ................................................................................................................ 2

Control Descriptions ................................................................................................................. 3

SECTION IV

Prior To Use ............................................................................................................................... 4

Operation ................................................................................................................................... 4

SECTION V

Replacement Of Filters ............................................................................................................. 4

SECTION VI

Wiring Diagram .......................................................................................................................... 5

SECTION VII

Parts Breakdown ....................................................................................................................... 6

20.1 Diagram Of Unit And Control Panel ................................................................................ 6

SECTION VIII

Safety .......................................................................................................................................... 7

Troubleshooting ........................................................................................................................ 7

Novatek Corporation Limited Warranty .................................................................................. 8

1