Nova FPA-0-1821-33, FPA-0-1821-24, FPA-0-1821-27, FPA-0-1821-28, FPA-0-1821-30 Assembly Instructions Manual
...
The natural way to look at a computer™
Flat Panel Display Arm
Retrofit Kit
Assembly Instructions
Model #
FPA-0-1821
Widescreen Format
-24, -27, -28, -30, -33, -34
The arm ships with two VESA plates. Determine the one you need by holding VESA
plates up to the attachment holes on the back of the monitor. Select the one where
all four holes line up with the VESA plate holes.
Step 1.
Cut opening for viewport. (Figure 1A). Prepare surface for keyboard
drawer (Figure 1B).
Step 2.
Using the desk bracket (B) as a template, locate and drill bracket holes
(Figure 1A). Note drill size and hole depth!
Figure 1A
UNDERSIDE OF TOP
24"(609.6 mm) Minimum Depth Of Worksurface
3
/16" Dia.
5
/8" Deep
6 Places
0.25"
24"
(609.6 mm)
1
/2"(12.7 mm) R.
All corners
FRONT EDGE
Center on
viewport opening
11
20
/16""
mm
)
(526
DESK BRACKET
1.26"(32 mm)
18 ¼"
(464
1.26"
(32
mm)
3"
(76 mm)
mm)
Includes
Flat panel display arm,
keyboard drawer,
visor, glass &
trim ring
Figure 1B -
21/2"
(64 mm)
"
4
(102 mm)
1-1/4"
(
Offset 32mm)
(Typ.)
Hole pattern for keyboard drawer
3
/16" Dia.
5
/8" Deep
6 Places
FRONT EDGE
A
KB drawer size
27"
28"
30"
33"
34"
Dimension A
2219/32"(574 mm)24"
5
/16"(643 mm)
25
1
/8"(664 mm)
26
1
/16"(713 mm)
28
1
/4"(794 mm)
31
321/8"(816 mm)
PACKING LIST
QTY REF # ITEM # DESCRIPTION
1
A1 75 mm *VESA plate
1 A2 100 mm *VESA plate
1 B Desk bracket
1 C
10 D 1412APPBO Screw, #14 x 3/4"
4 E 50900219 Screw, Silver,
1 F 20060126
1 G 20060127
1 H Varies Keyboard drawer
1 J AC-SG10721821W Viewport glass
2 L 50900032 Screw - #14 x 1-1/2"
4 M 6N50TXPZ Security screw #6 x 5/8"
4 N 50900034 Trim ring corner
2 O1 50900035 Trim ring straight - B
2 O2 50900036 Trim ring straight - A
1 P 5081062 Visor
2 Q FR2121/Clip Locking tab
4 S
*VESA 75/100 Standard
FPA-8-2006
924B-2520-0-50A
Wing nut
Keyboard hanger w/ glide - left
Keyboard hanger w/ glide - right
10628-03819 Screw, Black, 4mm x 0.7 x 8
4mm x 0.7 x 10
P.O. Box 725 • 421 W. Industrial Avenue • Effingham, Illinois 62401 • Phone: (800) 730-6682 • Fax: (800) 940-6682 • info@novasolutionsinc.com • www.novadesk.com
IIR017 FPA-0-1821 Widescreen Asy. Instr. 01/2012 © Nova Solutions, Inc. 2012
Patents pending.
Page 1
Step 3.
Step 5
Align holes in desk mounting bracket (B) with holes in worksurface
(Figure 2). Attach using screws (D).
WARNING: Removing the set screws or oiling the joints could cause
the flat panel display to fall and void the warranty.
Figure 2
Back edge of cut-out
B
A1
D
C
A2
S
Step 4. Attach flat panel display to VESA plate
Remove flat panel display base. Attach flat panel display to VESA plate
with screws (E, Figure 3). Depress silver spring pin on VESA plate
extension tube and slide it into the desk mount extension tube. Tighten
wing nut (C, Figure 4). See "Monitor Angle" for adjustment guidance.
When installing some Apple® flat panel displays, a VESA Adapter
(Model #50-8-4100) may be necessary. Contact Customer Support
for more information.
Attach
keyboard
Figure 5
hangers (F,G, Figure
5) to underside of
worksurface with screws
(D, E). Insert outward
locking tab (R) by pulling it
forward to lock in place.
IMPORTANT:
D
L
The longer screws
F
L
(L) pass through the tubular
section of the keyboard
D
hanger. That allows the
assembly to be leveled by
loosening or tightening the
screws.
Q
Step 6. Install trim ring & viewport glass
Snap trim ring
pieces (N, O1, O2) together.
Insert into viewport cutout
and attach with screws
(M). Carefully insert
viewport glass into trim
ring. Slide keyboard
tray into glides.
G
O2
N
O1
Figure 3
75 mm
15
(2-
/16")
75 mm
15
(2-
3-3/4"
A1
/16")
Display
A2
100 mm
15
(3-
/
16
")
100 mm
15
(3-
/
16
")
7
4-
/
16
"
Figure 4
viewport cut-out
C
Extension tubes
IIR017 FPA-0-1821 Widescreen Asy. Instr. © Nova Solutions, Inc. 2012
Monitor Angle
E
VESA Plate
Adjustment
1. Locate screen as high as possible without raising glass.
2. Aim screen slightly above user’s eyes. (Bottom of screen should be
closer to eyes than top of screen.)
3. Preferred location is with top edge of flat panel display at back
edge of glass.
4. For semi-recessed positions, remove viewport glass and
raise flat panel display.
270°
Desk Bracket
Adjustment
320°
Page 2
Loading...