Notion Information Technology CPE User Manual

LTE CPE Quick Start

1．Getting to know your router

Power

On: the device is powered on.

Off: the device is powered off.

①

indicator

Steady blue: power on the device by
the battery or the power adapter
Blue flicker: charging the battery
Steady blue: finish charging
Red flicker：battery power is less than
10%

②

network mode

Wi-Fi indicator

④LAN indicator

Signal strength

⑥battery back

indicator

③

⑤

indicator

Steady blue：connected to a 4G
network.
Blue flicker：4G data transfer.
Steady red：

---The SIM card is not recognized, the
PIN has not been entered, or the PIN
verification failed.

---Failed to connect to a mobile
network or an Ethernet network.
Red flicker：Looking for network.

Steady on：Wi-Fi turned on.
Off: Wi-Fi turned off.

Steady on：At least one of the LAN
ports is connected to a device.
Blinking：data is being transmitted
through a LAN port
Off：No device is connected to a LAN
port.

On：signal reception available(more
bars mean better reception).
Off：no reception.

cover

⑦⑧LAN port

Connect to computer, switch, or
other LAN device.

⑨power butto n

on or off;

⑩Power port

Connect to compatible power

⑪WPS/Re set

⑫

Press for 2 seconds to active WPS

settings.

⑬SIM card slot

Install a standard SIM card to access
the internet via an LTE data

⑭USB port

Connect to compatible USB adapter.

Only for upgrade software）。

Press the button to power the devi ce

adapter.

button

Battery port

connection when Wi-Fi is turned on.

!! Restoring the default settings of
the device will erase all previous

When the device is powered
on ,press the reset button and hold
for about 8 seconds to restore the
device to its factory settings. After
the factory defaults are restored, the
device will restart automatically.

Connect to compatible batte ry

connection.

（

2．Installation

Scenario 1：Accessing the Internet using an LTE network

Step 1：Installing the SIM card

1. Power off the device.

2.Slide off the battery back cover.

3.Insert the SIM card into the card slot.

4.Close the battery back cover.

！！ Do not remove the SIM card when it is in use, Doing so will
affect the performance of your device and data stored on the SIM
card may be lost.

：Installing the battery

Step 2

1. Power off the device.

2. Slide off the

3.Insert the battery into the battery slot, connect the
battery with the device by the connector.

4.Close the

battery back cover.

battery back cover.