Zareba Sensepoint Pro
Comprehensive monitoring of
flammable, toxic and oxygen
gas hazards in potentially
explosive atmospheres
The Sensepoint Pro provides
comprehensive monitoring of flammable,
toxic and oxygen gas hazards in potentially
explosive atmospheres, both in and out of
doors. Users can modify detector operation
using the remote control provided without
ever needing to open the unit. This enables
one man, non-intrusive, operation and
reduces routine maintenance time and costs.
All detectors are supplied pre-configured and
include two programmable alarm relays as well
as an industry standard 4-20mA output.
The scale, range, calibration, relay operation
and alarm set points of the detector may all be
adjusted via the transmitters’ backlit LCD and
an intrinsically safe remote control that is also
suitable for use in potentially explosive
atmospheres. Outputs are automatically
inhibited during adjustment thereby reducing
the risk of false alarm at the control panel
during maintenance.
Sensepoint Pro is supplied with all necessary
accessories for easy installation. The detector
can be mounted on a wall or round support
pole using the universal bracket provided.
The detector is ideal for use with either conduit
or steel wire armored cable and glands.
A 3/4”NPT entry and M20 adaptor are
included as standard. A weatherproof cap is
also included for use in the harshest outdoor
conditions.
Overall, the Sensepoint Pro ensures easy
installation and the fastest routine operation by
removing the need for hot work permits in
hazardous areas. Using an easy to replace
plug-in sensor, downtime is also reduced and
on-going costs are minimized through the use
of poison resistant flammable sensors and
patented SurecellTM toxic sensor technology.
Sensepoint Pro meets the more demanding
user requirements but assures you of the most
cost effective solution to your gas detection
needs in the long run.
One-Stop Shop
• Flammable, toxic and oxygen versions
available
• Suitable for indoor or outdoor use
• IP65 as standard
Proven Sensor Technology
• SurecellTM electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life
Global Certifications*
• US, Canada and Europe
• Compliant with UL, CSA and ATEX
standards
• Includes hazardous area AND
performance approval
Convenient to Use
• Backlit LCD for dark environments
• Fully configurable via IR remote control
• 4-20mA and relay operation
• Auto-inhibit during maintenance
Cost Effective
• Minimal training required
• Non-intrusive, one-man operation
• Plug-in sensor replacement
• All necessary accessories included
Friendly Installation
• Universal mounting bracket
• 3⁄4” NPT and M20 entries included
as standard
• Suitable for conduit or SWA cable/
glands installations
Range of Accessories
• Flow adaptor
• Duct mounting kit
• Collecting cone
*Pending - Contact Honeywell Analytics for more
information
Sensepoint Pro
Installation Details
Installation Details
Sensepoint Pro is designed for use in potentially
explosive atmospheres. As such, installation
should follow national guidelines using suitably
approved steel wire armored cable and glands
(M20 or 3/4”NPT) or conduit (3/4”NPT).
Use 0.5mm2 (20AWG) to 2.5mm2 (14AWG)
cross sectional area cable, as needed to ensure
minimum operating voltage at the detector,
depending upon installed cable length.
Various accessories are available for different
applications.
Poie Mount Wall Mount
Duct Mount Collecting Cone
Dimensions
Electrical Connections
//
//
//
//
//
//
//
Technical Summary
General Specification
Use 3 wire, 4-20mA, fixed point gas detector with built in alarm relays for the protection
Detectable Gases
Gas Measuring Range Operating Temperature*
Ident Name 1# 2 3 Min Max
F Flammable 0-100% LEL -20°C / -4°F 50°C / 122°F
O Oxygen 0-25% VOL -15°C / 5°F 40°C / 104°F
C Carbon Monoxide+ 0-200ppm 0-500ppm -20°C / -4°F 50°C / 122°F
H Hydrogen Sulfide+ 0-50ppm 0-20ppm 0-100ppm -20°C / -4°F 50°C / 122°F
G Hydrogen 0-1000ppm -5°C / 23°F 40°C / 104°F
+
SurecellTM Sensor Technology
Electrical
General 3 wire connection, 12-30Vdc, 4-20mA (source), common 0Vdc
Signal 22mA Maximum over range
4-20mA Normal operation: 0-100% full scale
2mA or 4mA Output inhibited (2mA or 17.4mA for oxygen)
0mA Fault
Alarm Relays 2 x 3A@240Vac alarm relays
User configurable alarm trip point, normally energized/de-energized operation
Link selectable output as NO or NC
of personnel and plant from flammable, toxic and oxygen gas hazards. Incorporating
transmitter with local display and fully configurable via remote handheld control
#
Standard range *Check certified temperature
7 x screw terminals for O.5mm2 (20AWG) to 2.5mm2 (14AWG) wire
Maximum operating current: 300mA (flammable), 150mA (toxic and oxygen)
Maximum peak in rush current: 600mA
Construction
Material Main body: Powder coated aluminum (ADC12)
Sensor: 316 stainless steel
Weatherproof cap: Aluminum, 316 stainless steel mesh
Weight 1450g
Certification Sensepoint Pro Sensepoint Pro Remote Control ZHC1
ATEX Ex II 2G EEx d IIC T4 Ex II 2G EEx ib IIC T4
(Tamb = -20°C to +50°C / -4°F to +122°F) (Tamb = -20°C to +50°C / -4°F to +122°F)
UL Class 1, Div 1, Groups B, C, D Class 1, Div 1, Groups A, B, C, D
(Tamb = -20°C to +50°C / -4°F to +122°F) (Tamb = -20°C to +50°C / -4°F to +122°F)
Applicable Standards North America: UL1203
Europe: CE, ATEX, EMC (EN50270)
Contact Honeywell Analytics for latest information
Environmental
IP Rating IP65 as standard in accordance with EN60529:1992
Operating Temperature Dependent upon gas type and certification
Operating Humidity Range Continuous: 20-90%RH (non condensing), Intermittent: 10-99%RH (non condensing)
Operating Pressure 90-110kPa
Storage Conditions Instrument -40°C to +50°C (-40°F to +122°F)
* Oxygen detection products must only be used to detect oxygen depletion in air.
Ordering Information
Ordering Information
Standard Supply
Each detector is supplied complete with IS remote control, 3⁄4”NPT entry, 3⁄4”NPT to M20
adaptor, wall mounting bracket, pole mounting bracket, weatherproof cap, necessary Allen
keys and instruction manual all sealed in a plastic bag inside a shipping carton
Shipping Details
Shipping carton dimensions: L312mm (12.3”) x W223mm (8.8”) x D110mm (4.3”)
Approximate weight: 1.5Kg (3.3llbs)
Optional Accessories
SPPPCC Collecting cone
SPPPCAL Flow adaptor
SPPPDM Duct mounting kit
Calibration Equipment
Contact Honeywell Analytics Representative
STANDARDS
U USA (UL)
A Europe (ATEX)
RANGE
1 Refer to
2 Detectable Gases
3 Table Above
e.g. SP PR U X F 1 = SPPRUXF1
GAS TYPE
F Flammable
O Oxygen
C Carbon Monoxide
H Hydrogen Sulfide
G Hydrogen
}
H_Sensepoint Pro_DS0328_V1
12/05
© 2005 Honeywell Analytics
11078
Find out more
www.honeywellanalytics.com
Customer business centre
Europe and the rest of the world
Honeywell Analytics AG
Wilstrasse 11-U11
CH-8610 Uster
Switzerland
Tel: +41 (0)44 943 4300
Fax: +41 (0)44 943 4398
sales@zelana.co.uk
Customer business center
A
mericas
Honeywell Analytics Distribution, Inc.
400 Sawgrass Corporate Pkwy
Suite 100
Sunrise, FL 33325
USA
Tel: +1 954 514 2700
Toll free: +1 800 538 0363
Fax: +1 954 514 2784
sales@zelana.com
www.honeywell.com
As World leaders in gas detection solutions, Honeywell Analytics’
Zareba range of gas detection systems has been designed to
provide efficient, practical and cost-effective equipment to protect
people from a variety of forms of hazardous gas. The equipment
is also simple to install and easy to operate and maintain.
Sensepoint Sensepoint Plus Sensepoint Pro
The Zareba range of fixed gas detection
Touchpoint 1
Touchpoint 4
Metro Metro controller
Sensepoint range
Designed for industrial use, the Sensepoint range provides an easy
way of ensuring legislative requirements are met.
Touchpoint
Designed for industrial use, the Touchpoint range provides an easy
way of ensuring legislative requirements are met. It is particularly
suited where a number of small, discrete, stand-alone systems
are required.
Metro
For commercial environments such as car parks, municipal
buildings and retail facilities, Metro offers a fully programmable,
addressable gas detection system.
Unipoint
Unipoint is a simple DIN rail mounted controller offering integrators
a flexible and low cost solution to incorporate flammable, toxic or
oxygen gas detection into their control systems. From car parks
and boiler houses to analyzer shelters or crane cabs in
offshore facilities.
Please Note:
While every effort has been made to ensure
accuracy in this publication, no responsibility
can be accepted for errors or omissions.
Data may change, as well as legislation, and you
are strongly advised to obtain copies of the most
recently issued regulations, standards, and guidelines.
This publication is not intended to form the
basis of a contract.
© 2005 Honeywell Analytics
Loading...