Rev. 8/12/09
ICE SHOT DISPENSER
Model # CSD-250
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Visit Us Online at
www.nostalgiaelectrics.com
©2009 Nostalgia Products Group LLC
For Household Use Only
Read These Instructions Before Using This Unit!
Save These Instructions!
4
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN YOU FIRST TAKE IT OUT OF
THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
Should you have any questions, please contact us via email or at the customer service number
listed be low between the ho urs of 8:00 AM and 5:00 PM, Monday throu gh F ri day , Central
Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Part n ers hip Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: (920) 347-9122
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and fill out the
Customer Service Inquiry
This appliance is designed and built to provide many years of satisfactory performance under
normal ho us eh old use. The dis tributor ple dg es t o the ori ginal owner that should ther e be any
defects in material or workmanship during the first 90 days of purchase, we will repair or replace
the unit at our option. Our pledge does not apply to damages caused by shipping, mishandling
or unit being dropped. A product deemed defective either from manufacturing or being
mishandled is up to the distributor’s discretion. In order to obtain service under this warranty,
please contact Nostalgia Products Group, LLC at the telephone number listed above or by filling
out the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warr anty do es not apply to re-manufac t ur e d m erc handise.
Please read these instructions carefully. Failure to comply with these instructions, damages
caused by improper replacement parts, abuse or misuse will void this pledge to you and is being
made in place of all other expressed warranties.
form and click the Submit button. A representative will
contact you as soon as possible.
ICE SHOT DISPENSER™
CSD-250
Limited Warranty
1
IMPORTANT PRECAUTIONS
A. NEVER place on (or near) a hot gas or electric burner or in a heated oven.
B. Keep out of the reach of children.
C. DO NOT place in dishwasher.
D. This ICE SHOT DISPENSER™ is NOT A TOY!
ABOUT YOUR ICE SHOT DISPENSER™
This unit is an insulated liquor shot dispenser that uses ice for refrigeration. Unlike simply
pouring over ice, the ICE SHOT DISPENSER™ breaks the traditional limitation of “watering
down” the original taste. The cooling system operates as a result of circular, aluminum pipes
inside the dispenser. When alcohol flows through the pipes, it immediately becomes cold due to
the ice surrounding.
BREAKDOWN…
Bottle St op per
SUPPLIES NEEDED...
Rock Salt
1/2 Cup Boiling Hot Water
1/2 Cup Ice Cold Water
Crushed Ice
Favorite Liquor
SET UP AND OPERATION...
1. First, prepare a mixture of 2 Tablespoons of Rock Salt in 1/2
cup of boiling hot water. Allow the salt to dissolve. Add the 1/2
cup of ice cold water to cool down.
2. Open the lid from the top of the dispenser, and put ice into the
bucket. Pour the salt water mixture over the ice to expedite
its frost effect, and close the lid.
Dispenser
Lid
Lid
Ice Bucket
2
ABOUT YOUR ICE SHOT DISPENSER™ (Continued)
Open your liquor bottle. Insert the
Bottle St op per in to th e bottlenec k tight ly .
Bottle St op per
3. Turn the bottle upside down and insert the bottle
with the bottle stopper into the flow position
(above the dispenser) tightly.
Flow Position
4. Place a shot glass under the spout. Push the handle
forward. After about 60 seconds, your cold alcohol
shot will pour out while retaining all the
intensity of the flavor.
5. As the ice melts, water will collect in a reservoir
inside the dispenser unit. Place a cup under the
drain nozzle located at the back side of the dispenser,
and remove the nozzle plug. Allow to drain completely.
Replace the nozzle plug when reservoir is emptied.
Nozzle & plug
Spout
Handle
3
CLEANING
The ICE SHOT DISPENSER™ is easy
by filling an empty bottle with hot water and allowing it to flow out through the spout. You can
also fill the ice bucket with hot water and allow it to flow through the aluminum coil s. Dispose of
the water through the dispenser rear nozzle and plug.
To maintain the exterior finish of the ICE SHOT DISPENSER™, wipe down using a non abrasive
sponge or cloth with warm sudsy water and dry with a non abrasive clean cloth.
to clean. Simply run hot water through the bottle stopper
Loading...