Nostalgia Electrics CCP810 User Manual [en, es, fr]
All products are trademarks of Nostalgia Products Group, LLC.
Tous les produits sont des marques de commerces de Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
Conception mondiale et utilités brevetées ou brevets en instance.
© 2012 Nostalgia Products Group, LLC.
2013
www.nostalgiaelectrics.com
(rev. 04/19/13)
CCP810
Popcorn Dispensing Cart
Carrito dispensador de palomitas de maíz
Chariot de distribution de maïs soué
Instructions and Recipes | Instrucciones y recetas |
Consignes et recettes
Make every day a party!
Visit www.nostalgiaelectrics.com for more fun products.
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY
ENGLISH
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
Appliance Specications:
120 Volts, 60 Hz
770 Watts, ETL Approved
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
2
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge nor cloth.
4. NEVER use a scouring pad on the appliance.
ENGLISH
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity
of the appliance to ensure their safety.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not
touch Kettle while operating; it gets very HOT.
3. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
4. To avoid re or shock hazard, or damage to the unit, this unit should
be plugged into a polarized 120 Volt AC outlet ONLY.
5. Close supervision is necessary when any appliance is used near children.
6. Unplug from outlet when not in use, before removing parts and before cleaning.
7. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
8. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
9. DO NOT use outdoors.
10. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
3
11. DO NOT leave Kettle motor running once popping has ceased.
12. Extreme caution must be used when moving this appliance.
13. DO NOT use the appliance for other than its intended use.
14. An appliance that is plugged into an outlet should not be left unattended.
15. Check Kettle for presence of foreign objects prior to use.
16. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
17. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
18. Longer detachable power supply cords can be used if care is exercised in their use.
19. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
20. This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is
intended to t into a polarized outlet only one way. If the plug does not t, contact
a qualied electrician. Do not attempt to modify the plug in any way.
21. Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualied service personnel.
SAVE THESE INSTRUCTIONS!
ENGLISH
INTRODUCTION
Thank you for purchasing the POPCORN DISPENSING CART, a product in Nostalgia Electrics’
Vintage Series™. This vendor-style popcorn cart will be the hit of every party! It pops up to 32
cups of hot, fresh, kettle cooked popcorn per batch. It features a large, stainless steel kettle
with a built-in stirring system and kernel catcher to keep unpopped kernels out of each
perfect batch. Once the popping stops, place the included bucket inside the compartment
and turn the handle to dispense fresh, hot popcorn right into the bucket. The POPCORN
DISPENSING CART’s unique gravity feed dispensing system and accessible height makes
serving a snap. With its easy-to-clean design, making popcorn has never been more fun!
4
PARTS & ASSEMBLY
第1页
#1 Screw(10mm)
Qty.4
#2 Bolt(10mm)
Qty.8
#3 Bolt(65mm)
Qty.2
#4 Flat Washer
Qty.4
第1页
#2 Bolt(10mm)
Qty.8
#3 Bolt(65mm)
Qty.2
#4 Flat Washer
Qty.4
#4 Flat Washer
Qty.4
#8 Concession Stand
Handle Bracket
Qty.1
第1页
#1 Screw(10mm)
Qty.4
#2 Bolt(10mm)
Qty.8
#3 Bolt(65mm)
Qty.2
#4 Flat Washer
Qty.4
#6 Nut Cap
Qty.4
#7 Concession Stand
Handle
Qty.1
#5 Flat Washer
Qty.12
#8 Concession Stand
Handle Bracket
Qty.1
第1页
Hardware
ENGLISH
#1 Screw (10mm) #2 Bolt (65mm) #3 Flat Washer #4 Flat Washer
Qty. 12 Qty. 2 Qty. 10 Qty. 12
#9 Concession Stand
Handle Screws (8mm)
#5 Spring Locking
Washer
Qty. 4
Qty. 2
#6 Nut Cap
Qty. 4
#10 Kernal Catcher
#7 Door Handle
Qty. 1
#8 Concession Stand
Door Plate
Qty. 1
5
Parts
第2页
第3页
(A) Main Unit (B) Kernel Measuring (C) Concession (D) Popcorn Bucket
Cup and Oil Stand (4 quart)
Measuring Spoon
(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrench
ENGLISH
(I) Base Support (J) Cross Bar (K) Leg Assembly (L) Popcorn Scoop
Assembly of Handles
1. Attach #7 Handle and parts to Concession Stand (C) as shown:
SCREW(12mm)
HANDLE
HANDLE BRACKET
SCREWS(8mm)
DOOR PLATE
6
Assembly of Base Support
第4页
第4页
第3页
HANDLE
HANDLE BRACKET
SCREW(12mm)
SCREWS(8mm)
DOOR PLATE
1. Push Handle (E) attaches onto the Concession Stand (C) using the four supplied #2 Bolts.
ENGLISH
2. Insert Cross Bar (J) into the square inserts on the inside of Base Support (I) and secure from
below with two #1 Screws, two #4 Flat Washers and two #5 Spring Locking Washers. Insert
the Leg Assembly (K) into the square inserts between the ends of the Base Support (I) and
fasten from inside with two #2 Bolts, two #4 Flat Washers, two #3 Spring Locking Washers
and two #6 Nut Caps. Also secure from above with two #1 Screws and two #4 Flat Washers.
3. Assemble Base Support (I) into the bottom of the Concession Stand
(C) and secure with four #1 Screws and four #4 Flat Washers.
7
Assembly of Wheels
1. Put #3 Flat Washer onto Axle Bolt (F) and insert into Base Support (I).
2. Put on #3 Flat Washer. Slide Wheel (G) onto Axle Bolt (F), then add a
second #3 Flat Washer, #5 Spring Locking Washer and #6 Nut Cap.
3. Use Wrench (H) to tighten the #6 Nut Cap.
4. On the other side of Base Support (I), insert second Axle Bolt (F) with
#3 Flat Washer, add #3 Flat Washer, second Wheel (G), another #3
Flat Washer, #5 Spring Locking Washer and a #6 Nut Cap.
ENGLISH
(#3)
Flat
Washer
(#6)
Nut
Cap
(#5)
Spring
Locking
Washer
5. Use Wrench (H) to tighten the #6 Nut Cap.
(#3)
Flat
Washer
(F)
Axle
Bolt
(G)
Wheel
(I)
Base
Support
Assembly of Main Unit
1. Place Main Unit (A) onto the top of the Concession Stand (C).
2. Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly
so that Main Unit (A) can be locked under the beam of the Concession Stand (C).
8
HOW TO OPERATE
Before rst use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
ENGLISH
Dispenser
Handle
1. First, nd a at surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bucket or bowl for holding
the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon. (Bucket,
Kernel Measuring Cup and Oil Measuring Spoon are included with your unit.)
3. Make sure Kettle is properly secured in support brackets
and that the Kettle motor is plugged in.
4. Plug in the appliance while switch is ipped to OFF position.
5. Turn appliance ON by ipping the switch on the top of the machine (see illustration above
for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.
6. Once Kettle has heated, turn unit OFF before adding ingredients.
7. Use the Oil Measuring Spoon (1 Tbsp.) supplied with your POPCORN DISPENSING CART
to add up to 4 tablespoons of your favorite popcorn cooking oil to the Kettle. (For every
8-oz. kernels add 4 tablespoons of oil. For best results, vegetable oil is recommended.)
8. Add up to 8-oz. popcorn kernels to the Kettle using supplied Kernel Measuring Cup.
9. Close the door and turn unit ON. Turn the light switch to the ON
position to turn on the light and activate the Popcorn Warmer.
10. In no time at all, you will hear the popping begin. Fresh, hot popcorn will
begin to burst out of the ip lids on the Kettle - just like at the theater!
11. Once the popping stops, place the included Bucket inside the center
of the Concession Stand. Turn the Dispenser Handle 180 degrees
clockwise, then 180 degrees counterclockwise. Repeat until desired
amount of popcorn dispenses into your Bucket or serving bowl.
ON / OFF & Light
Crank Handle
Stainless Steel Kettle
Popcorn Dispenser
9
HELPFUL TIPS
SMOKING
If your POPCORN DISPENSING CART begins to smoke during cooking,
it may be due to grease build up. In order to reduce smoking, make
sure that you clean the inside of the Kettle between uses.
POPCORN
For best results, use an all-natural soft-shelled popping corn. Organic popping corn is not
recommended for use in your POPCORN DISPENSING CART as it has a harder husk and will result
in more unpopped kernals.
CLEANING & MAINTENANCE
1. Make sure appliance is unplugged before cleaning. Unplug the outer plug
to the outlet as well as the Kettle motor plug inside the Main Unit.
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside
and outside of Main Unit, then wipe with a non-abrasive towel to dry.
3. Unplug Kettle motor and remove Kettle from support brackets.
4. Take Kettle out of the Main Unit. The Lid of the Kettle removes easily for cleaning.
Simply unscrew Wing nuts from Kettle Lid. Lift Lid from Kettle to clean. After
removing Kettle from Main Unit, ll ²⁄ ³ of Kettle with hot, soapy water.
5. Let the Kettle sit for 15 – 20 minutes to cut the grease. (Time may vary – use
your own judgment depending on the amount of cleaning necessary)
6. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
7. Rinse inside carefully and dry.
8. Wipe outside of Kettle with damp cloth and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
EASY CLEAN KETTLE
ENGLISH
Lid
Wing nut
Kettle
10
Loading...