All products are trademarks of Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
2014
© 2012 Nostalgia Products Group, LLC.
www.nostalgiaelectrics.com
(rev. 09/18/14)
CCP310B
Old Fashioned Movie Time Popcorn
Cart with Concession Stand
Instructions and Recipes
Make everyday a party!
Visit www.nostalgiaelectrics.com for more fun products.
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SAFETY
ENGLISH
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
Appliance Specications:
120 Volts, 60 Hz
380 Watts, ETL Approved
2
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge or cloth on the appliance.
4. NEVER use a scouring pad on the appliance.
ENGLISH
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity of the
appliance to ensure that they do not play with it.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not touch Kettle while
3. To protect against electrical shock do not immerse cord, plug or
4. Close supervision is necessary when any appliance is used near children.
5. Unplug from outlet when not in use, before removing parts and before cleaning.
6. DO NOT operate any appliance with a damaged cord or plug, nor if
7. The manufacturer does not recommend the use of accessory
8. DO NOT use outdoors.
9. Position the appliance as close to the outlet as possible
10. DO NOT leave Kettle motor running once popping has ceased.
11. Extreme caution must be used when moving this appliance.
operating; it gets very HOT.
any part of this appliance in water or other liquids.
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
attachments. Use of accessory attachments may cause injuries.
to prevent injury due to tripping over cord.
3
12. DO NOT use the appliance for other than its intended use.
13. An appliance that is plugged into an outlet should not be left unattended while in operation.
14. Check Kettle for presence of foreign objects prior to use.
15. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
16. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
17. Longer detachable power supply cords can be used if care is exercised in their use.
18. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
19. This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to t into a polarized outlet only one way.
If the plug does not t fully into the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN CART with
CONCESSION STAND! This 48" tall vendor-style popcorn cart will be the hit of every
party. It yields up to ten cups of hot, fresh, kettle cooked popcorn per batch. The
large, stainless steel kettle has a built-in stirring system, resulting in perfectly delicious
popcorn every time. This cart has an easy-to-clean design, and a compartment in the
base of the unit to store supplies. Your favorite candies can be displayed in the two
shelf concession stand. The vintage look and feel will complement any room, and
its accessible height makes serving a snap. With the OLD FASHIONED MOVIE TIME
POPCORN CART with CONCESSION STAND, popcorn never tasted so good at home!
ENGLISH
4
PARTS & ASSEMBLY
Hardware
ENGLISH
#1 Bolt (10mm) #2 Bolt (38mm) #3 Bolt (60mm)
Qty. 10 Qty. 2 Qty. 2
#4 Screw (10mm) #5 Screw (15mm) #6 Flat Washer (6mm) #7 Flat Washer (8mm)
Qty. 4 Qty. 2 Qty. 10 Qty. 8
#8 Locking Washer #9 Magnet #10 Nut Cap #11 Nut
Qty. 4 Qty. 1 Qty. 2 Qty. 2
#12 Door Handle #13 Sleeve Barrel #14 Screw (8mm)
Qty. 1 Qty. 2 Qty. 8
5
Parts
(A) Main Unit (B) Storage (C) Push Handle (D) Bottom Plate
Compartment
(E) Wheel (2) (F) Base Support (G) Cross Bar (H1) Kernel Measuring
Qty. 2 Qty. 2 Cup (2-oz.)
ENGLISH
(H2) Oil Measuring (I) Leg (J) Popcorn Scoop (K1) Wrench
Spoon (1 Tbsp.) Qty. 2
(K2) Wrench (L) Concession Stand Tiers
6
Assembly of Storage Compartment with Concession Stand
1. Attach Push Handle (C) from inside Storage
Compartment (B) using two #1 Bolts and two
#6 Flat Washers. Attach two #11 Nuts to bottom.
ENGLISH
2. Attach Concession Stand Tiers (L) to Storage
Compartment (B) using four #14 Screws.
NOTE: Battery for lighted Concession Stand is
located on the bottom side of the Concession
Stand. When replacing the AA batteries, be sure
polarity is correct (i.e. match (+) end of battery to
(+) end of battery pack) or steps will not light.
Assembly of Base Support
1. Attach Cross Bar (G) to Base Support (F) and secure with
four #1 Bolts and four #6 Flat Washers.
2. Secure Bottom Plate (D) to Base Support (F) using four #1 Bolts and four #6 Flat
Washers. Make sure the screw holes on Bottom Plate (D) are to the left of the
protruding ends of the Base Support (F) as shown in the diagram below.
3. Attach Legs (I) to protruding ends of Base Support (F) using two #2 Bolts, two #7 Flat
Washers and two #8 Locking Washers.
7
4. Assemble Base Support (F) into the bottom of the Storage
Compartment (B) and secure with four #4 Screws.
5. Secure Bottom Plate (D) to Storage Compartment (B) using four #14 Screws.
Assembly of Wheels
1. Place #7 Flat Washer onto #3 Bolt and insert into predrilled hole on inside of Base Support (F).
2. Put #7 Flat Washer and #13 Sleeve Barrel on end of inserted #3 Bolt.
3. Attach the Wheel (E) to the #3 Bolt. Place #7 Flat Washer and #8 Locking Washer on
Wheel (E). Use the end of Wrench (K2) with small notch to hold the #3 Bolt in place.
While holding #3 Bolt in place, tighten the #10 Nut Cap with Wrench (K1).
4. Repeat on other side, following the directions above.
(#7)
Flat
Washer
ENGLISH
(#8)
Locking
Washer
(#10)
Nut
Cap
(#13)
Sleeve
Barrel
(E)
Wheel
(#3)
Bolt
(#7)
Flat
Washer
(F)
Base
Support
8
Assembly of Main Unit
ON / OFF / LIGHT Switch
ENGLISH
Attaching Door Handle
1. Attach #9 Magnet to transparent door of Main Unit (A).
2. Place #12 Door Handle using two #5 Screws.
3. Place Main Unit (A) onto the top of the Storage Compartment (B).
4. Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly so
that Main Unit (A) can be locked under the beam of the Storage Compartment (C).
Crank Handle
Stainless Steel Kettle
9
HOW TO OPERATE
Before rst use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
1. First, nd a at surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for holding
the popcorn, cooking oil, Kernel Measuring Cup (H1) and Oil Measuring Spoon (H2).
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit.)
3. Plug in the appliance while switch is ipped to OFF position.
4. Make sure Kettle is properly secured in support brackets.
5. Make sure Kettle motor is fully plugged into the outlet located on the bottom
side of the kettle. NOTE: Kettle will not heat if plug is not fully inserted.
6. Turn appliance ON by ipping the switch on the top of the machine (see illustration above
for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.
7. Turn unit OFF.
8. Use the Oil Measuring Spoon (H2) supplied with your OLD FASHIONED MOVIE TIME
POPCORN CART with CONCESSION STAND to add 1 tablespoon of your favorite popcorn
cooking oil to the Kettle. For best popping results, it is suggested to use vegetable oil.
9. Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup (H1).
NOTE: If you are using pre-measured packages of corn kernels or popcorn
making kits, you must still measure out the corn kernels and oil using the
supplied Kernel Measuring Cup (H1) and Oil Measuring Spoon (H2). Always
follow this rule: 1 Tbsp. oil + 2-oz. popcorn = 8 cups popcorn.
10. Turn the unit ON and close the door. In no time at all, you will hear the popping begin. Fresh,
hot popcorn will begin to burst out of the ip lids on the Kettle - just like at the theater!
11. Use your Popcorn Scoop (J) to scoop and serve.
ENGLISH
10
HELPFUL TIPS
NEVER leave the unit unattended while operating.
SMOKING
If your OLD FASHIONED MOVIE TIME POPCORN CART with CONCESSION STAND
ENGLISH
begins to smoke during cooking, it may be due to grease build up. In order to
reduce smoking, make sure that you clean the inside of the Kettle between uses.
POPCORN
For best results, use an all natural soft-shelled popping corn. Organic popping corn is
not recommended for use in your OLD FASHIONED MOVIE TIME POPCORN CART with
CONCESSION STAND as it has a harder husk and will result in more unpopped kernels.
CLEANING & MAINTENANCE
1. Make sure appliance is unplugged and COMPLETELY COOLED before cleaning. Unplug
the outer plug to the outlet as well as the Kettle motor plug inside the Main Unit (A).
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside
and outside of Main Unit (A), then wipe with a non-abrasive towel to dry.
3. Unplug Kettle motor and remove Kettle from support brackets.
4. Take Kettle out of the Main Unit (A). After removing Kettle from
Main Unit (A), ll 2/3 of Kettle with hot, soapy water.
5. Let the Kettle sit for 15 – 20 minutes to cut the grease. (Time may vary – use
your own judgment depending on the amount of cleaning necessary.)
6. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
7. Rinse inside carefully and dry.
8. Wipe outside of Kettle with damp cloth and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
11
RECIPES
The OLD FASHIONED MOVIE TIME POPCORN CART with CONCESSION STAND makes hot,
fresh, theater style popcorn every time – anytime!
Enjoy your freshly popped corn in a variety of ways:
• Regular theater style popcorn – add butter and salt.
• Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.
• Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.
• Try some of these fun recipes!
NOTE: 1 Gallon = 16 Cups
PARMESAN POPCORN
• 1 Gallon Popped Corn
• 1 Tsp. Garlic Powder
• 3 Green Onions,
finely chopped
• ½ Tsp. Cracked
Pepper
• 1 Tsp. Sea Salt
• 1 Cup Parmesan
Cheese, grated (more
or less to taste)
• 3 Tbsp. Olive
Oil, heated
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with CONCESSION
STAND as directed on page 10.
Combine garlic powder, green onions, cracked
pepper, sea salt and parmesan cheese. Set aside.
In a large mixing bowl, drizzle heated
olive oil over popcorn.
Toss until well coated.
Slowly add in dry ingredients while continuously
stirring popcorn until well coated.
You may also shake the dry ingredients over
popcorn in a large paper or muslin bag.
ENGLISH
TRADITIONAL POPCORN BALLS
• ½ Cup Unpopped
Corn Kernels
• ½ Cup Corn Syrup
• ½ Cup Granulated
Sugar
• ½ Tsp. Salt
• 1 Stick of Butter,
softened
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with CONCESSION
STAND as directed on page 10.
Mix corn syrup, sugar and salt together in pot and
dissolve over medium heat for about 3 minutes.
Add popcorn to pot, stirring and tossing consistently
until popcorn is evenly coated at low heat.
Remove from heat.
Use softened butter to form balls while
popcorn mixture is still warm.
Wrap individual balls in plastic wrap, tie
and store at room temperature.
12
CHUNKY MONKEY
• 1 Gallon Popped Corn
• 1 (12-oz.) Bag
Semi-Sweet
Chocolate Chips
• 1 (12-oz.) Bag Peanut
ENGLISH
Butter Morsels
• 1 (4.2-oz.) Bag
Banana Chips, broken
into small pieces
• 1 (11-oz.) Bag Peanuts
POPCORN PEPPERMINT BARK
• 1 Gallon Popped Corn
• 1 (12-oz.) Bag
Semi-Sweet or Dark
Chocolate Chips
• 1¼ cup Peppermint
Sticks, crushed
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with CONCESSION
STAND as directed on page 10.
Melt chocolate chips and peanut butter morsels
over stove, as packaging recommends.
Line cookie sheet with wax paper.
Toss together popcorn and banana chips.
Spread popcorn and banana chip mixture
evenly over cookie sheet.
Drizzle melted chocolate and peanut butter
mixture over popcorn and banana chips.
Sprinkle peanuts over chocolate and peanut butter mixture.
Allow to cool.
When chocolate and peanut butter has hardened,
break up the Chunky Monkey into pieces.
Can be stored in plastic freezer bags.
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with CONCESSION
STAND as directed on page 10.
Melt chocolate chips over stove, as packaging recommends.
Line cookie sheet with wax paper.
Spread popcorn evenly over cookie sheet.
Drizzle melted chocolate over popcorn.
Sprinkle crushed peppermints over chocolate.
Allow to cool.
When chocolate has hardened, break up
Popcorn Peppermint Bark into pieces.
Can be stored in plastic freezer bags.
13
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT
OF THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
OLD FASHIONED MOVIE TIME POPCORN CART with CONCESSION STAND / CCP310B
Should you have any questions, please contact us via email or at the
customer service number listed below between the hours of 8:00 AM
and 5:00 PM, Monday through Friday, Central Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: (920) 347-9122
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and
ll out the Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
This appliance is designed and built to provide many years of satisfactory performance
under normal household use. The distributor pledges to the original owner that
should there be any defects in material or workmanship during the rst 90 days of
purchase, we will repair or replace the unit at our option. Our pledge does not apply
to damages caused by shipping, mishandling or unit being dropped. A product
deemed defective either from manufacturing or being mishandled is up to the
distributor’s discretion. In order to obtain service under this warranty, please contact
Nostalgia Products Group, LLC at the telephone number listed above or by lling
out the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions,
damages caused by improper replacement parts, abuse or misuse will void this
pledge to you and is being made in place of all other expressed warranties.
For more information, visit us online at www.nostalgiaelectrics.com.
Like us on Facebook at www.facebook.com/NostalgiaElectrics.
ENGLISH
14
Loading...