Nostalgia VINTAGE COLLECTION SPC700SS Installation Manual
All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2015 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 11/24/15)
SPC700SS
Vintage Collection™ 6.0 oz. Stainless Steel Popcorn Cart
Chariot à Maïs Éclaté d’Acier Inoxydable
Acero Inoxidable Carrito para palomitas de maíz
Instructions and Recipes
Instructions et Recettes
Instrucciones y Recetas
ENGLISH
2
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SAFETY
Appliance Specications:
120 Volts, 60 Hz
600 Watts, ETL Approved
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
ENGLISH
3
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge nor cloth.
4. NEVER use a scouring pad on the appliance.
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity
of the appliance to ensure their safety.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not
touch Kettle while operating; it gets very HOT.
3. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
4. Close supervision is necessary when any appliance is used near children.
5. Unplug from outlet when not in use, before removing parts and before cleaning.
6. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
7. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
8. DO NOT use outdoors.
9. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
10. DO NOT leave Kettle motor running once popping has ceased.
11. Extreme caution must be used when moving this appliance.
ENGLISH
4
12. DO NOT use the appliance for other than its intended use.
13. An appliance that is plugged into an outlet should not be left unattended.
14. Check Kettle for presence of foreign objects prior to use.
15. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
16. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
17. Longer detachable power supply cords can be used if care is exercised in their use.
18. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
19. This appliance has a three-prong plug. To reduce the risk of electrical shock, this
plug is intended to t into an outlet only one way. If plug does not t, contact
a qualied electrician. Do not attempt to modify the plug in any way.
20. CAUTION: The light bulb inside of this unit will get hot. This bulb is
only for use with the popcorn cart. If the bulb gets damaged, it must
be replaced by a qualied person in order to avoid a hazard.
21. Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualied service personnel.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the VINTAGE COLLECTION™ 6.0 OZ. STAINLESS STEEL POPCORN
CART! This 53” tall vendor-style popcorn cart will be the hit of every party, popping up to
24 cups of hot, fresh, kettle cooked popcorn per batch. Providing a vintage look and feel
reminiscent of silent movie houses and carnivals circa-early 1900s, the STAINLESS STEEL
POPCORN CART is designed for both home and commercial use and features a large,
stainless steel kettle with a built-in stirring system and kernel catcher to keep unpopped
kernels out of each perfect batch. There is a compartment in the base of the unit to store
supplies, making it easy to keep the cart well stocked and organized. The STAINLESS STEEL
POPCORN CART has an easy-to-clean design and its accessible height makes serving a snap!
ENGLISH
5
PARTS & ASSEMBLY
Please ensure that you have removed all of the hardware and parts listed before
discarding packaging. In our eorts to reduce packaging, we maximize the packing
material to protect your new purchase. As a result, small parts may not be readily visible.
Hardware
#1 Screw (8mm) #2 Screw (8mm) #3 Bolt (25mm) #4 Bolt (60mm)
Qty. 4 Qty. 6 Qty. 4 Qty. 4
#5 Flat Washer #6 Flat Washer #7 Nut Cap
Qty. 2 Qty. 4 Qty. 6
ENGLISH
6
Parts
(A) Main Unit (B) 4 oz. Kernel (C) Storage (D) Oil Measuring
Measuring Cup Compartment Spoon (1 tbsp.)
(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrenches
(I) Base Support (J) Bottom Plate (K) Cross Bar (L) Leg Assembly
(M) Popcorn scoop (N) Screwdriver (O) Tray handle (P) Screw
ENGLISH
7
Assembly of Base Support
1.
1. Attach Push Handle (E) from inside Storage Compartment (C) using supplied #1 Screws.
2. Insert Cross Bar (K) into the square inserts on the inside of Base Support
(I) and secure from below with two #2 Screws. Insert the Leg Assembly
(L) over the protruding ends of the Base Support (I) and fasten from the
inside of Base Support (I) using four #4 Bolts,and four #7 Nut Caps.
3. Secure Bottom Plate (J) to Base Support (I) using four #2 Screws.
4. Assemble Base Support (I) into the bottom of the Storage
Compartment (C) and secure with four #3 Bolts.
ENGLISH
8
Assembly of Wheels
1. Slide one #5 Flat Washer onto Axle Bolt (F) and insert Axle Bolt (F) into Wheel (G).
2. Put on one #6 Flat Washer. Insert Axle Bolt (F) with Wheel (G) into Base Support (I).
3. Add a second #6 Flat Washer and #7 Nut Cap. Use Wrench (H) to tighten the #7 Nut Cap.
4. Repeat steps to attach second Wheel (G) onto the other side of the Base Support (I).
(#7)
Nut
Cap
(#5)
Flat
Washer
(F)
Axle
Bolt
(G)
Wheel
(I)
Base
Support
(#6)
Flat
Washers
ENGLISH
9
Assembly of Main Unit
ON / OFF & Light
Switches
Crank Handle
Stainless Steel Kettle
Locking Main Unit to Storage Compartment
Place the Main Unit (A) onto the Storage Compartment (B) so that the two side
holes match up. Lock by tightening the Lock Screws as shown below:
Attaching the Tray Handle
Using included screwdriver (N) attach tray handle (O) to
outside of tray with the included screw (P).
ENGLISH
10
HOW TO OPERATE
Before rst use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
1. First, nd a at surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
3. Make sure Kettle is properly secured in support brackets.
4. Make sure Kettle motor is plugged in.
5. Plug in the appliance while switch is ipped to OFF position.
6. Turn appliance ON by ipping the switch on the top of the machine (see illustration above
for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.
7. Once Kettle has heated, turn unit OFF before adding ingredients.
8. Use the Oil Measuring Spoon supplied with your STAINLESS STEEL POPCORN
CART to add 2 tablespoons of your favorite popcorn cooking oil to the
Kettle. For every Measuring Cup full of kernels (4 oz.), add 2 tablespoons
of oil. For best results, light vegetable oil is recommended.
9. Add 4 ounces of popcorn kernels to the Kettle using supplied Kernel Measuring Cup.
10. Close the door and turn unit ON. In no time at all, you will hear the popping begin. Fresh,
hot popcorn will begin to burst out of the ip lids on the Kettle - just like at the theater!
ENGLISH
11
HELPFUL TIPS
SMOKING
If your STAINLESS STEEL POPCORN CART begins to smoke during
cooking, it may be due to grease build up. In order to reduce smoking,
make sure that you clean the inside of the Kettle between uses.
CLEANING & MAINTENANCE
EASY CLEAN KETTLE
Wing nut
Kettle
Lid
1. Make sure appliance is unplugged before cleaning. Unplug the outer plug
to the outlet as well as the Kettle motor plug inside the Main Unit.
2. Unplug Kettle motor and remove Kettle from support brackets.
3. Take Kettle out of the Main Unit and remove Wing Nuts by twisting
counter-clockwise. Lift dual-hinged lid from Kettle.
4. Fill ²⁄ ³ of Kettle with hot, soapy water and let sit for 15 – 20 minutes to cut the grease. (Time
may vary – use your own judgment depending on the amount of cleaning necessary.)
5. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
6. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside and
outside of Main Unit and dual-hinged lid, then wipe with a non-abrasive towel to dry.
7. Carefully rinse all parts and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
ENGLISH
12
RECIPES
The STAINLESS STEEL POPCORN CART makes hot, fresh, theater style
popcorn anytime! Enjoy your freshly popped corn in a variety of ways:
• Regular theater style popcorn – add butter and salt.
• Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.
• Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.
• Try some of these fun recipes
1 Gallon = 16 cups
PARMESAN POPCORN
• 1 Gallon of
Popped Corn
• 1 Tsp Garlic Powder
• 3 Green Onions,
finely chopped
• ½ Tsp Cracked Pepper
• 1 Tsp Sea Salt
• 1 Cup Parmesan
Cheese, grated (more
or less to taste)
• 3 Tbsps Olive
Oil, heated
Pop corn kernels using the STAINLESS STEEL
POPCORN CART as directed on page 9.
Combine garlic powder, green onions, cracked
pepper, sea salt and parmesan cheese. Set aside.
In a large mixing bowl, drizzle hot olive oil over popcorn.
Toss until well coated.
Slowly add in dry ingredients while continuously
stirring popcorn until well coated.
You may also shake the dry ingredients over
popcorn in a large paper or muslin bag.
TRADITIONAL POPCORN BALLS
• ½ Cup Popcorn
• ½ Cup Corn Syrup
• ½ Cup Granulated
Sugar
• ½ Teaspoon Salt
• 1 Stick of Butter,
softened
Pop corn kernels using the STAINLESS STEEL
POPCORN CART as directed on page 9.
Mix corn syrup, sugar and salt together in pot and
dissolve over medium heat for about 3 minutes.
Add popcorn to pot, stirring and tossing consistently
until popcorn is evenly coated at low heat.
Remove from heat.
Use softened butter to form balls while
popcorn mixture is still warm.
Wrap individual balls in plastic wrap, tie
and store at room temperature.
Loading...