Nostalgia KPM200CART Instructions And Recipes Manual
All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2016 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 01/13/16 SN)
KPM200CART
Vintage Collection™ 2.5 Oz. Popcorn Cart
Carrito de palomitas de maíz
Chariot à maïs soué
Instructions and Recipes
Instrucciones y recetas
Consignes et recettes
ENGLISH
2
Make every day a party!
Visit www.nostalgiaproducts.com for more fun products.
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SAFETY
Appliance Specications:
120 Volts, 60 Hz
300 Watts, ETL Approved
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
ENGLISH
3
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge or cloth on the appliance.
4. NEVER use a scouring pad on the appliance.
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity of the
appliance to ensure that they do not play with it.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not touch Kettle while
operating; it gets very HOT.
3. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
4. Close supervision is necessary when any appliance is used near children.
5. Unplug from outlet when not in use, before removing parts and before cleaning.
6. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
7. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
8. DO NOT use outdoors.
9. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
10. DO NOT leave Kettle motor running once popping has ceased.
11. Extreme caution must be used when moving this appliance.
ENGLISH
4
12. DO NOT use the appliance for other than its intended use.
13. An appliance that is plugged into an outlet should not be left unattended while in operation.
14. Check Kettle for presence of foreign objects prior to use.
15. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
16. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
17. Longer detachable power supply cords can be used if care is exercised in their use.
18. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
19. This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to t into a polarized outlet only one way.
If the plug does not t fully into the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the VINTAGE COLLECTION™ 2.5 OZ. POPCORN CART by
Nostalgia™. This 45" tall vendor-style popcorn cart will be the hit of every party.
Enjoy up to ten cups of hot, fresh, kettle cooked popcorn per batch. It features a
large, stainless steel kettle with a built-in stirring system. There is a compartment
in the base of the unit to store supplies, making it easy to keep the cart well
stocked and organized. The POPCORN CART has an easy-to-clean design, and its
accessible height makes serving a snap with old-fashioned style to spare.
ENGLISH
5
PARTS & ASSEMBLY
Hardware
#1 Bolt (55mm)
Qty. 4
#2 Bolt (65mm)
Qty. 2
#3 Screw (10mm)
Qty. 2
#4 Screw (8mm)
Qty. 22
#5 Flat Washer
(8mm)
Qty. 2
#6 Flat Washer
(6mm)
Qty. 2
#7 Locking Washer (6mm)
Qty. 2
#11 Locking Washer (3mm)
Qty. 2
ENGLISH
6
Parts
(G) Storage
Compartment
(E) Wheel (2)
(F) Door
(H1) Kernel Measuring
Cup (2-oz.)
(O) Back Cross Bar
(P) Screw Driver
(K1) Wrench
(K2) Wrench
(I) Support Bar (4)
(H2) Oil Measuring
Spoon (1 Tbsp.)
(J) Screw Driver
(A) Main Unit
(B) Top Cover (C) Push Handle
(D) Bottom Plate
(L) Legs
(N) Right Bar
(M) Left Bar
ENGLISH
7
Use provided tools for assembly: Wrench (K1), Wrench (K2), and Screw Driver (J).
1. Use 12 #4 Screws to assemble Top Cover (B), Bottom Plate (D) and Storage
Compartment (G) together. Make sure that the "X" on the Bottom Plate
is facing DOWN and the at edge of the Top Cover faces forward.
2. Attach Push Handle (C) and Storage Compartment (G) using two #3 Screws,
two #11 Locking Washers and two #9 Nuts. Use Screws to attach Push Handle
to exterior of Storage Compartment. Use Locking Washers and Nuts on
interior of Storage Compartment to secure Push Handle.
3. Lift the upper piece of the Top Cover to t the Door (F) into place. Use six #4
Screws to attach the Door (F) to the main compartment assembly in Step 2.
Assembly
ENGLISH
8
5. Use one #4 Screw to attach a Support Bar (I) to one of the wheel assemblies.
Repeat process using the second wheel assembly and second Support Bar (I).
4. Connect one Wheel (E) and the Left Bar (M) with a #2 Bolt, a #5
Flat Washer, a #6 Flat Washer, a #7 Locking Washer, and a #10 Nut
Cap. Repeat process with second wheel and Right Bar (N).
6. Use the Back Cross Bar (O) to connect the wheel and support bar assemblies.
ENGLISH
9
Assembly of Base Support & Wheels (continued)
7. Use two #1 Bolts and two #8 Nut Caps to connect the Legs (L) to the wheel structure.
8. Use two #1 Bolts and two #8 Nut Caps to attach
both Support Bars (I) to Step 7 assembly.
9. Use two #4 Screws to attach the Support Bar (I) to the wheel structure.
ENGLISH
10
Stainless Steel Kettle
ON / OFF / LIGHT Switch
Crank Handle
10. Attach the assembled Storage Compartment (G) parts to the wheels/legs
assembly. Push Storage Compartment (G) down until it is t into place.
• Place Main Unit (A) onto the top of the Storage Compartment (B).
• Ensure that the two inserting pins underneath the Main Unit (A) line up correctly so that
Main Unit (A) can be locked under the beam of the Storage Compartment (C) (see gure 1).
• Place the kettle into the support brackets and connect the power cord at the
base. Insert the crank handle and turn counter-clockwise to attach.
gure 1
Assembly of Main Unit
ENGLISH
11
HOW TO OPERATE
Before rst use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
1. First, nd a at surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for holding
the popcorn, cooking oil, Kernel Measuring Cup (H1) and Oil Measuring Spoon (H2).
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit.)
3. Plug in the appliance while switch is ipped to OFF position.
4. Make sure Kettle is properly secured in support brackets.
5. Make sure Kettle motor is fully plugged into the outlet located on the bottom
side of the kettle. NOTE: Kettle will not heat if plug is not fully inserted.
6. Turn appliance ON by ipping the switch on the top of the machine (see illustration above
for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.
7. Turn unit OFF.
8. Use the Oil Measuring Spoon (H2) supplied to add 1 tablespoon of your favorite popcorn
cooking oil to the Kettle. For best popping results, it is suggested to use vegetable oil.
9. Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup (H1).
NOTE: If you are using pre-measured packages of corn kernels or popcorn making
kits, you must still measure out the corn kernels and oil using the supplied Kernel
Measuring Cup (H1) and Oil Measuring Spoon (H2). Always follow this rule: 1 Tbsp. oil
+ 2-oz. popcorn = 8 cups popcorn. (DO NOT exceed 2.5 oz. of popcorn kernels.)
10. Turn the unit ON and close the door. In no time at all, you will hear the popping begin. Fresh,
hot popcorn will begin to burst out of the ip lids on the Kettle - just like at the theater!
11. Use your Popcorn Scoop to scoop and serve.
ENGLISH
12
HELPFUL TIPS
NEVER leave the unit unattended while operating.
SMOKING
If your POPCORN CART begins to smoke during cooking, it may be due to grease build up.
In order to reduce smoking, make sure that you clean the inside of the Kettle between uses.
POPCORN
For best results, use an all natural soft-shelled popping corn. Some brands of
kernels have a harder outer shell and may result in fewer popped kernels.
CLEANING & MAINTENANCE
1. Make sure appliance is unplugged and COMPLETELY COOLED before cleaning. Unplug
the outer plug to the outlet as well as the Kettle motor plug inside the Main Unit (A).
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside
and outside of Main Unit (A), then wipe with a non-abrasive towel to dry.
3. Unplug Kettle motor and remove Kettle from support brackets.
4. Take Kettle out of the Main Unit (A). After removing Kettle from
Main Unit (A), ll 2/3 of Kettle with hot, soapy water.
5. Let the Kettle sit for 15 – 20 minutes to cut the grease. (Time may vary – use
your own judgment depending on the amount of cleaning necessary.)
6. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
7. Rinse inside carefully and dry.
8. Wipe outside of Kettle with damp cloth and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
Loading...