NoShok 613 Specifications

Level

613

Cage-Protected Submersible Level Transmitters

613 SERIES

• Designed for severe high solids environments such as sewage, lift stations, storm canals, wet
wells and slurry tanks where sludge, slurry or turbulence may be present

• Ideal for a wide variety of industrial and municipal liquid level measurement applications
requiring watertight protection

• Welded at cap and base to provide a leak-tight seal

• Highly accurate, shock resistant and extremely stable over long periods of time

• Standard 1/2″ NPT conduit for attaching lifting rings or mounting brackets

• Advanced diffused semi-conductor and sputtered thin fi lm sensor for maximum stability

• Ranges from 0 inH

• Corrosion resistant 316L stainless steel construction

• Reverse polarity protection and short circuit protection are standard

• Optional 5 to 30 Vdc input for 0.5 to 2.5 Vdc output, for fi eld applications

• Optional integrated temperature measurement (PT100 RTD)

O to 50 inH2O through 0 psi to 300 psi (higher ranges available on request)

2

FEATURES

■ Advanced diffused semi-

conductor and sputtered
thin film sensor for
maximum stability

■ High accuracy and long

term stability

■ Ranges from 0 inH

50 inH2O through
0 psi to 300 psi

■ Corrosion resistant

stainless steel construction

■ Optional 5 -30 Vdc input

for 0.5 to 2.5 Vdc output,
for field applications

■ Optional integrated

temperature measurement
(PT100 RTD)

2

O to

APPLICATIONS

■ Sewage

■ Lift stations

■ Storm canals

■ Wet wells

■ Slurry tanks

SPECIFICATI ONS

Output signals 4 mA to 20 mA, 2-wire; 0 Vdc to 5 Vdc and 0 Vdc to 10 Vdc, 3-wire;

Pressure ranges 0 in H
Proof pressure 2 times range
Burst pressure 4 times range
Accuracy ± 0.25% full scale (BFSL); optional ± 0.125% full scale (BFSL);

Repeatability ≤ ± 0.05% full scale
Electrical connection
Hysteresis ≤ ± 0.1% full scale
Stability ≤ ± 0.2% full scale for 1 year, non-accumulating
Load limitations ≤ (VPower-10)/0.020 Amp for 4 mA to 20 mA

Wetted materials Housing: 316 stainless steel

Power supply* 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire)

Temperature ranges Compensated 32 °F to 122 °F (0 °C to 50 °C)

Temperature measurement
Response time ≤ 1 ms (between 10% and 90% full scale)
Environmental protection NEMA 6P, IP68
Electromagnetic rating 2004/108/EEC, EN 61326 Emission (Group 1, Class B) and Immunity

Electrical protection Reverse polarity protection, short circuit and optional lightning protection

Shock
Vibration
Weight Approximately 3.2 lb. - cable extra

0.5 Vdc to 2.5 Vdc, 3-wire
O to 50 in H2O through 0 psig to 300 psig

2

(includes the effects of non-linearity, hysteresis, non-repeatability, zero point
and full scale errors)

Submersible 1/2

≥ 10,000 Ω for 0 Vdc to 10 Vdc, 3-wire
≥ 5,000 Ω for 0 Vdc to 5 Vdc, 3-wire

Cage seal: All 316 stainless steel
Cable: Polyurethane, FEP available on special versions

10 Vdc to 30 Vdc (0 Vdc to 5 Vdc, 3-wire)
5 Vdc to 30 Vdc (0.5 Vdc to 2.5 Vdc, 3-wire)
14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-wire)

Effect ± 0.01%/ °F for zero and span
Storage -22 °F to 175 °F (-30 °C to 80 °C)
Medium 14 °F to 122 °F (-10 °C to 50 °C)

Optional PT100, 4-wire per IEC 60751

(industrial locations)

per EN 6100- 4- 5; 1.5J
Less than ± 0.05% full scale effect for 100 g’s @ 20 ms on any axis

Less than ± 0.01% full scale effect for 15 g’s @ 0 Hz to 2,000 Hz on any axis

″ NPT conduit

12

* Unregulated power supplies

61 3

SERIES

ORDERING INFORMATION

SERIES 613
PRESSURE

RANGES

ACCURACIES 1 ±0.25% full scale (BFSL) 2 ±0.125% full scale (BFSL)
OUTPUT SIGNALS 1 4 mA to 20 mA, 2-wire 5 0 Vdc to 10 Vdc, 3-wire

ELECTRICAL
CONNECTIONS

OPTIONS CC Cable Clamp FE Filter Element LP

1

Only available with PUR cable

5 0 psi to 5 psi (11.55 ft/H
10 0 psi to 10 psi (23.10 ft/H
15 0 psi to 15 psi (34.65 ft/H

2 0 Vdc to 5 Vdc, 3-wire 11 0.5 Vdc to 2.5 Vdc, 3-wire

-XX Standard Polyurethane (PUR) cable -38-XX FEP cable
NOTE: XX=length of cable in feet.

DC Desiccant Cartridge JB Cable Junction Box (NEMA 4X) LR Lifting Ring

O) 20 0 psi to 20 psi (46.20 ft/H2O) 75 0 psi to 75 psi (173.25 ft/H2O) 300 0 psi to 300 psi (693 ft/H

2

O) 30 0 psi to 30 psi (69.30 ft/H2O) 100 0 psi to 100 psi (231.00 ft/H

2

O) 50 0 psi to 50 psi (115.50 ft/H2O) 150 0 psi to 150 psi (346.50 ft/H

2

Lightning Protection

1

Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

613 – 5 – 1 – 1 – 50' – LP EXAMPLE

Series ...........................................................613

Pressure range ......................... 0 psig to 5 psig

Accuracy ...............................................±0.25%

Output signal ................4 mA to 20 mA, 2-wire

Electrical connection ........ Subm ersible cable

Option .................................Lightning Protec tion

ORDERING INFORMATION
DIMENSIONS

WIRING DIAGRAMS
ELECTRICAL CONNECTIONS

O)

2

O)

2

PT1

PT100 RTD

O)

2

1

Outline Dimensions

1/2″ NPT

Ø 1.06″

(27 mm)

1.25″

1.75″

(44 mm)

(32 mm)

1.06″

(27 mm)

.25″

(6 mm)

2.14″

(54 mm)

Active area

Ø 3.75″

(95 mm)

4.44″

(113 mm)

Optional Cable Clamp

Optional Desiccant Cartridge

Optional Cable Junction Box

Optional Filter Element

Optional Lifting Ring

13