Page 1
USER MANUAL
USER MANUAL
PRESSURE
Digital
Pressure Gauges
SERIES
HIGH PERFORMANCE DIGITAL PRESSURE GAUGES
1000
Page 2
1. Description of Parameters
1. Description of Parameters
Series 1000 Display Screen
Max. value
Min. value
Main display
LO-BAT
Bar graph display
Full scale
Unit
Series 1000 Optional Display Screen
Max. value
Min. value
Main display
LO-BAT
Special function
1
Bar graph display
2nd display
Full scale
Unit
Tare
Page 3
Function in normal mode
Function in normal mode
Key Function/Action
- switches the device on
- switches the device off
+
+
Min/Max Memory
The min/max memory is updated with the current measured value in
every measuring cycle.
The min. value is displayed by pressing the min. key.
The max. value is displayed by pressing the max. key.
Pressing and holding the appropriate key (min. or max.) and quickly
pressing the menu key at the same time resets the device to the
current measured value.
Bar Graph with Trailing Pointer Function
The integrated bar graph display with trailing pointer function additionally indicated on the display shows the trend in current working
pressureregardless of the digital display. With the help ofthe trailing
pointer function, the max. storedvalue isalso indicated in the bar graph
display in addition to the digital display in the form of a bar segment.
This bar segment is also updated to the current measured value when
the min./max. value is reset.
- changes to programming mode if pressed
for longer than 3 secs
- Display indicated max. value as long as
key is pressed
- Display indicates min. value as long as
key is pressed
- Resets max. value to
“ 0 “
- Resets min. value to
“ 0 “
2
Page 4
2. Programming Series 1000
2. Programming Series 1000
Standard Programming
Standard Programming
3
Page 5
Optional Programming
Optional Programming
4
Page 6
Optional Tare FunctionOptional Tare Function
Optional Tare Function
In this mode the positive deviation of the measured value from the
tared value (max. 20% of the measuring range) is constantly indicated by the main display. The untared pressure value is always shown
on the bar graph display. Thus the Digital Gauge’s actual working
load can be read off even if the tare function is active. When the
tare function is active,afunction indicator appears on the display.
There are two:
1) Select the tare function and set the value to be tared using
the keys . When set, the measured value to be tared is
backed up as tare. The main display and the auxiliary display then
show the value “0000” in the pressurized state. Example: If a
value to be tared is set as 2 bar, the main display indicates 0 bar
in the pressurized state.
2) Load the Digital Gauge with the pressure to be tared.
The current measured value appears in the main display
of the main display. Select the tare function and then
operate both keys simultaneously . The current measured
value will be backed up as tare. The main display and the auxiliary
display are set to (0000).
Setting the tare value to (0000) resets the tare function in both
models.
5
Page 7
3. Technical Data
3. Technical Data
Series 1000 With 4 digit, 7 segment
Display
• Accuracy
• Update rate
Measuring ranges
to EN
Type of pressure
Overload limit
Materials
Wetted
Pressure connector ¼ NPT, other connectors on request
Stability per year ≤ ± 0.2 % o.F.S. under reference conditions
Memory MIN/MAX (not volatile even when changing batteries)
Programming
mode Parameters
• Password
• Tare
• Automatic
switch off time
• Measuring unit
Illumination of
display
Voltage supply
• Operating life
1)
Measuring deviation to IEC 61 298-2, including non-linearity, hysteresis,
deviation of zero point and upper range value
Optional: with 4.5 digit, 7/14 segment, second display
11 mm high, bar graph display
11mm high, bar graph display
0.5 % o.F.S. ± 1 digit
0.25% Full Scale (BFSL)
5 /sec
5/sec
0 psig to 72 psig through 0 psig to 10,000 psig, others on request.
0 psig to 30 psig through 0 psig to 10,000 psig,
0...2 bar to 0...700 bar, others on request
Compound ranges from -30inHg to 72 psig through
others on request
-30inHg to 145 psig.
1)
1)
; ±0.5% Terminal Point ± 1 digit
Twofold, max 15,000 psig
Twofold, max 15,000 psig
Stainless steel
Optional: settable
Optional: ≤ 20% o.F.S. settable
Option 2…90 min. factory set
Optional: settable
bar, PSI MPa selectable
Optional
2 x 1.5V cell AA
4000h (AA 2000 mAh)
6
Page 8
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Housing Stainless steel, Optional black protective cap
Weight Approx. 0.4 kg
2)
Conformity declaration on request
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Housing Stainless steel, Optional black protective cap
Weight Approx. 0.4 kg
2)
Conformity declaration on request
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
0° F to 140° F (0…60° C)
-4° F to 158° F (-20…70° C)
-22° F to 185° F (-22° F to 212° F for measuring range
≥ 1500 psig); (-30…85° C, -30…100° C for measuring range
≥ 100 bar)
14° F to 140° F (-10…60° C)
Approx. 0.88 lbs.
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Temperature
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
Housing
Weight Approx. 0.4 kg
2)
Conformity declaration on request
4. CE – Conformity
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Housing Stainless steel, Optional black protective cap
Weight Approx. 0.4 kg
2)
Conformity declaration on request
4. CE – Conformity
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Housing Stainless steel, Optional black protective cap
Weight Approx. 0.4 kg
2)
Conformity declaration on request
4. CE – Conformity
effective protection from electromagnetic interference.
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
0° F to 140° F (0…60° C)
-4° F to 158° F (-20…70° C)
-22° F to 185° F (-22° F to 212° F for measuring range
≥ 1500 psig); (-30…85° C, -30…100° C for measuring range
≥ 100 bar)
14° F to 140° F (-10…60° C)
Approx. 0.88 lbs.
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
± 0,15 % /10 K
± 0,15 % /10 K
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 605 29/IEC 5 29
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 613 26
Noise immunity
2)
acc. to EN 613 26
Temperature
ranges
• Storage
• Mat. measured
• Environment
-2 0 .... 70 °C
-30 .... 85 °C (-30 … 100°C for measuring range
100 bar)
-10 .... 60 °C
Temperature
comp. range
0.... 60°C
Temperature
effect
• Zero point
• Measuring range
Degree of pro-
tection
• permissible rel.
humidity
IP 65 to EN 60529
< 90%, non-condensing
Emitted inter-
ference
2)
acc. to EN 61326
Noise immunity
2)
acc. to EN 61326
Temperature
ranges
• Storage
• Mat. measured
0° F to 140° F (0…60° C)
Approx. 0.88 lbs.
32° F to 140° F (0 . . . 60° C)
Approx. 0.88 lbs.
-4° F to 158° F (-20 . . . 70° C)
-22° F to 185° F (-22° F to 212° F for measuring range)
≥ 1500 psig); (-30 . . . 85° C, -30 . . . 100° C for measuring range
≥ 100 bar)
14° F to 140° F (-10 . . . 60° C)
≤ ± 0.15%/10 K
≤ ± 0.15%/10 K
Stainless steel, Optional black protective cap
comp. range
Temperature
effect
• Zero point
• Measuring range
Degree of protection
• permissible rel.
humidity
Emitted inter-
2)
ference
Noise immunity
Temperature
ranges
• Storage
• Mat. measured
• Environment
• Environment
Housing
Weight Approx. 0.4 kg
2)
Conformity declaration on request
4. CE – Conformity
The Digital Gauge complies with all requirements of EN 61326 with
regard to interference emission and immunity for use in industrial
areas. NOSHOK recommends the use of shielded cables. Installation and
cable routing must be carried out correctly in order to maintain the
0.... 60°C
32° F to 140° F (0 . . . 60° C)
0° F to 140° F (0…60° C)
≤ ± 0.15%/10 K
≤ ± 0.15%/10 K
IP 65 to EN 60529
< 90%, non-condensing
acc. to EN 61326
2)
acc. to EN 61326
-4° F to 158° F (-20 . . . 70° C)
-22° F to 185° F (-22° F to 212° F for measuring range)
≥ 1500 psig); (-30 . . . 85° C, -30 . . . 100° C for measuring range
≥ 100 bar)
14° F to 140° F (-10 . . . 60° C)
Stainless steel, Optional black protective cap
Approx. 0.88 lbs.
Approx. 0.88 lbs.
7
Page 9
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
Notes:
8
Page 10
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
9
Page 11
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
________________________________________________________
_
10
Page 12
CORPORATE HEADQUARTERS
1010 WestBagley Road • Berea,Ohio 44017 •440-243-0888 • FAX 440-243-3472
E-MAIL: [email protected]• WEB: www.noshok.com.
DGI 07-4
Loading...