Page 1
/
:
j
.
20% to 3@%
SA VINGS
rical
The new CTU’s production,
Grinders
f
m
w
T
V
Finger-Tip
Manual Work Rotation
Selector
Either-End
trol
Silky-Sure Hand Table
Traverse
Floor-Space-Saver Ribbon
Type Base Way Guards
Close-Approach Rear Base
Design
Automatic
Table Dwell Con
design
features
in substantial
or
and maintenance
are
”pay>n9“0ff”
savings
W
Quick-Clean Coolant Ramp
Swing-Back Wheel Guard
Cover
Stand-Up Electrical Controls
Mounting
Knee-High Hydraulic and
Lubricating Pump Mounting
{NORTON*
GRINDERS
Page 2
I
—
The
• •
Feed Rate Controls are all conveniently set
from front of machine.
NORTON
i ,
o
CTU is a Real
Why
Because it’s a
of an
many
design features.
And these advantages of the new CTU are being proved in plant
after plant. For example:
A Prominent Producer of Electric Motors says
“An
grinders."
Is
operating and maintenance conveniences, so many exclusive
average saving of 31% with CTU s over previous cylindrical
the Type CTU such a test-cutter?
completely new grinder—not a modernized version
old machine. In no other cylindrical grinder will you find so
Cost-Cuffer
. .
. . Definitely Proved
'
••
in
Plant after
Plant!
Pre-set Truing and Grinding Speeds. Proper
speeds set from first piece on job. Lever
movement brings one or the other thereafter
—
no search or try.
Automatic Wheel Feed at table reversals
with automatic
re-set
after grinding to size.
©2
©
Table Dwell Controls, both right hand and
left hand
located hand-high directly in front of
operating position.
, are adjustable separately and
Z/A
—
A Transmission Manufacturer reports
“
Savings of 20 to 25% with the new Norton CTU."
An Automobile Maker comments
“In
addition to substantial savings on an axle shaft grinding opera
tion, our Grinding Foreman says, This is the best grinder that has ever
been produced. It runs day and night and never a sign of trouble.
—
—
i ii
NORTON 10 x 36" TYPE CTU
SEMIAUTOMATIC CYLINDRICAL GRINDER
Maintenance Conveniences
Feather-touch Work Jogging Lever enables
work to be jogged at any time whether '
work rotation is being automatically or
manually
governed.
These features of the new CTUs and many
more are illustrated and described in detail
THE NORTON WHEEL SPINDLE UNIT—over 50% of
spindle body supported in two super-duty size, hard
bronze bearings. Spindle stays on its fixed center
line—no shifting possible. Flood lubrication is auto
mafic, filtered, self-contained within wheel slide.
THE NORTON MICROMETRIC REVOLVING
FEED SCREW MECHANISM provides com-
plete metal-to-metal contact during grinding
feed portion of cycle—a feature that
insures prolonged accuracy.
W
nopton
F
Can You Afford to Continue with Any Other Grinder than the CTU
in four new catalogs. No. 157-2 covers the
6
” plain. No. 1488-1 the 6
No. 166-2 the 10*' plain and No. 1787-1 the
10
” semiautomatic.
no obligation.
” semiautomatic.
Write for any or all
—
?
Page 3
Four
Other
Mew
WOKTON
۩ST-CU?TSRS
.
1
The No. 20 Cutter and Tool Grinder
The highly versatile, tilting wheel head machine
for general tool room service. Catalog No.
189-2 for details.
The 10 x 20" Universal Grinder
The wide range universal machine with a
1" clear-through hole in head-stock spindle.
Catalog No. 170-2 for details.
The 8" Hydraulic Surface Grinder
At home in tool room or production line.
Continuous hydraulic cross feed a real feature
for truing. Catalog No. 190-2 for details.
GRINDERS
NORTON
J. F. OWENS MACHINERY COMPANY
1810 Erie Boulevard East
The Type 16 FC Lapping Machine
The vertical lapping machine that produces
optically flat surfaces and thickness tolera
/n millionths. Catalog No. 212-2 for details.
nces
LAPPERS
Syracuse 1, New York
Loading...