Norton 66252832390 User Manual
SAFETY DATA SHEET
SECTION 1 : IDENTIFICATION
Product identifier used on the label:
Product Name: Thin Wheel - Depressed Center
Product Code: Thin Wheels
UPC Number: 66252832390
Other means of identification:
Recommended use of the chemical and restrictions on use:
Product Use/Restriction: Abrasive Product.
Chemical manufacturer address and telephone number:
Manufacturer Name: Saint-Gobain Abrasives, Inc.
Address: 1 New Bond Street
Worcester, MA 01615
Website: www.Nortonabrasives.com
General Phone Number: 508-795-5000
Emergency phone number:
Emergency Phone Number: 508-795-5000
SECTION 2 : HAZARD(S) IDENTIFICATION
Classification of the chemical in accordance with CFR 1910.1200(d)(f):
Signal Word: Not applicable.
GHS Class: Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Hazard Statements: Not applicable.
Precautionary Statements: Not applicable.
Hazards not otherwise classified that have been identified during the classification process:
Route of Exposure: Eyes. Skin. Inhalation. Ingestion.
Eye: Causes eye irritation.
Skin: Causes skin irritation.
Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation.
Ingestion: May be harmful if swallowed. May cause vomiting.
Chronic Health Effects: Prolonged or repeated contact may cause skin irritation.
Signs/Symptoms: Overexposure may cause headaches and dizziness.
Target Organs: Eyes. Skin. Respiratory system. Digestive system.
Thin Wheel - Depressed Center
66252832390
Revison Date: 03/31/2015
1 of 8
Aggravation of Pre-Existing
Conditions:
None generally recognized.
Fiberglass
Inhalation: Fiberglass contained in wheels have fiber diameters greater than 10 um, therefore considered
non-respirable.
SECTION 3 : COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures:
Chemical Name CAS# Ingredient Percent
EC Num.
Inorganic fluorides Not Applicable
1 - 5 by weight
Sulfates/Sulfides No Data
5 - 10 by weight
Resin 9003-35-4
10 - 30 by weight
Fiberglass 65997-17-3
1 - 5 by weight 266-046-0
Silicon carbide 409-21-2
5 - 10 by weight 206-991-8
Aluminum Oxide, Non-fibrous 1344-28-1
60 - 100 by weight 215-691-6
Titanium dioxide 13463-67-7
1 - 5 by weight 236-675-5
SECTION 4 : FIRST AID MEASURES
Description of necessary measures:
Eye Contact: Immediately flush eyes with plenty of water for at least 15 to 20 minutes. Ensure adequate flushing of the
eyes by separating the eyelids with fingers. Remove contacts if present and easy to do. Continue rinsing.
Get medical attention, if irritation or symptoms of overexposure persists.
Skin Contact: Immediately wash skin with soap and plenty of water.
Get medical attention if irritation develops or persists.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
Ingestion: If swallowed, do NOT induce vomiting. Call a physician or poison control center immediately. Never give
anything by mouth to an unconscious person.
Most important symptoms/effects, acute and delayed:
Other First Aid: Not applicable.
Indication of immediate medical attention and special treatment needed:
Note to Physicians: Not applicable.
SECTION 5 : FIRE FIGHTING MEASURES
Thin Wheel - Depressed Center
66252832390
Revison Date: 03/31/2015
2 of 8
Suitable and unsuitable extinguishing media:
Suitable Extinguishing Media: Use alcohol resistant foam, carbon dioxide, dry chemical, or water fog or spray when fighting fires
involving this material.
Unsuitable extinguishing media: Not applicable.
Specific hazards arising from the chemical:
Hazardous Combustion
Byproducts:
Not applicable.
Unusual Fire Hazards: Not applicable.
Special protective equipment and precautions for fire-fighters:
Protective Equipment: As in any fire, wear Self-Contained Breathing Apparatus (SCBA), MSHA/NIOSH (approved or equivalent)
and full protective gear.
Fire Fighting Instructions: Not applicable.
NFPA Ratings:
NFPA Health: 1
NFPA Flammability: 1
NFPA Reactivity: 0
SECTION 6 : ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures:
Personal Precautions: Evacuate area and keep unnecessary and unprotected personnel from entering the spill area. Use proper
personal protective equipment as listed in Section 8.
Environmental precautions:
Environmental Precautions: Avoid runoff into storm sewers, ditches, and waterways.
Methods and materials for containment and cleaning up:
Spill Cleanup Measures: Not applicable.
Methods and materials for containment and cleaning up:
Methods for containment: Contain spills with an inert absorbent material such as soil or sand. Prevent from spreading by covering,
diking or other means. Provide ventilation.
Methods for cleanup: Clean up spills immediately observing precautions in the protective equipment section. Place into a
suitable container for disposal. Provide ventilation. After removal, flush spill area with soap and water to
remove trace residue.
Reference to other sections:
Other Precautions: Not applicable.
SECTION 7 : HANDLING and STORAGE
Precautions for safe handling:
Handling: Use with adequate ventilation. Avoid breathing vapor and contact with eyes, skin and clothing.
Hygiene Practices: Wash thoroughly after handling. Avoid contact with eyes and skin. Avoid inhaling vapor or mist.
Conditions for safe storage, including any incompatibilities:
1
1 0
Thin Wheel - Depressed Center
66252832390
Revison Date: 03/31/2015
3 of 8
Loading...