User Manual: VisionShare Series
VisionShare Series
Wireless Collaboration System
User Manual
A20 / A30 / A40 / A45
2018 © NorthVision Technology Inc. All Rights Reserved.
www.northvision.com
Ver. 1.0
User Manual: VisionShare Series
Contents
DISCLAIMERS ....................................................................... 1
WARRANTY .......................................................................... 2
SAFETY NOTIFICATIONS ........................................................ 4
FEATURES ............................................................................ 7
WHAT IS IN THE PACKAGE .................................................... 8
A. PRODUCT DESCRIPTION ................................................. 9
1. Transmitter -------------------------------------------------------------- 9
2. Receiver----------------------------------------------------------------- 10
3. Power Station --------------------------------------------------------- 11
4. USB Wireless Touch Dongle (A30 / A45 ONLY) --------------- 12
5. Universal Power Adapter Set ------------------------------------- 13
B. ESTABLISH YOUR COLLABORATION SYSTEM ................. 14
1. Connect the Receiver ----------------------------------------------- 14
2. Connect the Transmitter ------------------------------------------- 15
2.1 Display Port Adapter ............................................................. 16
2.2 Auxiliary Power Input ............................................................ 16
3. Establish the Connection ------------------------------------------- 17
4. Start Your Presentation --------------------------------------------- 18
4.1 Start the Presentation ........................................................... 18
4.2 Pause the Presentation ......................................................... 19
4.3 Standby Mode ....................................................................... 20
4.4 Switching Your Presentation Sources .................................... 21
5. Wireless Touch (A30 / A45 ONLY) -------------------------------- 22
5.1 Connect the Receiver ............................................................ 23
5.2 Connect and Initiate the Wireless Touch Dongle .................. 24
User Manual: VisionShare Series
C. APPENDIX .................................................................... 26
1. Charge Your Transmitter ------------------------------------------- 26
2. Receiver Installation------------------------------------------------- 27
2.1 Wall Mount installation ......................................................... 27
2.2 Secondary HDMI Output ....................................................... 28
3. Configure Your Collaboration System --------------------------- 29
3.1 Device Name (Device ID) ....................................................... 30
3.2 Clock Setting .......................................................................... 31
3.3 Background ........................................................................... 32
3.4 Power Setting ........................................................................ 33
3.5 Connection ............................................................................ 34
3.6 System ................................................................................... 35
4. Mirroring360 & 4 Split Screens ----------------------------------- 41
5. Indicator Lights Description --------------------------------------- 43
6. Specification ----------------------------------------------------------- 47
User Manual: VisionShare Series
Disclaimers
NorthVision Corporation makes no representations or warranties,
either expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability or fitness for
any particular purpose.
Further, NorthVision Corporation reserves the right to revise this
publication and to make changes from time to time in the contents
hereof without obligation of NorthVision Corporation to notify any
person of such revision or changes.
This user manual aims to provide the most updated and accurate
information to customers, and thus all contents may be modified from
time to time without prior notice. Please visit www.northvision.com
for the latest version of this manual.
The illustrations, contents and the images in this guide are for your
reference only and subject to change without prior notice.
1
User Manual: VisionShare Series
Warranty
NorthVision warrants the equipment it manufactures to be free from
defects in material and workmanship. The procedures presented in
this document apply to all NorthVision’s VisionShare Series products.
All NorthVision brand products purchased by Distributor will receive
a three (3) years parts and labor warranty, except for VisionShare
transmitters, and all accessories, which hold a one (1) year parts and
labor warranty.
The warranties stated above shall be effective upon delivery and
remain in effect in accordance with NorthVision's then-current policy.
Warranty does not include: (i)Products have been improperly
installed, altered or otherwise modified. (ii)Products have been
subjected to misuse, abuse, negligence, accident or natural disasters.
(iii)Products have been used in a manner contrary to specification.
DOA (Dead on Arrival): The DOA period is 60 days after shipment to
an end user. Products that cannot be turned on or cannot display and
after testing will be considered DOA. After the DOA product has been
tested, please return to the distributor with an RMA number and a
replacement will be sent. Products returned that are functioning
properly, will be returned to the end user, and the cost of returning
the product with normal functions will be borne by the customer.
Products returned by DOA should be kept in their original packaging
and the accessories must be complete. Otherwise, the products will
be considered as RMA (Return as received).
RMA (Returned Material Authorization): Products that fail more than
60 days from the date of shipment but within the warranty period
three (3) years require an RMA. During the warranty period, RMA
parts and labor costs are included. The customer is responsible for the
return of RMA products to the distributor/ NorthVision. Distributor
will be responsible for both the shipping method and shipping costs
2
User Manual: VisionShare Series
of RMA products (in the warranty period) for the return. Product
determined to be improperly used or damaged by the customer, will
incur a maintenance and parts fee. Shipping costs for returning outof-warranty products is at the customer’s expense.
The information in this manual has been carefully checked and is
believed to be accurate. However, NorthVision assumes no
responsibility for any inaccuracies that may be contained in this
manual. In no event will NorthVision be liable for direct, indirect,
special, incidental, or consequential damages resulting from any
defect or omission in this manual, even if advised of the possibility of
such damages. The technical information contained herein regarding
the features and specifications are subject to change without notice.
3
User Manual: VisionShare Series
Safety Notifications
Read the instruction manual carefully before use and save it.
Use only parts or accessories, (especially power adapters),
recommended by the manufacturer. Unapproved parts may be
hazardous and cause injures to the product or users, and will
void the warranty.
WARNING:
IF ANY FUNCTIONAL PROBLEMS OR DEFECTS OCCUR WHICH ARE
ATTRIBUTABLE TO
IMPROPER USE OF THE PRODUCT SHALL
VOID THE WARRANTY.
Refer servicing to qualified personnel only.
Do not attempt to repair or dissemble the product on your own.
Opening or removing cover can expose you to dangerous voltage
or other hazards.
Before plugging the power cord into the AC inlet of the power
supply unit, make sure that the voltage applied to the power
outlet is within the specified range (100V~240V).
Improper power source voltage range will cause damage to the
power supply unit or connected products.
Power off the product and remove the power adapter while
cleaning the product.
Before powering on the product, make sure all the connectors,
cables are firmly installed.
Don't immerse the battery in water and seawater. Please put it
in cool and dry environment if no using.
4
User Manual: VisionShare Series
Do not use or leave the battery at very high temperature
conditions (for example, strong direct sunlight or a vehicle in
extremely hot conditions). Otherwise, it can overheat or fire or
its performance will be degenerated and its service life will be
decreased. It is recommended that you use the battery within
the ambient temperatures range of 15-30 degrees.
First Time Battery Charge:
Charge the transmitters for six hours before first-time use.
5
User Manual: VisionShare Series
Important Safety Notifications
Do not expose the product to liquids or moisture, such as a
bathtub, a washbowl, a kitchen sink, a laundry tub, and a
swimming pool.
Do not expose the product, including the devices and
accessories, under direct sunlight, and keep it away from any
heat source.
Do not bend the cables of the devices, or place them to the
unstable locations.
Always install and operate the devices in flat and secure
location.
Do not place the product on an unstable location, stand or table.
If the machine falls, it may injure a person or cause serious
damage to the appliance.
Do not allow anything to rest on the power cord.
Do not locate the product where people may walk on the cord.
Do not make the power outlet and extension cords overload.
Overload can result in fire or electric shock.
If any of the following situations occurs, unplug the product
from the power outlet immediately and consult with a qualified
service person:
1. The power cord or plug is damaged or frayed.
2. Liquid is spilled on the product.
3. The product is dropped or damaged.
Use a soft cloth to clean the product when it is dirty. In case of
stubborn dirt, use a mild detergent and wipe the product gently.
Always turn off and unplug the product before cleaning.
Please clean and store the products and accessories with care,
when the product is not use.
6
User Manual: VisionShare Series
HDMI Plug & PLAY
Near Zero Latency
No WiFi Interference
Compatible with all HDMI
connectivity. Intuitive
True Plug & Play
Cable-like experience by
instant transmission
< 0.1 ms
Free from 2.4GHz and
5GHz WiFi signal
interference.
4K Video Quality
Easy Installation
Power Embedded
High performance of 4K
video quality without
compression loss.
Simple HDMI
connectivity. Intuitive set
up without software
installation.
Solves power and
cabling issues.
Features
Wireless Collaboration Solution
Perfect Combination with Touch Display
For Conference Room
7
User Manual: VisionShare Series
Power Station
Transmitter
X 2
Receiver
Mini DP to HDMI
Adapter
HDMI Cable
Micro USB Cable
Universal Power Adapter
Set x 2
Quick Installation
Guide
USB Wireless Touch
Dongle*
Touch USB Cable*
(Type A to Type B)
What is in the package
* USB Wireless Touch Dongle and Touch USB Cable (Type A to Type B) are
included in A30 and A45 ONLY
8
User Manual: VisionShare Series
Play / Pause
Button
Battery
Indicators
Status
Indicator
HDMI
Connector
HDMI
Connector
Auxiliary
Power Input
(Micro USB)
A. Product Description
1. Transmitter
First Time Battery Charge:
Charge the transmitters for six (6) hours before first-time use.
Auxiliary Power Input:
Use the supplied Micro USB cable to obtain power from laptop or PC.
Please refer to Auxiliary Power Input.
9
User Manual: VisionShare Series
Touch Pairing
Keyboard / Mouse
Reset
LAN
USB / Touch
DC IN (5V / 4A)
HDMI OUT 2
AUDIO OUT
HDMI OUT 1
Power Button
Status Indicator
Power Button
2. Receiver
10
User Manual: VisionShare Series
Transmitter
Recharge
Slot
Transmitter
Recharge
Slot
DC IN
Micro USB Cable
Slot
USB Wireless Touch Dongle
Slot
Status Indicator
3. Power Station
11
User Manual: VisionShare Series
USB
Control Button
Status Indicator
4. USB Wireless Touch Dongle (A30 / A45 ONLY)
12
User Manual: VisionShare Series
US Plug Adapter
EU Plug Adapter
Power Adapter
Snap-In Latch
Click!!
5. Universal Power Adapter Set
Change the Plug Adapter
To install the plug adapter:
To detach the plug adapter:
Note:
1. Make sure the plug adapter is firmly installed before plugging
2. Store the unused plug adaptor securely for future use.
the power adapter to the power outlet.
13
User Manual: VisionShare Series
Receiver
Power Outlet
AUDIO
HDMI
DC IN
Power Adapter
HDMI
HDMI Cable
Audio Cable
(Optional)
Touch USB Cable
(A30/A45 only)
B. Establish Your Collaboration System
1. Connect the Receiver
1. Connect the power adapter to the power outlet and Receiver.
2. Connect the cable of HDMI to the Receiver and display device.
Display Device
14
User Manual: VisionShare Series
Transmitter
HDMI
Static
Flash
2. Connect the Transmitter
1. Connect the Transmitter to the laptop or PC.
2. The Transmitter flashes RED and then turns BLUE to search for
the Receiver.
LED Indicator
15
User Manual: VisionShare Series
HDMI
Micro USB
Transmitter
miniDP to HDMI
Adapter
Display
Port
Transmitter
USB
2.1 Display Port Adapter
You can use the HDMI to Display Port (DP) adapter and connect to
the display port. Other adapters and dongles may be used but
NorthVision is unable to guarantee their performance.
2.2 Auxiliary Power Input
You can use the supplied micro USB cable to obtain power for
presentation and battery-charging.
16
User Manual: VisionShare Series
Flash
Flash
Static BLUE
LED Indicator
Transmitter
Receiver
Power Button
3. Establish the Connection
1. Press the power button on the Receiver.
2. The Receiver flashes RED and flash BLUE to sync to the
Transmitter.
LED Indicator
3. Once the pairing of Transmitter and Receiver is established, the
indicators of the Transmitter and Receiver show static BLUE
light and are ready for presentation.
17
User Manual: VisionShare Series
Press (PLAY)
Display Device
Transmitter
Laptop or PC
Receiver
Static GREEN
4. Start Your Presentation
4.1 Start the Presentation
Press the PLAY button of the transmitter to start the presentation.
The status LED indicator of Receiver and Transmitter show static
GREEN while the presentation is in progress.
18
User Manual: VisionShare Series
Press (PAUSE)
Display Device
Transmitter
Laptop or PC
Receiver
LED Indicator
BLUE
4.2 Pause the Presentation
Press the PLAY/PAUSE button of the Transmitter to pause the
presentation.
The LED indicator turns to BLUE as the presentation is paused.
19
User Manual: VisionShare Series
Power Button
(Flashing)
Power Button
(Press and Wake-Up)
4.3 Standby Mode
The receiver may switch to standby mode automatically.
(Please refer to Power Setting at setting page for further
instruction).
Receiver
Press the power button to wake up the receiver.
20
User Manual: VisionShare Series
Laptop 1
Transmitter 1
Laptop 2
Transmitter 2
Press
Press
Receiver
Display Device
4.4 Switching Your Presentation Sources
Press the PLAY button of Transmitter 1 or Transmitter 2 to switch the
presentation sources (laptop 1 or laptop 2). Handshaking takes a few
seconds, and then the displayed image will switch.
Swap
21
User Manual: VisionShare Series
Touch Display
Transmitter
Laptop
USB Wireless
Touch Dongle
Receiver
5. Wireless Touch (A30 / A45 ONLY)
VisionShare with touch display allows bi-directional wireless touch
functions, with full control back to the PC/laptop simultaneously.
* Wireless Touch function may have compatibility issue cause by different panel
touch drive. Please contact your local agency or service@NorthVision.com
22
User Manual: VisionShare Series
Receiver
Power Outlet
AUDIO
HDMI
USB Touch
DC IN
Power Adapter
HDMI
USB Touch
Touch USB Cable
(A30/A45 only)
Audio Cable
(Optional)
5.1 Connect the Receiver
1. Make sure the Transmitter and Receiver are connected and the
collaboration system is established.
2. Make sure the touch USB cable is connected to the touch
display properly.
Touch Display
23
User Manual: VisionShare Series
Transmitter
USB Wireless Touch
Dongle
Press
5.2 Connect and Initiate the Wireless Touch Dongle
1. Connector the USB wireless touch dongle to the USB port of
the laptop or PC.
2. Press the control button on the touch dongle to activate the
wireless touch function.
The screen of the laptop is synchronized with touch display.
24
User Manual: VisionShare Series
Touch Display
Touch
Laptop / PC
Pop-Up!
3. VisionShare touch provides bi-directional control back to the
PC or laptop. Using the touch display you may open files,
writing, resize the image, etc. from your PC or laptop.
25
User Manual: VisionShare Series
DC IN
Power
Adapter
Power
Outlet
C. Appendix
1. Charge Your Transmitter
1. Place the power station on the designated location
(e.g. conference table).
2. Connect the power adapter set to the charging dock and power
outlet.
3. Place the transmitters in the slots of power station.
A flashing light indicates that the transmitters are charging.
4. When the battery is fully charged, remove the transmitter (s)
from the power station.
Install the Transmitter to the Power Station
Important: First Time Battery Charge
Charge the transmitters for six hours before first-time use.
26
User Manual: VisionShare Series
Receiver
Power Outlet
Display Device
2. Receiver Installation
2.1 Wall Mount installation
You can install the receiver onto a wall or ceiling.
To install the Receiver on the wall:
1. Use two wall-plugs and screws and install to the location.
2. There are two hook slots in the bottom of receiver.
Mount the receiver on the wall and make sure it is secured.
3. Connect the power adapter set to the receiver and power
outlet.
4. Do not place the receiver in a closed cabinet.
Note:
Install the receiver to a flat and stable location.
Select the proper plug adapter and install to the
power adapter.
27
User Manual: VisionShare Series
Receiver
Power Outlet
DC IN
Power Adapter
HDMI 2 HDMI 1
HDMI Cable
Secondary Display
Device (Projector)
Display Device
Wall Mount Opening of Receiver
(Bottom)
2.2 Secondary HDMI Output
28
User Manual: VisionShare Series
3. Configure Your Collaboration System
Click the setting icon (red marker) to configure the VisionShare
system settings such as Device Name (Device ID), Clock Setting,
Background, Power Setting, Connection and System:
29
User Manual: VisionShare Series
3.1 Device Name (Device ID)
Each device is assigned an exclusive ID (name) for management.
=> Type the name of the device.
=> Click “SAVE” to confirm.
30
User Manual: VisionShare Series
3.2 Clock Setting
Setting the local time manually for the device.
=> Click ”+”, “-“ and “AM/PM” to set the proper local time.
=> Click “SAVE” to confirm.
31
User Manual: VisionShare Series
3.3 Background
Click on the red marker to import and select the background image
via USB drive for your device.
=> Select the image.
=> Click “SAVE” to confirm.
32
User Manual: VisionShare Series
3.4 Power Setting
Setting a timer to standby mode if the device is not functioning during
the designate time.
=> Click “On” to activate the standby mode.
=> Select the timer (countdown time).
=> Click “SAVE” to confirm.
33
User Manual: VisionShare Series
3.5 Connection
IP address will show on the screen automatically after plug in LAN
cable.
=> Or, please click “Ethernet” button to set “DHCP” or “Static IP”
manually.
=> Or, please click “Others” to set to other settings.
34
User Manual: VisionShare Series
3.6 System
To configure the basic function on the device, include “Resolution”;
“Language”; “Factory Reset” and “Advance” function.
35
User Manual: VisionShare Series
Resolution
Resolution: adjust the aspect ratio screen scale, display interface,
HDMI resolution and video screen size. Various resolutions can be
selected.
36
User Manual: VisionShare Series
Language
Language: language setting of the device.
37
User Manual: VisionShare Series
Factory Reset
Factory Reset: restore the device to the default settings
38
User Manual: VisionShare Series
Advance
Advance: click “Upgrade” to upgrade the system.
Click “Others” can see the “FileExplorer” and “Apps” on the device.
39
User Manual: VisionShare Series
40
User Manual: VisionShare Series
4. Mirroring360 & 4 Split Screens
You can use the Receiver of the VisionShare System to mirror your
device(s) to the TV.
1. Turn on the power switch of the TV.
2. Turn on the receiver of the VisionShare collaboration system.
3. Operate your device and activate the mirroring function.
4. Find the “mirror display device” and follow the instructions to
connect.
41
User Manual: VisionShare Series
Mirroring360
https://www.northvision.com/download
5. Multiple Split-Screen:
The VisionShare system can supply multiple device connection
for up to 4 devices.
For Android:
Make sure you have installed the Mirroring360 on your Android
device. You can download it from the Play Store.
42
User Manual: VisionShare Series
Status
LED Indicator
Description
OFF
The Transmitter is not
connected.
Auto-Pairing
Flashing RED
The Transmitter is connected
and then auto-pairing to the
Receiver.
Auto-Pairing
Success
&
Stand By
Static BLUE
The connection between
Transmitter and the Receiver is
established.
The Transmitter is ready for
presentation.
Press the PLAY/PAUSE button to
start presentation.
Presentation
Static GREEN
Presentation is proceeding.
Press the PLAY/PAUSE button to
pause presentation.
Pause
Static BLUE
Presentation is paused. No
content sent to the display
device.
Press the PLAY/PAUSE button
again to resume presentation.
ERROR
Flashing RED
The Transmitter is in error or is
not functioning properly.
5. Indicator Lights Description
Transmitter
43
User Manual: VisionShare Series
Battery Status Indicators
Description
The four LED indicators indicate the battery
capacity of the Transmitter:
Four LED: fully charged (100%).
Three LED: the battery capacity is l about
75%.
Two LED: the battery capacity is about 50%.
One LED (LOW BATTERY):
the battery capacity is about 25 % and needs
charging immediately.
Battery
Status
Indicators
Transmitter - Battery Status Indicator
TIP: Check the Battery Capacity
When the transmitter is not connected, press the PLAY/PAUSE button
to check the battery capacity.
When the transmitter or the micro USB connecter for battery-charge
is connected, the battery indicators light automatically to indicate the
battery status.
Important: First Time Battery Charge
Charge the transmitters for six hours before first-time use.
44
User Manual: VisionShare Series
Status
LED Indicator
Description
OFF
The Receiver is power-off.
Auto-Pairing
Flashing RED
The Receiver is pairing with the
Receiver.
Auto-Pairing
Success
&
Stand By
Static BLUE
The connection between
Transmitter and the Receiver is
established.
Presentation
Static GREEN
Presentation is proceeding.
Pause
Static BLUE
Presentation is paused.
ERROR
Flashing RED
The Receiver is in error or is not
functioning properly.
Power Button
(Indicator)
Status
Description
Power-OFF
The Receiver is power-off.
Static White
The Receiver is powered on.
Flashing White
The Receiver is in standby mode.
Press the power button to wake
up the receiver.
Receiver
Receiver - Power Button (with White LED Indicator)
45
User Manual: VisionShare Series
Status
LED Indicator
Description
OFF
The Power Station is off.
Standby
Static BLUE
The Power Station is connected
and ready for battery charge.
Battery Charge
flashing BLUE
The Power Station is in battery
charge process.
Battery Charge
Full
Flashing GREEN
The Transmitter is fully charged.
ERROR
Flashing RED
The Power Station is in error or
is not functioning properly.
Status
LED Indicator
Description
Power-OFF
The USB Wireless Touch Dongle
is not connected to the
computer.
Pairing
Flashing BLUE
The USB Wireless Touch Dongle
is paring with the receiver.
Pairing
Success
Static BLUE
The USB Wireless Touch Dongle
has established the connection
to the receiver.
Play
Static GREEN
The USB Wireless Touch Dongle
is functioning properly.
Error
Flashing GREEN
and BLUE
The USB Wireless Touch Dongle
is in error and not functioning.
Power Station
USB Wireless Touch Dongle
46
User Manual: VisionShare Series
Model Name
A20
A30
A40
A45
Input Resolution
up to 1920 x 1080 @ 60Hz
up to 4K x 2K (3840 x 2160 @ 30Hz)
Video Quality
Uncompressed content
Frame Rate
up to 1920 x 1080 60 fps
up to 3840 x 2160 30 fps
Support Platform
Windows, Mac, Chrome, Any OS
support HDMI standard 1.4
Windows, Mac, Chrome, Any OS support
HDMI standard 2.0
Data Rate Wireless
up to 28Gbps
Wireless Distance
up to 10m / 33 feet*
Video Output
HDMI 1.4 x 2
HDMI 2.0 x 2
Transmitter Battery
up to 3.5 Hours
Transmitter
Connector
HDMI Input x 1, Micro USB x 1, Button x 1 (Play/Stop)
Receiver Connector
HDMI Output x 2
LAN x 1,
3.5 mm Audio x 1
USB Type A x 1
USB Wireless Touch
N/A
X 1
N/A
X 1
Mirroring360
4-Split Screen, Air-Play, Mirroring for Android,
Support MAC/Windows/iOS/Android/Chrome,
Max. Output Resolution 1920 x 1080 (Compressed Video)
Customized
Start-up Screen
Yes
Dual Display Output
Yes
Extended Desktop
Yes
Power Supply
AC 100~240V, 5V/4A
Package
Micro USB Cable x 1
HDMI Cable x 1
miniDP to HDMI
Adapter x 1
Micro USB Cable x 1
HDMI Cable x 1
miniDP to HDMI
Adapter x 1
Touch USB Cable x 1
USB Wireless Touch
Dongle x 1
Micro USB Cable x 1
HDMI Cable x 1
miniDP to HDMI
Adapter x 1
Micro USB Cable x 1
HDMI Cable x 1
miniDP to HDMI
Adapter x 1
Touch USB Cable x 1
USB Wireless Touch
Dongle x 1
Power Adapter (5V/4A), Universal Plug of Power Adapter (with US, EU), QSG
6. Specification
* Wireless transmission distance will depend on different environments.
* Specifications subject to change without further notification.
47
Loading...