Northstar Trailers SPORTSTAR I User Manual
NORTHSTAR TRAILERS
Assembly Guide for SPORTSTAR I Trailer
Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow
the instructions and steps in this manual for proper assembly. We would suggest
you watch our assembly instructions on youtube before you begin.
TRAILER PARTS LIST
Part
No.
Part Description
Qty.
1
Frame (deck)
1
2
Tongue (with wiring harness)
and Coupler (hitch)
1
3
Side-Rail
2
4
Front-Rail
1 5 Rear Corner Bracket
2 6 Side-Rail Supports
6 7 Wheel and Hub Assembly
2
8
Leaf Spring
2
9
Axle 1 10
Fender
2
11
Front Rail Support (angled)
3
12
Wiring Harness
1
13
Rear Gate
1
Part
No.
Description
Qty.
A
U-Bolt
4
B
Spring Plates
2 C Small Locknut
21
D
3 ½” threaded Pin-Bolt
4
E
3 5/8” threaded Pin-Bolts
2
F
Rear Gate-Pin
2
G
Large Nut
6 H Small Lock-Washer
21
I
Small Flat-Washer
34
J
Small Bolt 1”
34
K
Cotter-Pin
8
L
Spare Tire Lug Nuts
2 M Taillight/Brake Light
2 N Running Light
2
O
Taillight/Brake Light L-Bracket
2
P
License Plate Bracket
1
Q
Small Brass Screw (included in
bag with blue wire connectors)
4
R
Wire Connector
8
HARDWARE
Make sure that all parts, as listed above, are included in your shipment. If any parts
are missing please contact NORTHSTAR at 1-855-375-3088.
Other tools needed for assembly: grease gun, flathead screwdriver, socket set,
wrench set, small zip-ties, small rubber mallet.
This trailer requires inverted assembly. (Assembled upside-down). Start by turning
the trailer frame upside-down so the trailer deck is facing the ground. Use a table
robust enough to support the weight of the trailer frame and high enough to elevate
the frame to waist-height, or place the corners of the frame on buckets, or use
sawhorses to elevate each end.
CAUTION: This trailer is heavy. More than one person is required to flip the trailer
frame and assembly this trailer. Personal injury may occur if you try to assemble this
trailer alone.
Loading...