North Kite Trust BAR 11 User Manual

BAR 11

north kiteboarding bar 11 manual

TIPS & TRICKS

WAT CH OU T F OR US EFU L T IPS & TRI CK S R EGA RD I NG O U R PR O DU CT S UN D ER WWW. NO R T HKI TE S .C OM IN THE F O LL OWI N G CA T EG OR Y : TV, P IC S & G OOD IE S › › M OV IE S.

TIPS & TRICKS

north kiteboarding bar 11 manual

ENG L IS H

CONTENT

1. RELEASE OF LIABILITY 3

2. SAFETY AND PRECAUTIONS 4

2.1. KITEBOARDING SAFETY 4

2.2. DAN GER S F ROM THE KITE 4

2.3. DAN GER S F ROM KI TE LIN ES 5

2.4. DAN GER S F ROM THE KITEBOARD 5

2.5. DAN GER S TO UNINVOLVED THIRD PARTIES 5

2.6. WEAHTER RELATED DANG ERS 6

3. SYSTEM 7

3.1. TR UST BAR 7

3.2. IR ON HEA RT III 10

4. FUNCTIONS 11

4.1. SAFETY LEASH 11

4.2. SAFETY MODES 13

4.3. REASSEMBLING THE IR ON HEA R T I II AF TER RE LEA SE 17

4.4. ROTO HE AD 18

4.5. FLIP FLOP CHICKEN DICK 1 9

4.6. VARI O C LEAT 19

4.7. FREE SLIDING STO PPE R AND STOPP ER BALL 22

4.8. ONE 4 A LL 23

4.9. MICRO LO OP AN D M ICR O HOOK 23

4.10. KOOK PR OOF LI NE ATTACHMENT 25

5. REPLACING PARTS 26

5.1. REPLAC ING THE RUBBER LINE 26

5.2. FITTING THE MICR O L OOP (M ICR O LOOP UPGRADE KIT) 26

5.3. FITTING THE MICR O H OOK (M ICR O LOOP UPGRADE KIT) / 27

REPLAC ING THE DEPOWER LINE 27

5.4. REPLAC ING THE CHICKEN LOOP / CHICKEN DICK 28

6. TIPS AND TRICKS 29

6.1. TRIM CHECK 29

7. MAINTENANCE AND CARE 31

8. WARRANTY POLICY 33

north kiteboarding bar 11 manual

1. RELEASE OF LIABILITY

RE L EA SE O F LI A BI LIT Y, CL A IM WAIV ER , AS S UM PT I ON O F RI SK

By assembling and/or using this North Kite product, you agree that you have read and understood the entire North Kiteboarding product owner’s manual, including all instructions and warnings contained in that manual, prior to using the North Kiteboarding product in any way. You additionally agree that you will ensure any additional or subsequent user of your North Kiteboarding product will read and understand the entire North Kiteboarding product Owner’s Manual, including all instructions and warnings contained in that manual, prior to allowing that person to use your North Kiteboarding product.

AS S UM PTI ON O F RI SK:

Use of the North Kiteboarding Product and any of its components involve certain inherent risks, dangers, and hazards that can result in serious personal injury and death to both the user and to nonuser third parties. In using the North Kiteboarding Product, you freely agree to assume and accept any and all known and unknown risks of injury to you and to third parties while using this equipment. The risks inherent in this sport can be greatly reduced by abiding by the warning guidelines listed in this owner manual and by using common sense.

RE L EA SE AN D WA I VE R OF C LA I MS

In consideration of the sale of the North Kiteboarding product to you, you hereby agree to the fullest extent permitted by law, as follows:

To waive any and all claims, that you have or may in the future have against Boards & More and all related parties resulting from use of the North Kiteboarding Product and any of its components

To release Boards & More and all related parties from any and all liability for any loss, damage, injury or expense that you or any users of your North Kiteboarding product may suffer, or that your next of kin may suffer, as a result of the use of the North Kiteboarding product, due to any cause whatsoever, including negligence or breach of contract on the part of Boards & More and all related parties in the design or manufacture of the North Kiteboarding product and any of its components. In the event of your death or incapacity, all provisions contained herein shall be effective and binding upon your heirs, next of kin, executors,administrators, assigns, and representatives. Boards & More-related partieshave not made and expressly deny any oral or written representations other than what is set forth herein and the North Kite product User’s Manual.

north kiteboarding bar 11 manual

ENG L IS H

2. SAFETY AND PRECAUTIONS

North Kiteboarding strongly recommends:

We recommend a third-party insurance for kitesurfers. In some countries, such insurances are mandatory for kitesurfers.

If you are not yet able to kite or if you feel insecure, you must attend a licensed Kiteboarding school to learn the basics of this fantastic sport. Get familiar with the safety precautions, which are indispensable for safe Kiteboarding.

Kiteboarding creates a heavy strain on your body. You should only go Kiteboarding if you are in good physical condition and suffer from no medical conditions that may prevent you from kiting. Always act carefully to not endanger yourself or anyone else. Do not endanger the safety of uninvolved third parties! Be aware of the risks you take and limit them to a minimum level!

Before going on the water make sure you are familiar with your North Kiteboarding equipment. For your own safety, read the following instructions as well as product descriptions very carefully.

2. 1 . KI T EB OA R DI NG S AFE TY

›› Fly your Kite only over unobstructed water. Never on land! ›› Fly this kite only if you are a strong swimmer and are wearing a Coast Guard approved

PFD. ›› Only use bars with a safety system that you can open in emergency situations. ›› Use a quick-release kite leash so that you can unhook your body from the gear in case

of an unforeseeable emergency. ›› Avoid power lines, telephone poles, airports, streets, buildings and trees. ›› If you use a board that is leashed to your body, wear a helmet! ›› Take into account the usual risks associated with water sports such as rocks, waves, sun-

burn, hypothermia, jellyfish etc.

north kiteboarding bar 11 manual

2. SAFETY AND PRECAUTIONS

2. 2 . DA NG E RS F RO M THE K IT E

When Kiteboarding you might face the extreme forces of the elements.

In rare cases the kite or its lines can cause dangerous situations: ›› You can hurt yourself through uncontrolled water take-offs caused

by gusty conditions, and the danger of collision with obstacles. ›› The incorrect usage of lines creates a high risk of injury for yourself as well as others. ›› People who get caught by the lines can suffer injuries or burns. ›› Uninvolved third parties can get injured through crashing kites. ›› Fly your kite only over unobstructed water. ›› When kiting, do not fly over people or pets. ›› Ensure that a semi-circle extending 100 meters downwind and to each side

of your flying position is clear of people and obstructions. ›› Use a kite leash that allows you to keep the kite under control. ›› When not in use, inflated canopies must be secured with sand or heavy objects.

A canopy filled with air can fly away at any time, injuring people and

in extreme cases even kill them.

2. 3 . DA NG E RS F RO M KI TE L IN E S

›› Never touch the kite lines when the kite is under wind load as these lines

are dangerously sharp when under tension.. ›› Never use kite lines damaged with knots, nicks, cuts etc. They must be changed! ›› Use only lines that have no knots in them, as knots can weaken lines by as much as 50 %. ›› Do not touch the lines of the canopy, unless the kite has been secured to the ground.

An unsecured kite can re-launch unexpectedly, putting the line dangerously

under tension. ›› Never tie lines around your arms or other body parts!!

2. 4 . DA NG E RS F RO M THE K IT EB OAR D

›› A collision with the Kiteboard might cause serious head injuries ›› Injuries to the legs and feet are also possible

2. 5 . DA NG E RS TO U NI NVOLV ED TH IR D PAR TI ES

›› It is within your responsibility to check whether uninvolved people or other

athletes may be endangered or injured by your actions or your gear. ›› Do not kite at places where uninvolved third parties might get injured. ›› Avoid flying the kite in the vicinity of other water users such as swimmers,

kayakers, windsurfers, water-skiers and boaters.

north kiteboarding bar 11 manual

ENG L IS H

2. SAFETY AND PRECAUTIONS

2. 6 . WE A HT ER R E LAT ED DAN GE R S

›› Avoid offshore wind. ›› Be careful with onshore wind. ›› Get information on tidal and sea current conditions at your kiting spot! ›› Get information from both the weather report and the locals on

prevailing weather conditions. ›› Never use the kite with wind forces so strong that you are unable

to maintain precise control. ›› Do not use the kite when wind conditions are likely to change dramatically. ›› Never use this kite when thunderstorms are nearby or when such storms have

a good chance of developing (check the weather report!). ›› Leave the water immediately when a storm is approaching.

You are in a life threatening situation since you may be struck by lightning!

The listed risks cannot be complete.

The basic rules for kiteboarding comply with those of common sense and are valid for all outdoor sports.

BFT

M/S

0 – 0,2

0,3 – 1,5

1,6 – 3,3

3,4 – 5,4

5,5 – 7,9

8,0 – 10,7

10,8 – 13,8

13,9 – 17,1

17,2 – 20,7

20,8 – 24,4

24,5 – 28,4

28,5 – 32,6

32,7 +

KM/ H

0 – 0,8

0,9 – 5,5

5,6 – 12,1

12,2 – 19,6

19,7 – 28,5

28,6 – 38,8

38,9 – 49,8

49,9 – 61,7

61,8 – 74,6

74,7 – 88,0

88,1 – 102,0

102,1 – 117,0

117,1 +

MPH

0 – 0,6

0,7 – 3,5

3,6 – 7,5

7,6 – 12,2

12,3 – 17,8

17,9 – 24,0

24,1 – 31,0

31,1 – 38,3

38,4 – 46,4

46,5 – 54,7

54,8 – 63,6

63,7 – 73,0

73,1 +

KNOTS

0 – 0,5

0,6 – 3,0

3,1 – 6,5

6,6 – 10,5

10,6 – 15,5

15,6 – 20,9

21,0 – 26,9

27,0 – 33,3

33,4 – 40,3

40,4 – 47,5

47,6 – 55,3

55,4 – 63,4

63,5 +

DESIGNATION

Calm

Light Air

Ligth Breeze

Gentle Breeze

Moderate Breeze

Fresh Breeze

Strong Breeze

Near Gale

Gale

Strong Gale

Stor m

Violent Storm

Hurr icane

north kiteboarding bar 11 manual

3. SYSTEM

3. 1 . TR UST B AR

North Kiteboarding’s new Trust Bar has been completely reworked and combines a variety of new functions. It forms the basis of our ﬁve line and four line bar and is supplied with a completely redesigned Iron Heart III and a new safety leash. The standard settings are suitable for most riders and all North kites models. The setup can be individually adjusted according to the rider’s individual size and preferences.

1. Iron Heart III

2. Safety Leash

3. Metal Center Part

4. Sticky Bar Grip

5. Free Sliding Stopper

and Stopper Ball

6. Micro Loop Upgrade

Kit (not included)

7. One 4 all

8. Vario Cleat

9. Soft Winder

10. Webbing Adjuster (only

Snowkitebar)

Specifications in accordance with the French norm NFS 52-503

Manufacturer: North Kiteboarding Usage: kitesurf / snowkite Compatible kites: all Kites produced by North Kiteboarding Technology: release grip to be pushed away from the body Rider’s weight max. / min.: 120kg / 35kg

north kiteboarding bar 11 manual

ENG L IS H

3. 1 .1 . TR US T B AR 5T H E LE M EN T

The Trust Bar 5th Element can be used with all North five line kites for maximum safety on the water.

The Trust Bar 5th Element is supplied ready to use with all lines and a safety leash. The standard settings are suitable for most riders and all North kite models. The setup can be individually adjusted according to the rider’s individual size and preferences.

1. Back Lines

2. Front Lines

3. Safety Front Line above the Y

with 2 mm Dyneema line

4. Safety Front Line under the Y

5. Grey strong Middle L ine

6. Red Safety Line for Trust Bar

5th Elemen

3. SYSTEM

north kiteboarding bar 11 manual

3. SYSTEM

3. 1 .2 . TR US T B AR QUA D C ONT RO L

The Trust Bar Quad Control has been especially developed for certain North kites. It offers maximum safety with all the freedom of a four line bar.

Important: don’t forget that a four line bar can never match the safety of a five line bar!

The Trust Bar Quad Control is supplied ready to use with all lines and a safety leash. The standard settings are suitable for most riders and all North kite models. The setup can be individually adjusted according to the rider’s individual size and preferences.

1. Back Lines

2. Front Lines

3. Grey strong Middle L ine

4. Red Safety Line for

Trust Bar Quad control

north kiteboarding bar 11 manual

ENG L IS H

3. 2 . IR ON H E AR T I II

The newly developed Iron Heart III offers a variety of new functions that make kiting easier and safer. In order to avoid possible mistakes in using the new system, you should familiarize yourself with all its functions and proper usage by carefully reading the manual.

Important: always make sure that your Iron Heart III functions properly and always perform a test release before you start kiting! Check if the Iron Heart III is clean and rinse it carefully in water to remove any dirt, sand or little twigs.

1. Safety Line

2. Depower Line

3. Plastic Head / Micro Hook

4. Roto Head

5. Release Handle

6. Release Pin

7. Suicide Ring

8. Chicken Dick

9. Chicken Loop

10. Safety Leash

3. SYSTEM

north kiteboarding bar 11 manual

4. FUNCTION S

4. FUNCTIONS

4. 1 . SA F ET Y LE A SH

The new safety leash has a specially developed carabiner that is covered with a neoprene sheath. This sheath prevents injuries and keeps the carabiner from getting accidentally caught in any lines or other objects. Furthermore, the safety system at the other end of the leash allows you to completely separate yourself from the kite in an emergency situation.

Important: the safety leash must be tied to the Suicide Ring before you launch the kite. Always remember that your safety leash is the last connection between you and your kite. Only release it in a case of extreme emergency and remember that an uncontrolled kite is a great danger for other individuals on land and on the water.

4. 1 .1 . AT TACH I NG THE S A FE TY LE ASH TO T HE IR ON HE AR T III

1. Pull back the neoprene cover and open the carabiner.

2. Hook the carabiner into the small eye of the Suicide Rings at your Iron Heart III.

3. Push the neoprene sheath back up in order to safely cover the carabiner.

1 2 3

north kiteboarding bar 11 manual

ENG L IS H

4. 1 .2 . AT TACH I NG THE S A FE TY LE ASH TO T HE HA RN E SS

1. Thread the red line at the release grip through the metal ring of your harness.

2. Pull the loop of the red line over the release pin.

3. Pull the release grip down while you push the release pin down.

4. Let go of the release grip so that the release pin disappears inside the grip.

4. 1 .3 . REL EA SIN G T H E SA F ET Y L EA S H

1. Grab the release grip with your whole hand and push it away from your body.

2. The release mechanism is triggered by pushing the release grip down.

3. The safety leash is then completely released from your harness.

4. FUNCTION S

1 2 3 4

1 2 3

north kiteboarding bar 11 manual

4. FUNCTION S

4. 2 . SA F ET Y MO D ES

The new Iron Heart III has two different safety modes. The Standard Safety Mode and the Suicide Mode. Depending on your skills and requirements you can opt for one of these modes before you take off.

Important: North Kiteboarding recommends using only the Standard Safety Mode because it permits completely depowering the kite. North does not recommend using the Suicide Mode at any time since this mode makes it impossible to com pletely depower the kite in certain situations. The Suicide Mode may only be used by very experienced riders if necessary. Riders who use the Suicide Mode must be aware of the consequences and bear responsibility for all resulting damages!

4. 2 .1 . ST A NDAR D S AF ETY M O DE

4. 2 .1 .1. S ET TIN G U P T HE STA NDAR D S AFE TY MO DE

1. The metal ring (Suicide Ring) at the Iron Heart III is only attached to the red safety

line and has no other connection to any other part of the system. The safety leash is hooked into the small eyelet of the Suicide Ring.

2. If you let go of the bar and Iron Heart III in this mode, it will slide up along the red

safety line towards the kite.

1 2

north kiteboarding bar 11 manual

ENG L IS H

4. 2 .1 .2. R ELE AS I NG I N S TANDA R D SAF ET Y M OD E WH IL E H OOK ED IN

1. To separate yourself from your kite in an emergency situation while you are hooked in,

simply push the red release grip at the Iron Heart III away from your body.

2. This separates the connection between your harness hook and the bar. The bar and

Iron Heart slide along the red safety line towards the kite. The kite comes down safely and depowers on the red safety line.

4. FUNCTION S

1 2

north kiteboarding bar 11 manual

4. 2 .2 . SU IC I DE M O DE

4. 2 .2 .1. S ETT IN G U P T H E SUI CI D E MO D E

1. The metal ring (Suicide Ring) at the Iron Heart III is attached to the red safety line and

the safety leash is hooked into the little eyelet of the Suicide Ring. Additionally, the chicken loop runs through the large eye of the Suicide Ring.

2. If you let go of the bar and Iron Heart III in this mode, the bar is unable to slide up

along the red safety line towards the kite. This means that the kite cannot be completely depowered. The kite will always retain a considerable pull.

Important: You must be aware of the fact that in such a situation, the Iron Heart is out of your reach can therefore not be released.

4. FUNCTION S

1 2

north kiteboarding bar 11 manual

ENG L IS H

4. 2 .2 .2. R ELE AS I NG I N S UIC ID E M OD E WH ILE H O OK ED IN

1. In order to separate yourself from the kite in an emergency situation while hooked in,

simply push the red release grip at the Iron Heart III away from your body.

2. This will separate the connection between your harness hook and the bar. The Suicide

Ring automatically comes off the chicken loop.

3. The bar and Iron Heart will slide along the red safety line towards the kite. The kite

comes down safely and depowers on the red safety line.

Important: if the Suicide Ring should be bent out of shape after a hard crash or other impact it must be immediately replaced. Do not attempt to bend the ring back into shape. If the ring loses its round shape it is no longer functional and may cause malfunction of the safety system.

4. FUNCTION S

1 2 3

north kiteboarding bar 11 manual

4. 3 . RE A SS EMB LI N G TH E IR ON H E AR T I II AF TE R REL EA SE

Important: keep the red safety line pulled in during assembly and keep an eye on your kite at all times. Make sure not to get caught in drifting lines. Never wrap any lines around your wrist or other parts of your body.

1. Hold the release grip pulled upwards and make sure that the Release Pin is open.

2. Put the chicken loop ring on the small metal plate below the Release Pin.

3. Close the Release Pin with one ﬁnger while you are still pushing the release grip up.

4. Let the release grip slide down to lock the Release Pin in place.

4. FUNCTION S

1 2 3 4

north kiteboarding bar 11 manual

ENG L IS H

4. FUNCTION S

4. 4 . ROT O HE A D

The Roto Head permits you to untangle the lines after a rotation jump or a kiteloop while you are riding. It is not necessary to remove the safety leash because the red safety line runs through the center of the Iron Heart III.

Important: Always clean the Roto Head after riding by immersing it in clean water and moving it around. This prevents damage from sand and dried up salt.

4. 4 .1 . UN TAN GLI NG T HE F R ON T L IN ES

1. Simply grab the Roto Head with one hand and rotate it against the direction in which

the lines are twisted.

2. After the lines were untangled, the Iron Heat III is able to resume its proper function.

1 2

north kiteboarding bar 11 manual

4. FUNCTION S

4. 5 . FL I P FL OP C HI C KE N DI CK

The new Chicken Dick makes it easier for you to lock the chicken loop. This prevents accidental unhooking of the chicken loop from the harness hook. For unhooked tricks you can easily push the Flip Flop Chicken Dick to the side so that it is not in your way when hooking back in.

4. 5 .1 . HO W TO US E T H E FLI P F LO P C HI CKE N D IC K

1. For unhooked tricks, simply push the Flip Flop Chicken Dick to the side.

2. To avoid accidental release, push the Chicken Dick into the harness hook below the

Chicken Loops while you are hooked in.

4. 6 . VARI O CL EAT

The Vario Cleat is a multi-functional depower adjuster. The Vario Cleat allows you to adjust the power of the kite during the ﬂight. In order to assure optimum access to the Vario Cleat it can be easily adjusted according to the rider’s body size.

1 2

north kiteboarding bar 11 manual

ENG L IS H

4. FUNCTION S

4. 6 .1 . DE POW ERI NG

1. Pull the black adjuster towards your body until you get the desired depower effect.

2. Let go of the adjuster and the line will be locked between the teeth of the Vario Cleat.

3. In order to prevent the adjuster from getting tangled it can be locked in position with

the Velcro at the Sliding Stopper.

4. 6 .2 . PO W ER ING U P

1. Pull the black adjuster a short distance towards your body.

2. At the same time, move the adjuster away from the Vario Cleat, so that the teeth of

the cleat release the line.

3. Now let the line slide back until you get the desired power.

4. Move the adjuster back towards the Vario Cleat, so that the teeth of the cleat can

lock the line.

1 2 3

1 2 3 4

north kiteboarding bar 11 manual

4. FUNCTION S

4. 6 .3 . POS IT ION IN G TH E VA RI O C LEAT

The Vario Cleat can be adjusted to the rider’s body size or personal preferences. This makes the adjuster equally easy to reach for both tall and short riders.

Important: the position of the Vario Cleat may only be changed on land. Always check if you can easily reach the Vario Cleat each time before you take off.

1. Pull the grey webbing on the back side of the Vario Cleat.

2. Pull some of the grey depower line through the Vario Cleat.

3. Now push the Vario Cleat up or down, according to your preferences.

(This decreases or increases the depower throw of the bar. The depower throw of the adjuster decreases or increases accordingly.)

4. After adjusting the position, pull the grey webbing back in place.

1 2 3 4

north kiteboarding bar 11 manual

ENG L IS H

4. FUNCTION S

4. 7 . FR E E SL ID I NG S TO P PE R A ND S TOP PE R BAL L

The bar stopper allows you to quickly adjust the depower travel on the water. The bar can then be put down on the bar stopper to reduce the strain on the rider’s arms.

Important: the bar stopper should only be used in safe conditions since it reduces the kite’s depower abilities. Before returning to the beach, the stopper must be positioned as far away from the body as possible!

4. 7 .1 . AD JU S TI NG T HE BA R S TOP PE R

1. To bring the bar stopper down, simply grab the Stopper Ball and pull it towards your

body.

2. To bring the bar stopper back up, grab the Sliding Stopper and push it away from your

body.

3. By pushing hard against the Stopper Ball with the bar, you can also move it back up.

4. By rotating the Stopper Ball you can increase or decrease the resistance of the ball

and make it easier or harder to push the ball away.

Important: The bar is always supplied with the Stopper Ball in the our recommended and safe “soft” position.

SOFT

HARD

1 2 3 4

north kiteboarding bar 11 manual

4. FUNCTION S

4. 8 . ON E 4 A LL

The One 4 All system allows you to individually adjust the bar width. The narrow position of 46 cm reduces the kite’s turning speed and is recommended for smaller kites and for New School tricks. The wide position of 55 cm is for maximum control and fast turning, suitable for larger kits, freeriding or wave riding.

4. 8 .1 . AD JU S TI NG T HE BA R W I DT H

1. Push the sponge rubber sheath up and open the lark’s head at the leader lines.

2. Push the line through the hole to the other side.

3. Tie the loop with a lark’s head to the knot in the middle (default setup of the Trust Bar)

of the Leader Lines.

4. Pull the sponge rubber back over the knot as far as it will go.

4. 9 . MI C RO L OO P AND M IC RO H OO K

In order to use this feature you need the Micro Hook Upgrade Kit. The Trust Bar is not supplied with this kit. You can ﬁnd the assembly instructions under 5.2. and 5.3.

The Micro Hook System offers an opportunity to ride with the Trust Bar permanently hooked in. This reduces the strain on your arms and transfers more power to the harness. The Micro Loop is attached at an angle that prevents unintended catching of the hook.

Important: if you should ﬁnd yourself in a dangerous situation while using the Micro Loops, you can disconnect by releasing the Iron Heart III safety system. The kite will then depower on the safety line.

1 2 3 4

north kiteboarding bar 11 manual

ENG L IS H

4. FUNCTION S

4. 9 .1 . HO OK I NG I N TO T HE MI CR O L OO P

1. Pull the bar towards your body so that the Micro Loop faces the Micro Hook.

2. Tilt the bar slightly forward and bring the Micro Loop under the Micro Hook.

3. Let the bar slide up so that the Micro Hook catches the Micro Loop.

4. 9 .2 . UN HO O KI NG T HE MI CR O L OO P

1. Pull the bar towards your body.

2. Tilt the bar slightly backwards so that the Micro Loop is released from the Micro Hook.

3. The bar is now free again and the entire depower range is at your disposal.

1 2 3

north kiteboarding bar 11 manual

4. FUNCTION S

4. 1 0. KOOK PR O OF L IN E A TTACH MEN T

One of the most common mistakes in setting up a kite is getting the steering lines and the ﬂying lines mixed up. In order to avoid this problem, North Kiteboarding has developed the Trust Bar and the Kook Proof System. The color code and the alternating position of the loops and knots permits only the right connection.

Important: the Kook Proof System works only in connection with a North kite.

4. 1 0. 1. AT TAC HI NG T HE BA R TO TH E K ITE

1. Lay the line ends of the bar to the corresponding pig tails of the kites.

2. Tie the loops with a lark’s head to the knots at the opposite ends and pull them tight.

1 2

red red blue grey grey

Trus t Bar 5 th El eme nt

red red grey grey

Trus t Bar Q uad C ont rol

Ki te

Back Front 5th Line Front Back

Ki te

Back Front Front Back

north kiteboarding bar 11 manual

ENG L IS H

5. REPLACI NG PART S

5. REPLACING PARTS

5. 1 . RE P LACI NG TH E R U BB ER L INE

1. Remove the bottom side of rubber line from the groove with the help of a

small screw driver.

2. Pull the rubber line up and out through the release grip of the Iron Heart.

3. Insert the new rubber line into the release grip from above. Place the bottom side

back into the groove.

4. Make sure that both ends of the rubber line are in proper position in the grooves.

5. 2 . FI T TI NG TH E MI C R O LOO P (M IC R O L OOP UPG RA D E K I T)

1. Thread the open end of the Micro Loop from above through one of the Micro Loop

holes in the bar. Pull only at the end of the loop to avoid pulling off the rubber tube.

2. Lead the Micro Loop behind the Depower Lines from underneath up through the sec-

ond hole.

3. Insert the black plastic piece into the open loop.

4. Pull the Micro Loop down hard so that both plastic pieces disappear inside the holes.

1 2 3 4

north kiteboarding bar 11 manual

5. REPLACI NG PART S

5. 3 . FI T TI NG TH E MI C R O HOO K (M IC R O L OOP UPG RA D E K I T) / RE P LACI NG TH E DE POW ER L INE

1. Remove the Suicide Ring from the Safety Line and pull it out of the Iron Heart III.

2. Remove the u-shaped bolt at the Roto Head by using a small screwdriver as a leaver

and making little movements. If the bolt is seized, you can tap it out from the opposite side with an awl or prickle.

3. Remove the Plastic Head with the Depower Line from the Roto Head.

4. Replace the damaged Depower Line or replace the Plastic Head with the Micro Hook.

5. Make sure that you insert the Depower Line properly.

6. Move the Depower Line back and forth after inserting it before you put the u-shaped

bolt back in place.

7. Carefully tap the u-shaped bolt back into the holes at the Roto Head.

8. Thread the Safety Line with the help of a thin line or a thin wire through the Iron Heart.

9. Attach the Suicide Ring with a lark’s head to the Safety Line.

1 2 3 4

5 6 7 8

north kiteboarding bar 11 manual

ENG L IS H

5. REPLACI NG PART S

5. 4 . RE P LACI NG TH E CH IC K EN L OO P / CH IC K EN D IC K

1. Push the release grip up and open the Release Pin. This keeps a little opening at the

release grip when you let go of it.

2. Observe the markings above the metal bolt.

3. The metal bolts must always be removed from the opposite side of the marking.

4. Carefully remove the metal bolt with the help of an awl and a hammer.

5. Replace the damaged component.

6. Insert the metal bolt into the hole with the knurled end pointing backwards from the

side of the marking.

7. Carefully tap the bolt into the Iron Heart until it is ﬂush with the plastic piece.

1 2 3 4

5 76

north kiteboarding bar 11 manual

6. TIPS A ND TRICKS

6. TIPS AND TRICKS

6. 1 . TR I M CH EC K

6. 1 .1 . ST A NDAR D S ET UP OF T HE BA R ( UP ON DE L IV ER Y )

1. The Vario Cleat must be completely open (maximum kite power).

2. Put the Iron Heart III as close as possible to the bar.

3. The Leader Lines must be tied to the central knots of the Bar Pigtails.

4. The attachment points of the Leader Lines should now be approximately at the same

level as the Pulley at the Depower Line.

Basic Setting

Pulley

Vario Cleat

Leader Line

Bar Pigtail

Depower Line

north kiteboarding bar 11 manual

ENG L IS H

6. TIPS A ND TRICKS

6. 1 .2 . CH EC K IN G L IN E L EN G TH

Since the lines stretch over time it is recommended to check the line length before each use and to adjust the lines for a proper trim of the bar.

1. Carefully lay out the lines and separate them. Thread the line ends on a string and tie

it to a tree or similar object.

2. Make sure that your bar is in the standard setup shown above.

3. Take the bar and pull the lines taut. The Iron Heart must touch the bar.

4. Check the length of the lines. All lines should have the same length.

5. If this should not be the case, you can adjust the length of the lines at the points a, b

and c.

north kiteboarding bar 11 manual

6. 1 .3 . EX TE N DI NG T HE FI FT H L IN E O F T H ET RU S T BAR 5 T H ELE ME N T

Important: this setup is only relevant for the Trust Bar 5th Elemenet . The bar is supplied with a special Extension Loop.

If the two front lines should have stretched to an extent that the difference in line length can no longer be compensated by adjusting the ﬁfth line as described in chapter 6.1.2, the Extension Loop will solve the problem.

1. Ideally, section a of the ﬁfth line should have the same length as the ﬂying lines

b and c.

2. If section a should be shorter than the ﬂying lines b and c, the Extension Loop

must be attached to the end of the ﬁfth line.

6. TIPS A ND TRICKS

north kiteboarding bar 11 manual

ENG L IS H

6. 1 .3 .1. AT TAC HI NG T HE EX TE N SI ON LO OP

1. Thread the end of the ﬁfth line through the small eye of the Extension Loop

2. Pull the end of the Extension Loop through the loop of the ﬁfth line.

3. Pull the ﬁfth line and the Extension Loop to tighten the knot.

6. 1 .4 . ST RE T CH IN G TH E F LY I NG LI NE S

In case that one line has stretched more than another, the shorter line may be stretched in the following way to make up for the difference in length.

1. Tie the shorter line to a tree or similar solid object.

2. Stretch the line by pulling it until it has the same length as the remaining lines.

1 2

1 2 3

6. TIPS A ND TRICKS

north kiteboarding bar 11 manual

7. MAINTENANCE AND CARE

To ensure that your Trust Bar always functions properly, you must observe the following points:

›› Always rinse the entire Trust Bar in clear water after use. Open the Iron Heart III to clean

it on the inside as well. ›› Clean the Roto Head after each use by moving it around in clear water. This helps

remove sand and dried up salt. ›› Check the function of the Iron Heart III each time before you take off and perform a

test release! Make sure that there is no dirt, sand or other foreign bodies inside the Iron

Heart III. If this should be the case, clean the Iron Heart III in water. ›› If the Suicide Ring should be bent out of shape after a hard crash or other impact it

must be immediately replaced. Do not attempt to bend the ring back into shape. If

the ring loses its round shape it is no longer functional and may cause malfunction of

the safety system.

Follow the instructions below for the regular inspection of the safety system’s individual components. Check for proper function and signs of wear and tear. Replace any worn or damaged parts with original NKB spare parts following the instructions provided in the manual. All parts should be inspected thoroughly after a maximum of 30 days of usage on the water.

IN J EC TIO N MO LD E D PL AS TIC PAR TS

Inspect the release grip carefully for ›› cracks (risk of breakage) ›› sharp edges caused by breakage (risk of injury and possible damage of the lines!!!) Check the hole of the Iron Heart release grip. The shape or diameter of the hole should not be altered signiﬁcantly.

7. MAINTENA NCE AND CARE

north kiteboarding bar 11 manual

ENG L IS H

ME T A L PA RT S

›› The surfaces of Cr-Ni steel parts should not show any black discoloration (see also

maintenance of Cr-Ni steels in the Iron heart Manual). ›› Metal parts must not be bent out of shape (pins, center part). ›› Moving and locking parts must not show excessive wear. Thoroughly check all parts for

evidence of cracks and replace any parts that show the smallest evidence of cracks

or fissures.

LI N ES

›› The depower line consists of thousands of fine fibers. This line is exposed to friction that

can cause these fibers to break. If a high number of these fine fibers are broken, the

depower line’s strength may be considerably reduced even though there is now visible

reduction in the line’s diameter. ›› The leader lines are not exposed to friction and should therefore not show any fiber

breakage. Wear and tear may occur, however, due to external influences.

CH I CK EN L O OP – CH I CK EN D ICK

›› Check the sleeve for cracks and fissures. ›› The sleeve must not show excessive wear in the area of the hook (excessive wear causes

the sleeve to lose its rounded shape in this area). ›› The seams must not be worn, torn or undone. ›› Check the loop in the Dyneema line at the end of the chicken loop for excessive wear

and evidence of broken fibers.

Recommended intervals for inspection and maintenance depending on the rider’s weight: ›› up to 75 kg body weight, after 30 days of usage ›› above 75 kg body weight, after 20 days of usage

SA F ET Y LE A SH

›› The shackle joint mechanism of the leash must not have excessive play. ›› The Dyneema line that holds the pin must be checked for fiber breakage. ›› The sleeve must not show any signs of cracks. ›› The plastic sleeve above the release grip must not be bent or cracked. ›› The seems must not be undone, torn or damaged by abrasion.

7. MAINTENA NCE AND CARE

north kiteboarding bar 11 manual

8. WARRANTY POLICY

North Kiteboarding Warrants this Product to be free of Major defects in material or workmanship to the original purchaser for a period of six months from the original date of purchase. This warranty is subject to the following limitations:

›› The warranty is valid only when the product is used for Kiteboarding on water and does

not cover products used in rental or teaching operations. ›› North Kiteboarding will make the final warranty determination, which may require

inspection and/or photos of the equipment, which clearly show the defect(s). If neces-

sary, this information must be sent to the North Kiteboarding distributor in your country,

postage prepaid. ›› If a product is deemed to be defective by North Kiteboarding, the warranty covers the

repair or replacement of the defective product only. ›› North Kiteboarding will not be responsible for any costs, losses or damages incurred as

a result of loss of use of this product. The warranty does not cover damage caused

by misuse, abuse, neglect or normal wear and tear including but not limited to, rigging

with other than North Kiteboarding components, damage due to excessive sun

exposure, damage caused by improper handling or storage, damage caused by use in

the waves or shore break and damage caused by anything other than defects

in material and workmanship. ›› This warranty is voided if any unauthorized repair, change or modification has been

made to any part of the equipment. The warranty for any repaired or replaced

equipment is good from the date of the original purchase only. The original purchase

receipt must accompany all warranty claims. ›› The name of the retailer and date of purchase must be clear and legible. ›› There are no warranties that extend beyond the warranty specified herein.

WA RRA NT Y CL A IM S

›› Warranty claims must be processed and be issued a return authorization prior to

shipping to North.

8. WARRANTY POLIC Y

north kiteboarding bar 11 manual

ENG L IS H

Cover

RIDER: Mallory de la Villemarqué PIC: Ludovic Franco

UV varnish coating recyclable Inﬁnity – Sri Lanka

For further information please visit:

www.northkites.com

North Kite Trust BAR 11 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual