Northern KP-10, KP-11, KP-12, KP-13, KP-10-BRASS Specification

KP-10, KP-11

KP-12, KP-13

KEYPADS

The Northern Computers' KP-10, KP-11, KP-12, and KP-13
keypads offer security without the use of a card. The users need only
enter their personal numerical code to gain access.

The unsurpassed ability of these keypads to tolerate virtually any
environment enables them to function reliably in extreme climate
conditions, yet their aesthetic design allows for installation inside any
office building. The KP-10 and KP-11 keypads are constructed out of
stainless steel. The KP-12 and KP13 keypads are constructed of a
durable plastic.

The piezo technology allows the keypads to be activated by user touch,
without any moving parts or contacts that can corrode over time. An
audible beep and visual indication are generated with each key pressed.
The elimination of moving parts gives these keypads unquestioned
dependability.

The KP-10 and KP-12 keypads can also be used in conjunction with a
card reader of choice to provide a higher level of security.

BENEFITS

ACCESS
CONTROL
SOLUTIONS

Rugged stainless steel construction

Impact and weather resistant

Designed for indoor and outdoor use

Status monitoring LEDs

LED power indicator

Vandal resistant

No moving parts to wear out

Audio/visual feedback

KP-10 and KP-12 provide 2 of 7 matrix output

KP-11 and KP-13 emulate a 32 bit Wiegand output

KP-11 and KP-13 are selectable for 5 or 12 volts

KP-11 and KP-13 have programmable site code

KP-10, KP-11

KP-12, KP-13

ORDERINGINFORMATION

Weatherized Keypads

KP-10

12 wire, stainless steel

KP-10-BRASS

12 wire, brass

KP-11

5 wire, 32 bit Wiegand output
stainless steel

KP-11-26

5 wire, 26 bit Wiegand output

KP-11-ABA

5 Wire, ABA output

KP-12

12 wire, stainless steel

KP-12-BRA

12 wire, braille

KP-12-BRS

12 wire, brass

KP-12-ILL

12 wire, illuminated

KP-13

5 wire, 32 bit Wiegand output

KP-13-26

5 wire, 26 bit Wiegand output

KP-13-BRA

5 wire, braille

KP-13-BRS

5 wire, brass

KP-13-ILL

5 wire, illuminated

Consult your Northern Sales

Representative for more

information.

SPECIFICATIONS

•

Dimensions

KP-10/KP-11 - 5.125" H x 3.375" W x .50" D

KP-12/KP-13 -7.50" H x 1.75" W x .75" D

•

Weight - 16 oz (470 gm)

•

Operating Temperature - –40° F to 160° F (–40° C to 71° C )

•

Mounting Methods

KP-10/KP-11 - Directly to a single gang switchbox or surface

KP-12/KP-13 - Mullion or surface mountable

•

Cabling -

KP-10/KP-12 - Requires 12 conductor (0.75 mm) shielded cable,

KP-11/KP-13 - Requires 5 conductor with overall shield cable,

(13.018 cm H x 8.573 cm W x 1.27 cm D)

(19.05 cm H x 4.445 cm W x 1.905 cm D)

100% relative humidity (weather resistant)

mount by direct wiring through a wall

12 wire, 18 AWG, NC18121-YL-500 or
NCP1821-YL-500 (Plenum),
maximum distance: 500 ft (152 m)

5 wire,18 AWG NC1861-BL-500 or
NCP1861-BL-500 (Plenum),
maximum distance: 500 ft (152 m)

Specifications subject to change without notice.
© 2001 Northern Computers, Inc. All rights reserved.

5007 South Howell Ave.
Milwaukee, WI 53207
www.nciaccessworld.com

Tel: [phone]

[phone]

Fax: [phone]