Nortel Vista 100 Setup

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

4

67

5

Wall Mount

Connect the receiver and receiver
cord .

Attach the wedge-shaped base in
desk mount or wall mount†position.

Connect the line cord

.

Connect the power adaptor .

Attach the language faceplate. Attach the receiver card and lens

(shiny-side down).

Place you Vista 100 Phone on a
table or hang it on a wall. Then fit
the Discovery Card over the keys on
the phone

When you have power:

When you plug in your new phone, you may see a message on the display ask­ing you to make a language selection. Read the directions on the display to
select one of two languages.

Vista 200 also runs a test to ensure that the phone cords are connected properly. If
the test fails, the display will prompt you to check the phone cords. Make sure
all connections are fastened securely.

3

1

Desk Mount

2

1

† For wall mounting we recommend that you use a wall mounting plate, which your local telephone company
can install. The excess line cord fits into the stand of the phone for wall mounting.

Installing Your Vista 100 Phone

Set Up as easy as 1,2,3

The next step in setting up your telephone is to customize Vista 100’s fea­tures. Vista 100 gives you five feature options that let you personalize your
phone

Finding the hidden SET OPTIONS key

See the Discovery Card to locate the SET OPTIONS key on your phone. Then
move the sliding panel below the display and press the SET OPTIONS key to
see each of the five choices. You can change any of the five feature options
by following the change procedure below.

Choice of Five Feature Options

1. Change the Language

You have a choice of display messages in one of two languages.

2 Set the Time and Date

You can set the time and date. If you subscribe to Call Display, the current
time and date are automatically set for you when the first call comes in (or

even after a power failure).

3. Set the Ring Tone and Ringer Volume.

You can choose one of four different ring tones. And while you are selecting
the ring tone, you can adjust the ringer volume by pressing the volume bar
— below thedial pad. Use Ó to end only when you are sat­isfied with ring tone and ringer volume.

4. Turn the Light OFF

If you dont want the light feature ON, you can turn it OFF.

5.Enter Your Area Code

You can enter your area code to display local calls without the area code.

To Change any of the five feature options, follow these steps:

1. Don’t pick up the receiver.

2. Slide the Panel (below the display) and press the SETOPTIONS key.

3. Press p to move through the list of featureoptions

OR
Press the desired option number on the dial pad. (For example, when [five items in

list] appears on the display, press 2 to set the time and date.)

4. Press the selected option number again (

1 through 5) and follow the instructions

on the display to make a change.

Setting the time and date

• • • • • • • • • • • • • • •• ••

2

After you have set up your phone, save emergency numbers and phone numbers of
your family and friends in Vista 100’s six memory keys.

How to save a number in memory

1. Press Ó and follow the instructions on the display.
NOTE: presso to program a pause into a memory key when entering

numbers.

For example, to enter the number 555-1440:

1. Press Ó.

2. Press the memory key where you want to save the number.

3. Press 5551440.

4. Press Ó.

5. Write the name (in pencil) in the space provided on the reciever card.

To erase the contents of a memory key:

1. Press the memory key to see its contents.

2. Press [#] then [#] again to erase. You can also save new numbers over old ones.

Saving Subscribed Services into Memory

You can save telephone company features in memory for easy one
key access. Some call management services do not require an off
code, while others like call forwarding require both an ON and OFF
mode to operate the feature.

Simply save the ON feture code in one memory key and the OFF fea­ture code into another. When you turn a feature ON, vista 100’s light
comes ON (if saved on a key).

Contact your local telephone company for more information about
how you can subscribe to these services.

The following examples show you how to save an ON and OFF key
for a telephone company feature:

• • • • • • • • • • • • • • •• ••

Saving frequently called
numbers in memory

3