Business Seri es Terminal
Doorphone
User Guide
About the Business Series Terminal Doorphone
✙
✙
The Business Series Terminal (BST) Doorphone is used as an intercom
to control access to your building. Pressing the Call button on the BST
Doorphone calls one or more telephones, and/or sends a dist inctive
chime to telephones in an assigned page zone.
Placing an internal call from any telephone on the system to the BST
Doorphone sets up a two-way voice call.
Additionally, a Door Opening Controller can be installed to permit the
activ ation of loc ks on doors or gat es. Contact y our sys tem administr ator
for more information.
Call butto n
1
To answer the BST Doorphone
When the Call button on the BST Doorphone is pressed, one or more
telephones will ring and the name of the BST Doorphone will appear on
the telephone display.
f more than one BST Doo rphone is installed on y our system, ea ch one
I
can be programmed to call any telephone.
The chime
If the BST Doorphone call is not answer ed wit hin t he prog r ammed number of rings, you will hear a page tone followed by a distinct ive chime.
Note:
The BST Doorphone can also be programmed to send the
chime without ringing.
If more than one BST Doorphone is installed on your system, each BST
Doorphone can send a unique chime.
To respond
A BST Doorphone call can be answered like any internal call ringing at
your display telephone. Simply pick up the handset or press the handsfree button.
To respond to the BST Doorphone chime or initiate communication at
any time, place an internal call to the appropriate BST Doorphone.
Press the intercom bu tton and dial the BST Doorphone’ s extension
number or press an internal autodial button assigned to the BST Doorphone.
Note:
For more information on programming internal autodial buttons,
refer to your Telephone User Card.
2
The BST Doorphone answers your call immediately (without ringing)
and allows you to talk to and hear the visitor.
The display shows:
Note:
The
OPEN
and
<Doorphone name>
OPEN QUIT
QUIT
display button only appears on two-l ine
display telephones ( T7316E, T7316, M7310 or M7324) when th e BST
Doorphone is programmed to activate a Door Opening Controll er
(DOC).
When you are fini shed speaking to the visitor, press the release button
( ® or
¨
) or hang up.
To unlock the gate or door
You can unlock the door when the BST Doorphone is programmed to
activate a Door Opening Controller (DOC).
Once communication is established, the door can be opened by
dialing the single digit code or by pressing
OPEN
if you have a T7316E,
T7316, M7310 or M7324 telephone . For t he single digit code(s) , contact
your system administrator.
The display momentarily shows:
Opening door
To end the communication with the BST Doorphone, press the release
button ( ®
® or
®®
¨
), the
3716
display button or hang up.
3
Other features
You can use the BST Doorphone as a monitoring device. By calli ng the
BST Doorphone from a display telephone , you can listen for noises
near the BST Doorphone through your telephone’s speaker.
Doorphone monitoring on M7324, M7310 or M7208 telephones:
1. Press
©
and dial the extension number of the BST Door-
phone.
2. Press
©
The display shows:
3. Press
¨
to end the monitoring session.
again to turn the microphone off.
Microphone muted
Doorphone monitoring o n T7316E, T73 16 and T7 208 telepho nes:
1. Press the handsfree button and dial the extension number of the
BST Doorphone
2. Press © to turn the microphone off.
3. Press ® to end the monitoring session.
4
1-800-4 NORTEL
www.nortelnetworks.com
P0605668_02
Printed in Canada
Loading...