Nortel BCM200, BCM400, 222, BAP120, BSR222 Overview
...
SMB
Small and Medium Business
Solutions Overview and
Configuration Guide
ATTENTION
Clicking on a PDF hyperlink takes you to the appropriate page. If necessary,
scroll up or down the page to see the beginning of the referenced section.
NN47910-200
.
Document status: Standard
Document version: 02.01
Document date: 11/22/2006
Copyright © 2006, Nortel Networks
All Rights Reserved.
The information in this document is subject to change without notice. The statements, configurations, technical
data, and recommendations in this document are believed to be accurate and reliable, but are presented without
express or implied warranty. Users must take full responsibility for their applications of any products specified in this
document. The information in this document is proprietary to Nortel Networks.
3
Contents
How to get help 5
New in this release 7
New products 7
Getting started 9
Overview 9
How to use this guide 9
First step 10
Second step 10
Third step 11
Preconfiguration checklist 12
New products 13
Business Ethernet Switches 13
Existing products 15
Business Element Manager 17
Business Access Point 120 (BAP120) 17
Business Secure Router 222 (BSR222) 18
Reference topologies and assumptions 18
IP addressing for SMB devices and DHCP 19
Installing the Element Manager 21
Converged small site (mixed-vendor environment): reference
topology 1 23
Configuring a converged small site (mixed-vendor environment) 24
Smaller converged site (Greenfield and infrastructure
replacement): reference topology 2 37
Configuring a smaller converged site (Greenfield and infrastructure
replacement) 38
Smaller remote site (Greenfield and infrastructure replacement):
reference topology 3 43
Configuring a smaller remote site (Greenfield and infrastructure replacement) 44
WAN interconnected LAN reference topologies 49
Configuring tunnels 50
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
4 Contents
Interconnection of peer sites with incumbent routers (topology 1 with topology
1) 53
Interconnection of peer sites using BSR222 (topology 2 with topology 2) 54
Interconnection of main and remote sites using BSR222 and BCM200/400
(topology 2 with BCM 200/400) 55
Interconnection of BSR222 and an incumbent router (topology 1 with topology
3) 56
Interconnection of main and remote sites using BSR222 (topology 2 with topology
3) 58
Maintenance 61
Security settings 61
Key factory security defaults 61
Securing your SMB network 62
BAP120 engineering rules and guidelines 65
Device quantities 65
BAP120 performance measurements 67
Third-party WiFi client interoperability 68
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
5
How to get help
This section explains how to get help for Nortel products and services.
Getting help from the Nortel Web site
The best way to get technical support for Nortel products is from the Nortel
Technical Support Web site:
www.nortel.com/support
This site provides quick access to software, documentation, bulletins, and
tools to address issues with Nortel products. More specifically, the site
enables you to:
• download software, documentation, and product bulletins
•
search the Technical Support Web site and the Nortel Knowledge Base
for answers to technical issues
•
sign up for automatic notification of new software and documentation
for Nortel equipment
•
open and manage technical support cases
Getting help over the phone from a Nortel Solutions Center
If you do not find the information you require on the Nortel Technical Support
Web site, and have a Nortel support contract, you can also get help over the
phone from a Nortel Solutions Center.
In North America, call 1-800-4NORTEL (1-800-466-7835).
Outside North America, go to the following Web site to obtain the phone
number for your region:
www.nortel.com/callus
Getting help from a specialist by using an Express Routing Code
Toaccess some NortelTechnicalSolutions Centers, you can use an Express
Routing Code (ERC) to quickly route your call to a specialist in your Nortel
product or service. To locate the ERC for your product or service, go to:
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
6 How to get help
www.nortel.com/erc
Getting help through a Nortel distributor or reseller
If you purchased a service contract for your Nortel product from a distributor
or authorized reseller, contact the technical support staff for that distributor
or reseller.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
7
New in this release
The following section details what is new in the Nortel Small and Medium
Business (SMB) Solutions Overview and Configuration Guide for SMB
(Small and Medium Business) portfolio Release 2.0.
New products
See the following sections for information about new products.
New products in this document
Product
Section
BES50 Series Ethernet switches "New products " (page 13)
BES200 Series Ethernet switches "New products " (page 13)
BES1000 Series Ethernet switches "New products " (page 13)
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
8 New in this release
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
9
Getting started
Overview
This document provides the steps to configure three reference topologies
and their interconnections for the Small and Medium Business (SMB)
portfolio.
Use these example topologies only as a reference when you configure
your unique solution.
To reduce redundant documentation, reference the specific quick install
guides, configuration guides, and release notes.
Configuring each of the SMB reference topologies consists of individual
device configuration and solution-level configuration. All devices
(Business Secure Router [BSR222], Business Ethernet Switches [BES50,
BES100/200, BES1000], and Business Access Point [BAP120]) include a
Web interface to configure the device. The Element Manager provides a
centralized management application for launching these Web interfaces.
The Element Manager also provides integrated configuration panels for the
Business Communications Manager (BCM) and for the Business Ethernet
Switch (BES) devices.
The Business Element Manager (EM) provides a computer-based client
interface that can connect to devices over an IP network and display the
programming interface for that device. You can manage SMB devices using
the Web-based user interface that you launch from the Element Manager.
Through the Element Manager, you can configure necessary device
parameters and all the parameters for each of the reference topologies.
How to use this guide
Use this document to guide you through the steps that are required to
configure your site.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
10 Getting started
First step
Assemble all tools and documentation required to configure your SMB
network. See "SMB Preconfiguration checklist" (page 12).
Second step
Determine which reference topologies and interconnected topologies most
closely resemble your unique solution.
Then read the following sections of this guide for more detail:
•
"New products" (page 13)
• "Existing products" (page 15)
•
"Reference topologies and assumptions" (page 18)
The reference topologies do not represent a definitive solution for your
network but do offer detailed procedures that can provide a guideline for
your implementation.
•
"IP addressing for SMB devices and DHCP" (page 19)
•
"Installing the Business Element Manager" (page 21)
Stand-alone SMB sites
If your requirement is
• solely for data connectivity with no requirement for voice solutions, then
configure your site based on the "Smaller converged site (Greenfield
and infrastructure replacement)—reference topology 2" (page 37).
•
IP or traditional telephony or both, and data connectivity, then configure
your site based on the "Smaller converged site (Greenfield and
infrastructure replacement)—reference topology 2" (page 37).
•
IP or traditional telephony or both, and data connectivity, and Guest
Access application service, then configure your site based on the
"Converged small site (mixed-vendor environment)—reference topology
1" (page 23).
Linked SMB sites
Linked SMB sites offer two main types of solutions:
•
IP trunk linked sites
•
main and remote linked sites
In IP trunk linked site scenarios, both sites have a BCM telephony call
server and hence are independent. An H.323 IP trunk links the sites for
harmonized private dialing plans through branch office virtual private
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
How to use this guide 11
network (VPN) tunnels. The linked SMB sites described in this guide are
verified for small deployment using BCM50 and larger deployment using
BCM200/400 in the following interconnected reference topologies:
•
"Interconnection of peer sites with incumbent routers (topology 1 with
topology 1)" (page 53)
•
"Interconnection of peer sites using BSR222 (topology 2 with topology
2)" (page 54)
•
"Interconnection of main and remote sites using BSR222 and
BCM200/400 (topology 2 with BCM 200/400)" (page 55)
In main and remote linked site scenarios, the main office hosts a BCM
telephony call server and is linked to remote offices where IP telephony
service is provided from the main office through branch office VPN
tunnels. Generally, these remote sites are very small offices where the
cost of deploying a locally hosted BCM telephony call server cannot be
justified. The linked SMB sites described in this guide are verified for small
deployment using BCM50 and larger deployment using BCM200/400 in the
following interconnected reference topologies:
•
"Interconnection of BSR222 and an incumbent router (topology 1 with
topology 3)" (page 56)
•
"Interconnection of main and remote sites using BSR222 (topology 2
with topology 3)" (page 58)
Third step
After you determine which topology you are configuring, proceed to the
associated section of this guide, as follows:
•
If you are configuring a smaller converged site—mixed vendor
environment, proceed to "Converged small site (mixed-vendor
environment)—reference topology 1" (page 23).
•
If you are configuring a smaller converged site—Greenfield and
infrastructure replacement, proceed to "Smaller converged site
(Greenfield and infrastructure replacement)—reference topology 2"
(page 37).
•
If you are configuring a smaller remote site—Greenfield and
infrastructure replacement, proceed to "Smaller remote site (Greenfield
and infrastructure replacement)—reference topology 3" (page 43).
•
If you are interconnecting multiple sites, proceed to "WANinterconnected
LAN reference topologies" (page 49).
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
12 Getting started
Preconfiguration checklist
The following table lists the production documentation that you need to
configure your network. Ensure you have all the applicable items prior to
configuring your SMB network.
Download the latest version from
www.nortel.com/support
SMB preconfiguration checklist
Document title
Check
BAP120 1.0
Quick Installation for the Nortel Business Access Point 120 (NN47921-300)
Using the Nortel Business Access Point 120 (NN47921-301)
Business Access Point 120 Release Notes (NN47921-400)
BES50 1.0
Quick Installation for the Nortel Business Ethernet Switch 50 Series
(NN47924-301)
Using the Nortel Business Ethernet Switch 50 Series (NN47924-300)
Business Ethernet Switch 50 Release Notes (NN47924-400)
BES100/200
Quick Installation for the Nortel Business Ethernet Switch 100/200 Series
(NN47925-301)
Using the Nortel Business Ethernet Switch 100/200 Series (NN47925-300)
Business Ethernet Switch 100/200 Release Notes (NN47925-400)
BES1000 1.0
Quick Installation for the Nortel Business Ethernet Switch 1000 Series
(NN47927-301)
Using the Nortel Business Ethernet Switch 1000 Series (NN47927-300)
BSR222
Quick Installation for the Nortel Business Secure Router 222 (NN47922-300)
Nortel Business Secure Router 222 Fundamentals (NN47922-301)
Nortel Business Secure Router 222 Configuration – Basics (NN47922-500)
Nortel Business Secure Router 222 Configuration – Advanced (NN47922-501)
Business Secure Router 222 Release Notes (NN47922-400)
BEM 1.0
Business Element Manager 1.0 Release Notes (NN47926-400)
BCM
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
New products 13
Document title
Check
Keycode Installation Guide (N40010-301)
BCM50 1.0
Networking Configuration Guide (N0027156)
First Time Installation and Configuration Guide (N0027149)
BCM50 2.0
Installation Checklist and Quick Start Guide (NN40020-308)
BCM 4.0
Networking Configuration Guide (N0060606)
Other
IP Telephony Client Deployment Technical Solutions Guide (January 2006)
New products
SMB portfolio 2.0 includes the following new products.
Model number Description
Business Ethernet Switches
BES50FE-12T PWR 12 Port 10/100BASE-TX Fast Ethernet ports with PoE
BES50FE-24T PWR 24 Port 10/100BASE-TX Fast Ethernet ports with PoE
BES50GE-12 PWR 12 Port 10/100/1000BASE-T Gig Ethernet ports with PoE
BES50GE-24T PWR 24 Port 10/100/1000BASE-T Gig Ethernet ports with PoE
BES210-24T 24 Fast Ethernet ports, stackable
BES210-48T 48 Fast Ethernet ports, stackable
BES220-24T PWR 24 Fast Ethernet ports with PoE, stackable
BES220-48T PWR 48 Fast Ethernet ports with PoE, stackable
BES1010-24T 24 10/100/1000 autosensing ports with two shared SFP ports
BES1010-48T 48 10/100/1000 autosensing ports with two shared SFP ports
BES1020-24T PWR 24 10/100/1000 autosensing ports with two shared SFP ports
and PoE
BES1020-48T PWR 48 10/100/1000 autosensing ports with two shared SFP ports
and PoE
Business Ethernet Switches
The BES consist of three series:
•
BES50 series
•
BES100/200 series
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
14 Getting started
•
BES1000 series
BES50 series
The BES50 series is configurable with the BCM50 and other BES50s for
desktop or wall-mount installation.
•
BES50FE: The BES50FE-12T PWR offers 12 full-duplex
10/100BASE-TX Fast Ethernet ports, all of which support PoE, and the
BES50FE-24T PWR offers 24 full-duplex 10/100BASE-TX Fast Ethernet
ports, 12 of which support PoE.
•
BES50GE: The BES50GE-12T PWR offers 12 full-duplex
10/100/1000BASE-T Gigabit Ethernet ports, all of which support PoE,
and the BES50FE-24T PWR offers 24 full-duplex 10/100/1000BASE-T
Gig Ethernet ports, 12 of which support PoE.
•
Maximum power on any port is 15.4 Watts.
BES50 series switches are equipped with a dynamic host configuration
protocol (DHCP) client (configurable to BOOTP server or static IP address)
and support a Web management interface compatible with the Element
Manager (BEM).
BES100/200 series
The BES100/200 series is a family of 1U rack-mountable Ethernet switches
capable of supporting wire-speed connections on 24 or 48 Fast Ethernet
ports. These products can be either rack-mounted or physically stacked
on a bench.
• BES110 (previously available in SMB portfolio release 1.0): The
BES110-24T offers 24 unpowered Fast Ethernet ports and the
BES110-48T offers 24 unpowered Fast Ethernet ports.
•
BES120 (previously available in SMB portfolio release 1.0): The
BES120-24T PWR offers 12 of 24 Fast Ethernet ports as powered ports
and the BES120-48T offers 24 of 48 Fast Ethernet ports as powered
ports.
•
BES210: The BES210-24T offers 24 unpowered Fast Ethernet ports
and the BES210-48T offers 48 unpowered Fast Ethernet ports.
•
BES220: The BES220-24T offers 12 of 24 Fast Ethernet ports as
powered ports and the BES220-48T offers 24 of 48 Fast Ethernet ports
as powered ports.
• Maximum power on any port is 15.4 Watts.
•
All BES100/200 series switches are equipped with two 10/100/1000
Mb/s copper ports, a serial port, and SNMP and Web management
interfaces compatible with both the BEM and a simple Web browser.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
Existing products 15
•
Up to four BES200 Series switches can be connected together using
stacking ports and accessed through a single Web user interface screen.
BOOTP is invoked at startup to obtain an IP address for the management
interface as the switches are not equipped with a host DHCP client. If the
solution provider wants to configure the management interface IP address
manually, they can power the BES without a DHCP/BOOTP server present
and browse to the factory default address for the management interface.
BES1000 series
The BES1000 series is a family of 1U rack-mountable Ethernet switches
supporting autosensing ports and small form factor pluggable (SFP) shared
gigabit interface converter (GBIC) slots.
•
BES1010: The BES1010-24T offers 24 10/100/1000 Mb/s autosensing
ports, including two shared SFP ports, and the BES1010-48T offers 48
10/100/1000 Mb/s autosensing ports, including two shared SFP ports.
•
BES1020: The BES 1020-24T PWR offers 24 10/100/1000 Mb/s
autosensing ports of which 12 are PoE ports, including two shared
SFP ports, and the BES 1020-48T PWR offers 48 10/100/1000 Mb/s
autosensing ports of which 24 are PoE ports, including two shared
SFP ports.
•
Maximum power on any port is 15.4 Watts.
•
All BES1000 series switches are equipped with a serial port and SNMP
and Web management interfaces compatible with both the BEM and a
simple Web browser.
BOOTP is invoked at startup to obtain an IP address for the management
interface as the switches are not equipped with a DHCP client. If the
solution provider wants to configure the management interface IP address
manually, they can power the BES without a DHCP/BOOTP server present
and browse to the factory default address for the management interface.
Existing products
The following existing Nortel products integrate with new SMB portfolio
release 2.0 products.
SMB Portfolio 1.0 products
Model number
Order code
Description
Element Manager
BEM1.0 NT5S80AA Element Manager
Wireless LAN
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
16 Getting started
Model number
Order code
Description
BAP120 NT5S40CAE6 802.11a/b/g Indoor Access Point (AP)
with Bridging and Repeater Modes (PoE)
Secure Router
BSR222 NT5S20AAE6 Secure Broadband Router
Ethernet Switching
BES110-24T NT5S01AEE5 24 Port 10/100 Rack Mount Switch
BES110-48T NT5S01BEE5 48 Port 10/100 Rack Mount Switch
BES120-24T-PWR NT5S01MEE5 24 Port 10/100 Rack Mount Switch with
PoE
BES120-48T-PWR NT5S01NEE5 48 Port 10/100 Rack Mount Switch with
PoE
Accessories
Optional power supplies and cords
Optional Antennas for BAP120
Other Nortel products
Business Communications Manager
Description
BCM50 release 1.0
BCM50 Expansion and Media Bay Modules
BCM400 release 4.0
BCM200 release 4.0
BCM200/400 Expansion and Media Bay
Modules
Landline IP telephones Description
IP Phone 1120E Supported by BCM software release 4 and
BCM50 2.0
IP Phone 1140E Supported by BCM software release 4 and
BCM50 2.0
IP Phone 2001 3 x 24 character display, PoE
IP Phone 2002 4 x 24 character display, PoE
IP Phone 2004 8 x 24 character display, PoE
IP Audio Conference Phone 2033 Supported by BCM 4.0 and BCM50 2.0
Soft clients
Description
IP Softphone 2050 Windows Soft Client
Mobile Voice Client 2050 Pocket PC Soft Client
VPN Client Windows Soft Client
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
Existing products 17
Accessories Description
Mobile USB Headset Adaptor for IP soft phones For soft clients
IP Phone Key Expansion Module For 2000 series telephones
Business Element Manager
The Business Element Manager is a Windows application that integrates
a Windows-like navigation panel with a simple network management
protocol (SNMP)-based discovery mechanism and various means of
product configuration depending on what features are supported by the
target product.
The Element Manager enables streamlined access to BES devices,
BAP120, and the BSR222 Web management screens. It also enables the
BES series management interface to support and access active content
such as port statistics measurement. These interfaces appear in the
Element Manager client window when you double-click the respective
devices from the Element Manager navigation panel.
A Web management interface also exists for the BCM50 and BCM200/400,
making seamless management of a converged SMB network possible.
Element Manager software can reside on any local area network
(LAN)-connected PC and be launched when required. Alternatively, a
remote PC running the Element Manager client located anywhere on the
Internet can securely manage devices on a target LAN through the BSR222
and VPN soft client.
The Element Manager is not required to manage individual products. You
can manage each product independently through its Web management
interface. The Element Manager simplifies access to multiple products and
enables active content where available.
Business Access Point 120 (BAP120)
The BAP120 is an IEEE 802.11a, 802.11b/g-compatible product that
provides transparent, wireless high-speed data communications between
the wired LAN and fixed or mobile devices equipped with either an 802.11a
or 802.11 b/g wireless adapter, or both. Any number of BAP120 products
can operate together in a network. This product can sit on a desktop or
mount inconspicuously on a wall or ceiling. The BAP120 is equipped with
a serial port, SNMP, and Web management interfaces compatible with the
Element Manager.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
18 Getting started
Business Secure Router 222 (BSR222)
The BSR222 is a two-port router with a Cat5 wide area network (WAN)
connection and four 10/100 Mb/s LAN ports. It has roughly one-fourth the
footprint of a BCM50 and is powered by a local power adaptor through a
barrel plug. The router provides WAN connectivity to one or more Ethernet
switches and to the necessary client and branch tunnels to enable secure
remote access. The BSR222 is equipped with a serial port, SNMP, and Web
management interfaces compatible with the Element Manager.
Reference topologies and assumptions
This section outlines the assumptions for the reference topologies described
in this guide.
Small and medium-sized businesses typically use a third-party cable or
asymmetric digital subscriber line (ADSL) modem for high-speed Internet
access. The ISP must be able to provide a single static IP address to each
site. The BSR222 uses network address translation (NAT) to a private
IP address space and provides a firewall between the resultant private
LAN and the Internet. An internal DHCP server faces the private LAN.
All connected network equipment (BCM, BAP120, and BES) obtains the
associated IP address using DHCP from the router DHCP server.
Personal computers (PC), personal digital assistants (PDA), laptops, and
Nortel IP phones obtain private IP addresses from the same DHCP server.
Voice support is provided with Nortel IP phones, Voice Soft-Clients, and the
BCM communications server. IP phones receive IP addresses from the
BSR222. However, in a topology where a third-party router is present, IP
phones receive IP addresses from the BCM.
Nortel IP phones and soft phones run a proprietary stimulus protocol that
is terminated at the BCM. The BCM presents H.323 trunks to other sites
encapsulated inside VPN branch tunnels that are established between
pairs of sites. The BCM also mediates control and voice flows destined
for the local public switched telephone network (PSTN). A Nortel 2050
Voice Soft-Client runs on an IEEE 802.11e EDCA WMM-compatible
notebook computer or PDA connected by a wireless local area network
(WLAN) (BAP120). A second voice soft client (the Nortel MVC 2050)
tailored for a PDA also connects through a standard 802.11b WLAN. The
BAP120 supports IEEE 802.11e Quality of Service (QoS) tagging (for
example, EDCA/WMM interim QoS for multimedia) and traffic segregation
(SSID-to-VLAN mapping) for enhanced voice quality and security. Roaming,
such as handoff of data connections between access points, is supported.
The BSR222 performs secure routing functions and supports a combination
of 10 client and branch tunnels. The BCM50, Business Ethernet Switches,
BAP120, and BSR222 are all manageable using the Element Manager
application.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
IP addressing for SMB devices and DHCP 19
All reference topologies assume that each device on the subnet has its
SNMP client enabled.
IP addressing for SMB devices and DHCP
Nortel recommends using DHCP to obtain IP addresses for SMB devices
and end nodes (such as PCs and IP phones).
The SMB reference topologies 2 and 3 rely on a DHCP server running on
the BSR222 in the subnet (typically occupying address 192.168.1.1). SMB
referencetopology 1 relies on a DHCP serverrunning on a third-party router.
DHCP serves IP addresses dynamically to all devices and end nodes
connected to the subnet. As devices are connected to the subnet, they
take IP addresses from the DHCP pool from 192.168.1.2 to 192.168.1.127
inclusive.
If DHCP is not running on the subnet, all SMB devices are shipped with
factory-default IP addresses that exist within ranges of the subnet that
minimize IP address conflict.
The following table lists the default IP addresses, valid IP ranges, and
default DHCP status for all SMB devices.
IP addressing for SMB devices and DHCP
Device
type
Default IP
address
IP address
range
DHCP/BOOTP
Notes
BSR222
192.168.1.1
None DHCP server
enabled.
IP address
pool starting
address =
192.168.1.2,
poolsize=126.
This is
the default
gateway.
This is
the DHCP
server.
Pool size is
currently set
at 126.
BCM50 1.0
192.168.1.2
None DHCP client
enabled
Only one
BCM50 rec
ommended
in an SMB
network.
BCM50 2.0
192.168.1.2
None DHCP client
enabled
Only one
BCM50 rec
ommended
in an SMB
network.
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
20 Getting started
Device
type
Default IP
address
IP address
range
DHCP/BOOTP
Notes
BCM 4.0
192.168.1.2
None DHCP client
enabled
Only one
BCM50 rec
ommended
in an SMB
network.
BES50
192.168.1.12
8
None DHCP client
enabled
Also suppo
rts BOOTP
and static IP
addressing.
BES100/2
00
192.168.1.13
2
BES1000
192.168.1.13
2
192.168.1.1
32
through
192.168.1.1
35
BOOTP mode
set to BOOTP
or default
IP (BOOTP
timeout is set
at 60 seconds)
If DHCP is
not used
and more
than one
BES device
is deployed,
you must
manually
configure
the addre
sses to be
consecutive
within this
range.
BAP120
192.168.1.136192.168.1.1
36 through
192.168.1.1
51
DHCP client
enabled
If DHCP is
not used
and more
than one
BAP120 is
deployed,
you must
manually
configure
the addre
sses to be
consecutive
within this
range.
IP Phones
192.168.1.152192.168.1.1
52 through
192.168.1.2
54
DHCP client
enabled
If DHCP is
not used
and more
than one
IP Phone
is deployed,
you must
manually
configure
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
Installing the Element Manager 21
Device
type
Default IP
address
IP address
range
DHCP/BOOTP
Notes
the addre
sses to be
consecutive
within this
range.
Installing the Element Manager
The Element Manager 1.0 supports all SMB data products (BSR222,
BES50/100/200/1000, and BAP120) as well as BCM50 1.0 and 2.0, and
BCM 4.0. However, the BCM Element Manager does not support SMB
devices.
ATTENTION
The Element Manager 1.0 must be installed on your computer if you want to
manage both SMB data products and existing BCM devices.
Prerequisites
The following items are required beforeyou can install the Element Manager.
•
System requirements:
— Windows: Windows 98 SE™, Windows 2000™, Windows XP™
— RAM: minimum 256 MB, recommended 512 MB
— Free space: 150 MB
•
Element Manager software downloaded from
www.nortel.com/support.
Procedure steps
Step Action
1
Double-click the Element Manager Installer icon and click Run.
2
In the Install Wizard
a. Read through the Introduction page and click Next.
b. Read through the License Agreement page and click Next.
c. Choose the install folder and click Next.
d. Click On the Desktop to choose the shortcut folder.
e. Review the Pre-Installation Summary and click Install.
—End—
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
22 Getting started
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
Loading...