Nortel BCM200, BCM400 User Manual

BCM200/400 4.0 Installation and
Maintenance Guide

BCM 4.0

Business Communications Manager

Document Status: Standard
Document Version: 02.6
Part Code: N0060612

Date:

October 2008

4

Copyright © 2006–2008 Nortel Networks. All Rights Reserved.

The information in this document is subject to change without notice. The statements, configurations, technical data, and
recommendations in this document are believed to be accurate and reliable, but are presented without express or implied
warranty. Users must take full responsibility for their applications of any products specified in this document. The
information in this document is proprietary to Nortel Networks.

Trademarks

Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks.
Microsoft, MS, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property of their respective owners.

SOFTWARE LICENSE

NORTEL NETWORKS INC. (“NORTEL NETWORKS”) TELECOMMUNICATION PRODUCTS

THIS LEGAL DOCUMENT IS A LICENSE AGREEMENT ("License") BETWEEN YOU, THE END-USER
("CUSTOMER") AND NORTEL NETWORKS. PLEASE READ THIS LICENSE CAREFULLY BEFORE USING
THE SOFTWARE. BY USING THIS SOFTWARE, YOU, THE CUSTOMER, ARE AGREEING TO BE BOUND BY
THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE, RETURN THE
UNUSED SOFTWARE AND THE ASSOCIATED DOCUMENTATION TO NORTEL NETWORKS THROUGH A
NORTEL NETWORKS AUTHORIZED DISTRIBUTOR WITHIN FIVE (5) DAYS OF YOUR ACQUISITION OF
THE SOFTWARE FOR A REFUND.

3

Subject to the terms hereinafter set forth, NORTEL NETWORKS grants
to CUSTOMER and/or its representatives, with a "need to know," a
personal, non-exclusive license (1) to use the licensed software,
proprietary to NORTEL NETWORKS or its suppliers and (2) to use the
associated documentation. CUSTOMER is granted no title or ownership
rights, in or to the licensed software, in whole or in part, and CUSTOMER
acknowledges that title to and all copyrights, patents, trade secrets and/or
any other intellectual property rights to and in all such licensed software
and associated documentation are and shall remain the property of
NORTEL NETWORKS and/or NORTEL NETWORKS’ suppliers. The
right to use licensed software may be restricted by a measure of usage of
applications based upon number of lines, number of ports, number of
terminal numbers assigned, number of users, or some similar measure.
Expansion beyond the specified usage level may require payment of an
incremental charge or another license fee.

NORTEL NETWORKS considers the licensed software to contain "trade
secrets" of NORTEL NETWORKS and/or its suppliers. Such "trade
secrets" include, without limitation thereto, the specific design, structure
and logic of individual licensed software programs, their interactions with
other portions of licensed software, both internal and external, and the
programming techniques employed therein. In order to maintain the "trade
secret" status of the information contained within the licensed software,
the licensed software is being delivered to CUSTOMER in object code
form only.

NORTEL NETWORKS or any of its suppliers holding any intellectual
property rights in any licensed software, and/or any third party owning
any intellectual property rights in software from which the licensed
software was derived, are intended third party beneficiaries of the License.
All grants of rights to use intellectual property intended to be
accomplished by this License are explicitly stated. No other grants of such
rights shall be inferred or shall arise by implication.

CUSTOMER warrants to NORTEL NETWORKS that CUSTOMER is
not purchasing the rights granted by this License in anticipation of
reselling those rights.

CUSTOMER shall:

• Hold the licensed software in confidence for the benefit of NORTEL
NETWORKS and/or NORTEL NETWORKS’ suppliers using no
less a degree of care than it uses to protect its own most confidential
and valuable information; and

• Keep a current record of the location of each copy of licensed
software made by it; and

• Affix to each copy of licensed software made by it, in the same form
and location, a reproduction of the copyright notices, trademarks, and
all other proprietary legends and/or logos of NORTEL NETWORKS
and/or NORTEL NETWORKS’ suppliers, appearing on the original
copy of such licensed software delivered to CUSTOMER; and retain
the same without alteration on all original copies; and

• Issue instructions to each of its authorized employees, agents and/or
representatives to whom licensed software is disclosed, advising
them of the confidential nature of such licensed software and to
provide them with a summary of the requirements of this License; and

• Return the licensed software and all copies through an Authorized
Distributor to NORTEL NETWORKS at such time as the
CUSTOMER chooses to permanently cease using it.

CUSTOMER shall not:

• Use licensed software (i) for any purpose other than CUSTOMER’s
own internal business purposes and (ii) other than as provided by this
License; or

• Allow anyone other than CUSTOMER’s employees, agents and/or
representatives with a "need to know" to have physical access to
licensed software; or

• Make any copies of licensed software except such limited number of
object code copies in machine readable form only, as may be
reasonably necessary for execution or archival purposes only; or

• Make any modifications, enhancements, adaptations, or translations
to or of licensed software, except as may result from those
CUSTOMER interactions with the licensed software associated with
normal use and explained in the associated documentation; or

• Attempt to reverse engineer, disassemble, reverse translate,
decompile, or in any other manner decode licensed software, in order
to derive the source code form or for any other reason; or

• Make full or partial copies of any documentation or other similar
printed or machine-readable matter provided with licensed software
unless the same has been supplied in a form by NORTEL
NETWORKS intended for periodic reproduction of partial copies; or

• Export or re-export licensed software and/or associated
documentation by downloading or otherwise from the fifty states of
the United States and the District of Columbia.

• Install and use each copy of licensed software only on a single CPU
at a time (for this purpose, single CPU shall include systems with
redundant processing units); and

PLEASE REFER TO THE NEXT PAGE

BCM200/400 4.0 Installation and Maintenance Guide

4

Except for Java Product (as defined herein below), CUSTOMER may
assign collectively its rights under this License to any subsequent owner
of the associated hardware, but not otherwise, subject to the payment of
the then current license fee for new users, if any. No such assignment shall
be valid until CUSOMTER (1) has delegated all of its obligations under
this License to the assignee; and (2) has obtained from the assignee an
unconditional written assumption of all such obligations; and (3) has
provided NORTEL NETWORKS a copy of such assignment, delegation
and assumption; and (4) has transferred physical possession of all licensed
software and all associated documentation to the assignee and destroyed
all archival copies. Except as provided, neither this License nor any rights
acquired by CUSTOMER through this License are assignable. Any
attempted assignment of rights and/or transfer of licensed software not
specifically allowed shall be void and conclusively presumed a material
breach of this License.

If NORTEL NETWORKS (i) claims a material breach of this License, and
(ii) provides written notice of such claimed material breach to
CUSTOMER and (iii) observes that such claimed material breach remains
uncorrected and/or unmitigated more than thirty (30) days following
CUSTOMER’s receipt of written notice specifying in reasonable detail
the nature of the claimed material breach, then CUSTOMER
acknowledges that this License may be immediately terminated by
NORTEL NETWORKS and CUSTOMER further acknowledges that any
such termination shall be without prejudice to any other rights and
remedies that NORTEL NETWORKS may have at law or in equity.

EXPRESS LIMITED WARRANTIES FOR ANY ITEM OF LICENSED
SOFTWARE, IF ANY, WILL BE SOLELY THOSE GRANTED
DIRECTLY TO CUSTOMER BY DISTRIBUTOR. OTHER THAN AS
SET FORTH THEREIN, THIS LICENSE DOES NOT CONFER ANY
WARRANTY TO CUSTOMER FROM OR BY NORTEL NETWORKS.

The rights and obligations arising under this License shall be construed in
accordance with the laws of the State of Tennessee. If for any reason a
court of competent jurisdiction finds any provision of this License or
portion thereof to be unenforceable, that provision of the License shall be
enforced to the maximum extent permissible so as to effect the intent of
the parties and the remainder of this License shall continue in full force
and effect.

This License constitutes the entire agreement between the parties with
respect to the use of the licensed software and the associated
documentation, and supersedes all prior or contemporaneous
understandings or agreements, written or oral, regarding such subject
matter. No amendment to or modification of this License will be binding
unless in writing and signed by a duly authorized representative of
NORTEL NETWORKS.

THE LICENSED SOFTWARE IS PROVIDED BY NORTEL
NETWORKS "AS IS" AND WITHOUT WARRANTY OF ANY KIND
OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED,
INCLUDING (WITHOUT LIMITATION) THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE.

THIS LIMITATION OF WARRNATIES WAS A MATERIAL
FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE
CHARGED FOR EACH SPECIFIC ITEM OF SOFTWARE
LICENSED.

IN NO EVENT WILL NORTEL NETWORKS AND/OR NORTEL
NETWORKS’ SUPPLIERS AND THEIR DIRECTORS, OFFICERS,
EMPLOYEES OR AGENTS BE LIABLE TO OR THROUGH
CUSTOMER FOR INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF
ANY KIND, INCLUDING LOST PROFITS, LOSS OF BUSINESS OR
BUSINESS INFORMATION, BUSINESS INTERRUPTION, OR
OTHER ECONOMIC DAMAGE, AND FURTHER INCLUDING
INJURY TO PROPERTY, AS A RESULT OF USE OR INABILITY TO
USE THE LICENSED SOFTWARE OR BREACH OF ANY
WARRANTY OR OTHER TERM OF THIS LICENSE, REGARDLESS
OF WHETHER NORTEL NETWORKS AND/OR NORTEL
NETWORKS’ SUPPLIERS WERE ADVISED, HAD OTHER REASON
TO KNOW, OR IN FACT KNEW OF THE POSSIBILITY THEREOF.

Restricted Rights. Use, duplication or disclosure by the United States
government is subject to the restrictions as set forth in the Right in
Technical Data and Computer Software Clauses in DFARS

252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2) as applicable.

N0060612

Task List

Regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Introducing the BCM hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Viewing the BCM system LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Installation overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Checking the installation prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Installing the BCM main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

To attach the rack-mount brackets ................................................................................95

To mount the main unit in an equipment rack ...............................................................96

To install the main unit on the wall ................................................................................98

To install the BCM main unit on a table or shelf ..........................................................101

Task List 5

Installing an expansion unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

To connect the expansion unit to the main unit ...........................................................106

Installing a media bay module (MBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

To select trunk MBMs..................................................................................................108

To select station MBMs ...............................................................................................110

To determine bus requirements...................................................................................115

To determine MBM DIP switch settings.......................................................................118

To set MBM DIP switches ...........................................................................................123

To install an MBM in the BCM main unit or expansion unit .........................................143

Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

To connect power and wiring.......................................................................................146

To check system power and status .............................................................................147

To connect DTM, CTM, CTM8, BRIM S/T, or 4x16 MBMs..........................................150

To connect the GATM, G4x16, or G8x16 ....................................................................151

To connect the DSM16+, DSM32+, ASM8, GASM8, 8x16, or 4x16 MBMs ................153

To connect the fiber cables .........................................................................................156

To connect the BCM system to the WAN ....................................................................166

To connect the modem ................................................................................................166

Installing telephones and peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

To install the emergency telephone.............................................................................173

Installing the analog terminal adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

To connect the ATA2 ...................................................................................................177

To mount the ATA2 on a wall ......................................................................................178

To measure the insertion loss from the CO to the analog device................................179

To measure the insertion loss from the analog device to the CO................................179

BCM200/400 4.0 Installation and Maintenance Guide

6 Task List

Installing optional telephony equipment . . . . . . . . . . . . . . . . . . . . . . . . . 181

To install an auxiliary ringer.........................................................................................181

To install an external paging system ...........................................................................182

To connect an external music source ..........................................................................184

Initializing the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

To connect the Ethernet crossover cable ....................................................................186

To configure your computer ........................................................................................187

To display the configuration menus.............................................................................188

Configuring the BCM system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Using Telset Administration to set the basic parameters . . . . . . . . . . . . 195

To enter the keycodes .................................................................................................196

To configure the IP address ........................................................................................196

To configure the modem..............................................................................................197

To select the region .....................................................................................................197

To select the telephony startup template and start DN ...............................................198

To initialize voice mail..................................................................................................198

To create Telset user accounts ...................................................................................198

Using Element Manager to set the basic parameters . . . . . . . . . . . . . . . 201

To access the BCM web page.....................................................................................202

To download and install BCM Element Manager ........................................................202

To connect to the BCM system ...................................................................................203

To enter a keycode ......................................................................................................203

To configure the LAN IP address ................................................................................204

To configure the modem..............................................................................................204

To configure the startup template for telephony services ...........................................205

To initialize voice mail..................................................................................................205

To enter a name for your system.................................................................................206

To configure the date and time settings ......................................................................206

To configure DHCP server settings .............................................................................207

To configure IP Phones ...............................................................................................208

To configure SNMP settings ........................................................................................209

To configure SNMP community strings .......................................................................210

To configure the SNMP manager list...........................................................................210

To create user accounts ..............................................................................................211

Using the Startup Profile to configure parameters . . . . . . . . . . . . . . . . . 213

To download the Startup Profile template ...................................................................214

To customize a Startup Profile for your system .........................................................215

To load the Startup Profile data onto the BCM system ...............................................216

Completing the initial installation (optional) . . . . . . . . . . . . . . . . . . . . . . 219

To configure the MBM .................................................................................................220

System monitoring and troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 223

To view the system LEDs with Element Manager .......................................................225

To resolve an alarm condition .....................................................................................225

To monitor hard disk status .........................................................................................227

N0060612N0060612

Task List 7

To determine RAID status ...........................................................................................228

To access disk mirroring..............................................................................................231

To monitor RAID disk mirror operational status...........................................................233

To access the RAID status report................................................................................233

To monitor disk mirroring .............................................................................................234

To troubleshoot the emergency telephone on the system...........................................235

To troubleshoot the emergency telephone connected to a CTM.................................235

To troubleshoot the ATA2............................................................................................235

To check the ATA 2 wiring...........................................................................................236

To check for dial tone at the ATA 2 .............................................................................236

To check for trunk line dial tone to the ATA 2..............................................................236

Preparing hardware for maintenance or upgrades . . . . . . . . . . . . . . . . . 237

To shut down the system software ..............................................................................239

To shut down the system hardware ............................................................................240

To restore the system to operation..............................................................................240

To remove the base function tray ................................................................................243

To install the base function tray ...................................................................................244

To remove the base function tray bezel ......................................................................245

To install the base function tray bezel .........................................................................246

To remove the advanced function tray ........................................................................249

To install the advanced function tray ...........................................................................251

To remove the main unit top cover ..............................................................................253

To install the main unit top cover .................................................................................254

Replacing a media bay module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

To remove an MBM .....................................................................................................258

To install an MBM........................................................................................................260

Replacing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

To install a RAID system .............................................................................................263

To replace a RAID configuration hard disk..................................................................265

To remove a hard disk cage from a BCM200 main unit ..............................................267

To remove a hard disk cage from a BCM400 main unit ..............................................268

To install a hard disk cage...........................................................................................270

To install a hard disk cage...........................................................................................271

To remove a hard disk from a standard configuration hard disk cage.........................274

To remove a primary hard disk from a RAID hard disk cage.......................................275

To remove a mirror hard disk from a RAID hard disk cage .........................................276

To install a hard disk into a standard configuration hard disk cage.............................277

To install a primary hard disk into a RAID hard disk cage ...........................................278

To install a mirror hard disk into a RAID hard disk cage .............................................280

To initialize the hard disk in a single disk configuration ...............................................281

Replacing or upgrading a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 283

To remove the BCM200 power supply ........................................................................284

To install a BCM200 standard power supply ...............................................................286

To remove a BCM400 standard power supply ............................................................290

To install a BCM400 standard power supply ...............................................................292

To remove the PSU status connector jumper..............................................................296

To install a redundant power supply cage (BCM400 only) ..........................................297

To remove a BCM400 redundant power supply cage .................................................301

BCM200/400 4.0 Installation and Maintenance Guide

8 Task List

To install a power supply module ................................................................................303

To remove a power supply module .............................................................................305

Replacing data cards and processing hardware . . . . . . . . . . . . . . . . . . . 307

To remove the WAN card ............................................................................................309

To install a replacement WAN card .............................................................................311

To remove the media services card (MSC) .................................................................312

To install the media services card (MSC) .................................................................314

To remove the modem card .......................................................................................315

To install a modem card ..............................................................................................317

To remove the processor expansion card (PEC) .......................................................321

To install a PEC...........................................................................................................323

To remove a DIMM card ..............................................................................................325

To install a DIMM card.................................................................................................326

To remove the clock/calendar battery .........................................................................327

To install a new clock/calendar battery........................................................................329

Replacing or installing a cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

To remove a BCM400 cooling fan ...............................................................................332

To install a BCM400 cooling fan ..................................................................................334

To remove a BCM200 cooling fan ...............................................................................337

To install a BCM200 cooling fan ..................................................................................339

To remove an expansion unit fan ................................................................................340

To install an expansion unit fan ...................................................................................342

4x16 wiring charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

ADID wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347

BRIM wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349

ASM8, ASM8+, and GASM8 wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . 351

DSM16 and DSM32 wiring charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353

DTM wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355

GATM wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

Market profile attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361

N0060612N0060612

Contents

Regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

North American regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Federal Communications Commission (FCC) Notice . . . . . . . . . . . . . . . . . . . . . . 20

Ringer Equivalence Number (REN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

EMI/EMC (FCC Part 15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Enhanced 911 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Radio-frequency interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Telecommunication registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

International regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Additional safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ITU standardization compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Contents 9

Chapter 1

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Symbols and conventions used in this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

How to get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 2

Introducing the BCM hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Main units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

BCM200 main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

BCM400 main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

BCM400 advanced function tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

BCM400 advanced function tray RAID Status LEDs . . . . . . . . . . . . . . . . . . . . . . 40

Base function tray component hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Base function tray faceplate components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Base function tray internal components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Main card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Data networking components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

I/O interface card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

BCM expansion unit (BCM400 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

BCM200/400 4.0 Installation and Maintenance Guide

10 Contents

MBM bays and backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Media bay modules (MBMs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Trunk media bay modules (MBMs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Station media bay modules (MBMs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Specialized media bay modules (MBMs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

BCM400 expansion gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

BCM components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

BCM power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

BCM400 redundant power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Power supply adapter cord (international users) . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Uninterruptable power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

RAID upgrade kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Field replaceable units (FRU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Telephones and adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chapter 3

Viewing the BCM system LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Base function tray system status display LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Media bay module LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

DTM LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

BRIM LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Chapter 4

Installation overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 5

Checking the installation prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

General requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Site telephony wiring requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Digital loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Analog loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

System equipment, supplies, and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Basic hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Optional equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Other hardware and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Chapter 6

Installing the BCM main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Unpacking the main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

N0060612N0060612

Contents 11

Installing the main unit in an equipment rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Installing the main unit on the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Installing the main unit on a flat surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Chapter 7

Installing an expansion unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Unpacking the expansion unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Installing the expansion unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Connecting the BCM expansion unit to the BCM main unit . . . . . . . . . . . . . . . . . . . . 105

Chapter 8

Installing a media bay module (MBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Selecting MBMs for your BCM system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Selecting trunk MBMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Selecting station MBMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Selecting a fiber expansion module (FEM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Determining system capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Understanding DS30 numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Setting offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Determining bus requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Assigning DS30 resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Choosing the assigned order for MBMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Determining MBM DIP switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Setting MBM DIP switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Assigning line and extension numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

DTM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

DDIM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

BRI switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

CTM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

GATM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

4x16 switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

G4X16 switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

G8X16 switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

ASM 8 and GASM8 switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

DSM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

FEM switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

BCM400 expansion gateway MBMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Installing an MBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Chapter 9

Connecting the cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Connecting power to the BCM system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Checking system power and status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

BCM200/400 4.0 Installation and Maintenance Guide

12 Contents

Wiring the MBMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Connect the MBMs to service providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Wiring MBMs to internal connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Wiring the FEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Setting DNs and port numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

MBM combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Combining CTM/GATMs, 8x16s, and 4x16s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Fully-loaded setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

DECT combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

Changing configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

System setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

Connecting the data networking hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Connecting the cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Installing the cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Chapter 10

Installing telephones and peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

System telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Analog terminal adapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Central Answering Position (CAP/eCAP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Telephone port and DN cross-reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Installing an emergency telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Installing IP Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Installing the mobility systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Installing T7406 cordless systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Moving telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

Chapter 11

Installing the analog terminal adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Configuration overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Installing the ATA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Configuring the ATA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Chapter 12

Installing optional telephony equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Installing an auxiliary ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Connecting the external paging system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

N0060612N0060612

Analog telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Analog data device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Connecting the ATA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Mounting the ATA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

Test insertion loss measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Activating auxiliary ringer programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

Contents 13

Connecting an external music source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Music-on-hold specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Chapter 13

Initializing the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Data parameter requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Using the default BCM system IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Using the Ethernet crossover cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Setting the crossover connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Connecting through Ethernet crossover cable . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Connecting through the serial port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Null modem cable setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

Software keycode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Regenerating a keycode after system replacement . . . . . . . . . . . . . . . . . . . . . . 190

Chapter 14

Configuring the BCM system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Initial parameters overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Startup parameters overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Chapter 15

Using Telset Administration to set the basic parameters . . . . . . . . . . . . 195

Configuring the initial parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

Chapter 16

Using Element Manager to set the basic parameters. . . . . . . . . . . . . . . . 201

Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Accessing the BCM system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Configuring the initial parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Configuring the startup parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

Chapter 17

Using the Startup Profile to configure parameters. . . . . . . . . . . . . . . . . . 213

Startup Profile requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

Configuring basic parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Startup Profile times and LED sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Chapter 18

Completing the initial installation (optional) . . . . . . . . . . . . . . . . . . . . . . . 219

Configuring the media bay module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

Configuring modem settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Checking for software updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Configuring voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

BCM200/400 4.0 Installation and Maintenance Guide

14 Contents

Customizing security policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Performing a backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222

Chapter 19

System monitoring and troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 223

System status display LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

Resolving alarm conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Monitoring media bay module LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

Monitoring standard configuration hard disk status using Element Manager . . . 227

Monitoring the RAID LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

RAID disk mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

Monitoring or configuring disk mirror settings using Element Manager . . . . . . . . . . . 230

Accessing disk mirroring through Element Manager . . . . . . . . . . . . . . . . . . . . . . 231

Monitoring RAID disk mirror operational status using Element Manager . . . . . . 232

Accessing the RAID status report using Element Manager . . . . . . . . . . . . . . . . 233

Monitoring disk mirroring using Element Manager . . . . . . . . . . . . . . . . . . . . . . . 234

BCM system does not function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Emergency telephone does not function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

ATA2 does not function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Chapter 20

Preparing hardware for maintenance or upgrades. . . . . . . . . . . . . . . . . . 237

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Performing a system shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Restarting the system after maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Base function tray maintenance procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Removing the base function tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242

Advanced function tray maintenance procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

Removing and installing the main unit top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Removing the main unit top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Installing the main unit top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254

Using the backup and restore utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256

Chapter 21

Replacing a media bay module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

Removing an MBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

Installing an MBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260

Returning the system to operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260

Chapter 22

Replacing the hard disk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Installing a RAID system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

N0060612N0060612

Contents 15

Replacing a RAID configuration hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Removing a hard disk cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Removing a hard disk cage from a BCM200 main unit . . . . . . . . . . . . . . . . . . . . 266

Removing a hard disk cage from a BCM400 advanced function tray . . . . . . . . . 268

Installing a hard disk cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Installing a hard disk cage in a BCM200 main unit . . . . . . . . . . . . . . . . . . . . . . . 270

Installing a hard disk cage in a BCM400 main unit . . . . . . . . . . . . . . . . . . . . . . . 271

Replacing a hard disk in the hard disk cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

Removing a hard disk from a standard configuration hard disk cage . . . . . . . . . 273

Removing a primary hard disk from a RAID hard disk cage . . . . . . . . . . . . . . . . 274

Removing a mirror hard disk from a RAID hard disk cage . . . . . . . . . . . . . . . . . 275

Installing a hard disk into a standard configuration hard disk cage . . . . . . . . . . . 276

Installing a primary hard disk into a RAID hard disk cage . . . . . . . . . . . . . . . . . . 277

Installing a mirror hard disk into a RAID hard disk cage . . . . . . . . . . . . . . . . . . . 279

Initializing the hard disk in a single-disk configuration . . . . . . . . . . . . . . . . . . . . . . . . 281

Initializing the hard disk in a RAID configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

Chapter 23

Replacing or upgrading a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 283

Replacing a standard power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

Removing a BCM200 power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

Installing a BCM200 standard power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286

Removing a BCM400 standard power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

Installing a BCM400 standard power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292

Upgrading to a redundant power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294

Removing the PSU status connector jumper . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

Installing a redundant power supply cage (BCM400 only) . . . . . . . . . . . . . . . . . 296

Removing a BCM400 redundant power supply cage . . . . . . . . . . . . . . . . . . . . . 301

Installing a power supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

Removing a power supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

Chapter 24

Replacing data cards and processing hardware . . . . . . . . . . . . . . . . . . . 307

Replacing cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307

Installing the WAN card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310

Installing the modem card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317

Replacing the processor expansion card (PEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319

Installing a processor expansion card (PEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . 322

Replacing memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323

Increasing the amount of memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

Removing the dual in-line memory module (DIMM) card . . . . . . . . . . . . . . . . . . 324

Replacing the clock/calendar battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326

BCM200/400 4.0 Installation and Maintenance Guide

16 Contents

Chapter 25

Replacing or installing a cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

Replacing a cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

Removing a BCM400 cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332

Installing a BCM400 cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334

Removing a BCM200 cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337

Installing the BCM200 cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339

Removing an expansion unit fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340

Installing an expansion unit fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342

Troubleshooting cooling fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342

Appendix A

4x16 wiring charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

Appendix B

ADID wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347

Appendix C

BRIM wiring chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349

Appendix D

ASM8, ASM8+, and GASM8 wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . 351

Appendix E

DSM16 and DSM32 wiring charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353

Appendix F

DTM wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355

Appendix G

GATM wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

Appendix H

Market profile attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361

Media bay module availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361

FEM MBM–Norstar trunk cartridge combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . 362

Time zones and language information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363

Time and date format based on language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363

Language support for South America and Central America . . . . . . . . . . . . . . . . 364

Caller ID display formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365

Core parameters for market profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365

Global analog trunk parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378

GASM8 parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381

ISDN line services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384

Analog and digital trunk types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385

N0060612N0060612

Contents 17

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387

BCM200/400 4.0 Installation and Maintenance Guide

18 Contents

N0060612N0060612

Regulatory information

Refer to the following sections for regulatory information on the BCM system:

• “North American regulatory information”

• “International regulatory information” on page 24

North American regulatory information

This Class A device complies with Part 68 & Part 15 of the FCC Rules and ICES-003 Class A
Canadian EMI requirements. Operation is subject to the following two conditions (1) This device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect
the equipment. Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.

19

Caution: Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or electrician, as
appropriate.

Do not attempt to repair this equipment. If you experience trouble, write for warranty and repair
information:

USA Canada

Nortel
640 Massman Drive
Nashville, TN, USA
37210

Nortel Repair Service Centre 30
30 Norelco Drive
Weston Ontario, Canada
M9L 2X6

For warranty and repair service outside the USA or Canada, please contact your distributor.

Canadian Notice

The Industry Canada designation identifies certified equipment. This certification means that the
equipment meets telecommunications network protective, operational and safety requirements as
prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The
Department does not guarantee the equipment will operate to the user's satisfaction.

BCM200/400 4.0 Installation and Maintenance Guide

20 Regulatory information

Federal Communications Commission (FCC) Notice

FCC registration number: This telephone equipment complies with Part 68, Rules and
Regulations, of the FCC for connection to the Public Switched Telephone Network.

Your connection to the Public Switched Telephone Network must comply with these FCC rules:

• Before installing this equipment, users should ensure that it is permissible to be connected to

the facilities of the local telecommunications company. The equipment must also be installed

using an acceptable method of connection. The customer should be aware that compliance

with the above conditions may not prevent degradation of service in some situations. See

installation instructions for details.

• Use only an FCC Part 68-compliant Universal Service Order Code (USOC) network interface

jack, as specified in the installation instructions, to connect to the Public Switched Telephone

Network.

• If the equipment causes harm to the telephone network, the telephone company will notify you

in advance that temporary discontinuance of the product may be required. But if advance

notice isn’t practical, the telephone company will notify you as soon as possible. You will also

be advised of your right to file a complaint with the FCC, if you believe it is necessary.

Ringer Equivalence Number (REN)

The REN provides an indication of the maximum number of terminals allowed to be connected to
a telephone interface. The termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the RENs of all the devices does not exceed 5.

EMI/EMC (FCC Part 15)

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

N0060612N0060612

Regulatory information 21

Important safety instructions

The following safety instructions cover the installation and use of the Product. Read carefully and
retain for future reference.

Installation

Warning: To avoid electrical shock hazard to personnel or equipment damage

observe the following precautions when installing telephone equipment:

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.

• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines. The exclamation
point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.

Use

When using your telephone equipment, basic safety precautions should always be followed to
reduce risk of fire, electric shock and injury to persons, including the following:

1 Read and understand all instructions.

2 Follow the instructions marked on the product.

3 Unplug this product (or host equipment) from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4 Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool.

5 Do not place this product on an unstable cart, stand or table. The product may fall, causing

serious damage to the product.

6 This product should never be placed near or over a radiator or heat register. This product

should not be placed in a built-in installation unless proper ventilation is provided.

7 Do not allow anything to rest on the power cord. Do not locate this product where the cord will

be abused by persons walking on it.

8 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric

shock.

9 Never spill liquid of any kind on the product.

10 To reduce the risk of electric shock do not disassemble this product, but have it sent to a

qualified service person when some service or repair work is required.

BCM200/400 4.0 Installation and Maintenance Guide

22 Regulatory information

11 Unplug this product (or host equipment) from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power supply cord or plug is damaged or frayed.

b If the product has been exposed to rain, water or liquid has been spilled on the product,

disconnect and allow the product to dry out to see if it still operates; but do not open up the
product.

c If the product housing has been damaged.

d If the product exhibits a distinct change in performance.

Caution: To eliminate the possibility of accidental damage to cords, plugs, jacks,

and the telephone, do not use sharp instruments during the assembly procedures.

Warning: Do not insert the plug at the free end of the handset cord directly into a
wall or baseboard jack. Such misuse can result in unsafe sound levels or possible
damage to the handset.

12 Save these instructions.

Use of a music source

In accordance with U.S. Copyright Law, a license may be required from the American Society of
Composers, Authors and Publishers, or similar organization if Radio or TV broadcasts are
transmitted through the music-on-hold or Background Music features of this telecommunication
system.

Nortel hereby disclaims any liability arising out of the failure to obtain such a license.

Safety

Business Communications Manager (BCM) equipment meets all applicable requirements of both
the CSA C22.2 No.60950 and UL 60950 Edition 3.

Danger: Risk of shock.
Read and follow installation instructions carefully.
Ensure the BCM system is not powered and that all telephone/data cables are removed
prior to opening the BCM unit in the field.
If installation of additional hardware and /or servicing is required, disconnect all telephone
cable connections prior to unplugging the BCM modules.
Ensure the BCM system is connected to a wall outlet with a third-wire protective earth
connection prior to connecting any telecommunications cables to the BCM main unit or
expansion units.

N0060612N0060612

Caution: Only qualified persons should service the system.
The installation and service of this hardware is to be performed only by service personnel
having appropriate training and experience necessary to be aware of hazards to which they
are exposed in performing a task and of measures to minimize the danger to themselves or
other persons.
Electrical shock hazards from the telecommunication network and AC mains are possible
with this equipment. To minimize risk to service personnel and users, the BCM system
must be connected to an outlet with a third-wire ground.
Service personnel must be alert to the possibility of high leakage currents becoming
available on metal system surfaces during power line fault events near network lines.
These leakage currents normally safely flow to Protective Earth ground through the power
cord. Therefore, it is mandatory that connection to an earthed outlet is performed first and
removed last when cabling to the unit. Specifically, operations requiring the unit to be
powered down must have the network connections (central office lines) removed first.

Enhanced 911 configuration

Warning:

Local, state and federal requirements for Emergency 911 services support by Customer
Premises Equipment vary. Consult your telecommunication service provider regarding
compliance with applicable laws and regulations.

Regulatory information 23

Radio-frequency interference

Warning: Equipment generates RF energy.

This equipment generates, uses, and can radiate radio-frequency energy. If not installed
and used in accordance with the installation manual, it may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class A
computing device pursuant to Part 15 of the FCC Rules and with ICES.003, CLASS A
Canadian EMI Requirements. Operation of this equipment in a residential area is likely to
cause interference, in which case the user, at his or her own expense, will be required to
take whatever measures may be required to correct the interference.

Telecommunication registration

BCM equipment meets all applicable requirements of both Industry Canada CS-03 and US Federal
Communications Commission (FCC) Part 68 and has been registered under files Industry Canada
332D-5980A and FCC US: AB6KF15B20705 (key system), US: AB6MF15B20706 (hybrid
system), and US: AB6PF15B23740 (PBX system). Connection of the BCM telephone system to
the nationwide telecommunications network is made through a standard network interface jack
that you can order from your local telecommunications company. This type of customer-provided
equipment cannot be used on party lines or coin lines.

BCM200/400 4.0 Installation and Maintenance Guide

24 Regulatory information

Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized maintenance facility designated
by the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect
the equipment. Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician.

International regulatory information

The CE Marking on this equipment indicates compliance with the following:
This device conforms to Directive 1999/5/EC on Radio Equipment and

Telecommunications Terminal Equipment as adopted by the European
Parliament And Of The Council.

This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.

Hereby, Nortel declares that BCM units, with Model No. NT9T61XX, NT9T62XX, NT9T64XX,
and NT9T65XX, are in compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.

Information is subject to change without notice. Nortel reserves the right to make changes in
design or components as progress in engineering and manufacturing may warrant. This equipment
has been tested and found to comply with the European Safety requirements EN 60950 and EMC
requirements EN 55022 (Class A) and EN 55024. These EMC limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial and light industrial environment.

Warning:

This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures. The
above warning is inserted for regulatory reasons. If any customer believes that they have
an interference problem, either because their Nortel product seems to cause interference
or suffers from interference, they should contact their distributor immediately. The
distributor will assist with a remedy for any problems and, if necessary, will have full
support from Nortel.

N0060612N0060612

Safety

Regulatory information 25

Warning:

Only qualified service personnel may install this equipment. The instructions in this
manual are intended for use by qualified service personnel only.

Warning: Risk of shock.

Ensure the BCM is unplugged from the power socket and that any telephone or network
cables are unplugged before opening the BCM main unit or expansion unit.

Read and follow installation instructions carefully

Warning: Only qualified persons should service the system.

The installation and service of this hardware is to be performed only by service
personnel having appropriate training and experience necessary to be aware of hazards
to which they are exposed in performing a task and of measures to minimize the danger
to themselves or other persons.

Electrical shock hazards from the telecommunication network and AC mains are
possible with this equipment. To minimize risk to service personnel and users, the BCM
system must be connected to an outlet with a third-wire Earth.

Service personnel must be alert to the possibility of high leakage currents becoming
available on metal system surfaces during power line fault events near network lines.
These leakage currents normally safely flow to Protective Earth through the power cord.
Therefore, it is mandatory that connection to an earthed outlet is performed first and
removed last when cabling to the unit. Specifically, operations requiring the unit to be
powered down must have the network connections (exchange lines) removed first.

Additional safety information

The following interfaces (TNV) can be connected to the Public Switched Telephone Network in
accordance with Nortel and the local carriers installation requirements:

• BCM, CSC GATi Ports

• BCM, CSC ADSL Port option

• Expansion Unit, Digital Trunk Module (T1/E1/ISDN)

• Expansion Unit, Global Analog Trunk Module 4 and 8 Port (Loop Start)

• Expansion Unit, CTM4/8 (Loop Start)

• Expansion Unit, 4x16 (Loop Start)

• Expansion Unit, BRIM (ST configuration)

BCM200/400 4.0 Installation and Maintenance Guide

26 Regulatory information

The following interfaces are designated as Safety Extra Low Voltage (SELV) and cannot be
connected to unprotected plant wiring.

• BCM, CSC Page Port

• BCM, CSC Auxiliary Ringer Port

• BCM, CSC Music On-Hold Port.

• BCM, CSC Relay Port

• BCM, CSC USB Port

• BCM, CSC Ethernet Port including optional Ethernet Hub Ports

ITU standardization compliance

The following list provides voice/data applications and telephony support for BCM 4.0:

• G.711 and G.729AB codecs

• V.27ter, V.29, and V.17 data modem modulation supported (T.38 fax control gateway)

•G3 fax

• T512.1 (Type 1 Receiver DTMF)

•G.168

•H.323

•Q.931

N0060612N0060612

Chapter 1

Getting started

About this guide

The BCM200/400 4.0 Installation and Maintenance Guide describes how to install, configure, and
maintain the BCM200 and BCM400 hardware running Business Communications Manager
(BCM) 4.0 software.

The concepts, operations, and tasks described in this guide relate to the hardware of the BCM
system. This guide provides task-based information on how to install the hardware components
and perform basic configuration tasks.

Use Element Manager, Startup Profile, and Telset Administration to configure various BCM
parameters.

In brief, the information in this guide explains:

• Installing hardware components

• Starting and initializing the system hardware

• Replacing components

• Testing the system

27

Audience

The BCM200/400 4.0 Installation and Maintenance Guide is directed to installers responsible for
installing, configuring, and maintaining BCM 4.0 systems.

To use this guide, you must:

• be an authorized BCM 4.0 installer or administrator within your organization

• know basic Nortel BCM terminology

• be knowledgeable about telephony and IP networking technology

Acronyms

The following is a list of acronyms used in this guide.

Table 1 Acronyms (Sheet 1 of 3)

Acronym Description

ACU Audio conference unit

AIS Alarm indication system

APC American Power Conversion

BCM200/400 4.0 Installation and Maintenance Guide

28 Chapter 1 Getting started

Table 1 Acronyms (Sheet 2 of 3)

Acronym Description

ASM Analog station module (analog station media bay module)

ATA Analog terminal adapter

BCM Business Communications Manager

BRIM Basic rate interface module (basic rate interface media bay module)

CAP Central answering position

CFA Carrier failure alarm

CLID Calling line identification

CO Central office

CSU Channel service unit

CTM Caller ID trunk module (caller ID trunk media bay module)

DDIM Digital drop and insert MUX

DIMM Dual in-line memory module

DMC Digital mobility controller

DSM Digital station module (digital station media bay module)

DSP Digital signal processor

DSU Data service unit

DTE Data terminal equipment

DTM Digital trunk module (digital trunk media bay module)

FEM Fiber expansion module

FRU Field replaceable unit

GASM Global analog station module (global analog station media bay module)

GATM Global analog trunk module (global analog trunk media bay module)

KEM Key expansion module

KIM Key indicator module

KRS Keycode retrieval system (Nortel keycode retrieval system)

LAN Local area network

LIU Line isolation unit

MBM Media bay module

MSC Media services card

MWI Message waiting indication

NIC Network interface card

ONS on-premise station

OSI Open switch interval

PCI Peripheral component interface

PEC Processor expansion card

PSTN Public switched telephone network

PSU Power supply unit

N0060612N0060612

Table 1 Acronyms (Sheet 3 of 3)

Acronym Description

QoS Quality of service

RAI Remote alarm indication

RAID Redundant array of independent disks

REN Ringer equivalence number

RFO Redundant feature option

RPS Redundant power supply

SAPS Station auxiliary power supply

SELV Safety extra low voltage

SSD System status display

UPS Uninterruptable power supply

USB Universal serial bus

VMWI Visual message waiting indicator

VOIP Voice over Internet protocol

WAN Wide area network

Chapter 1 Getting started 29

Symbols and conventions used in this guide

These symbols are used to highlight critical information for the BCM system.

Caution: Alerts you to conditions where you can damage the equipment.

Danger: Alerts you to conditions where you can get an electrical shock.

Warning: Alerts you to conditions where you can cause the system to fail or work

improperly.

Note: Alerts you to important information.

Tip: Alerts you to additional information that can help you perform a task.

BCM200/400 4.0 Installation and Maintenance Guide

30 Chapter 1 Getting started

Security Note: Indicates a point of system security where a default should be

changed, or where the administrator needs to make a decision about the level of

!

security required for the system.

Warning: Alerts you to ground yourself with an antistatic grounding strap
before performing the maintenance procedure.

Warning: Alerts you to remove the BCM main unit and expansion unit power
cords from the AC outlet before performing any maintenance procedure.

These conventions and symbols are used to represent the Business Series Terminal display and
dialpad.

Convention Example Used for

Word in a special font (shown in
the top line of the display)

Underlined word in capital letters
(shown in the bottom line of a
two-line display telephone)

Dialpad buttons

Pswd:

PLAY

£

Command line prompts on display telephones.

Display option. Available on two-line display
telephones
option on the display to proceed.

Buttons you press on the dialpad to select a
particular option.

. Press the button directly below the

These text conventions are used in this guide to indicate the information described:

Convention Description

bold Courier
text

Indicates command names and options and text that you must enter.
Example: Use the
Example: Enter

info command.

show ip {alerts|routes}.

italic text Indicates book titles.

plain Courier
text

FEATURE
HOLD

Indicates command syntax and system output (for example, prompts
and system messages).

Example:

Set Trap Monitor Filters

Indicates that you press the button with the coordinating icon on
whichever set you are using.

RELEASE

N0060612N0060612