Important Information about the Ethernet Routing Switch
8600 Enterprise enhanced CPU daughter card
The Ethernet Routing Switch 8692SF Enterprise enhanced CPU daughter card
(Supermezz) is a mezzanine daughter card for the 8692SF module. The daughter
card consists of dual 1 GHz Power PC processors. Installing the daughter card to an
8692SF module offloads processor-intensive tasks from the 333 MHz processor
located on the 8692SF CPU motherboard.
With Ethernet Routing Switch 8600 Series Release 4.1, the daughter card provides
decreased convergence times for large forwarding tables as well as a better scaling
and performance number.
The daughter card installation kit includes a CPU daughter card and associated
installation hardware, as shown in Figure 1.
Figure 1 Daughter card installation kit
Note: If you choose the 8692SF CPU daughter card option and have a
system with two Ethernet Routing Switch 8692SF modules, you must
install the daughter card on each of the 8692SF modules.
1
3
4
2
2 = Hex key
1 = CPU daughter card
3 = Socket head screws
(qty 2) 2-56 x .625
Contents of installation kit:
4 = Socket head screws
(qty 2) 2-56 x .188
2 318620-A Rev 00
Important Information about the Ethernet Routing Switch 8600 Enterprise enhanced CPU daughter card
See Installing Ethernet Routing Switch 8600 Modules for instructions on installing
the Enterprise enhanced CPU daughter card in the 8692SF module. You can access
the above document directly from the Internet at www.nortel.com.
For information on the Ethernet Routing Switch 8600 product, perform the
following:
1 Select Support and Training > Technical Support.
In the Technical Support page, ensure the Browse product support tab is
selected.
2 In Step 1 Select from, select Product Categories from the drop-down menu.
3 Select Ethernet Routing Switches from the Routers and Routing Switches
section.
4 In Step 2 ... choose a product, select Ethernet Routing Switch 8600.
5 In Step 3 ... and get the content, select Documentation.
6 Click Go.
Note: I/O and CPU modules are static-case sensitive products. To
prevent physical damage to a module, observe the following precautions:
• Use a wrist strap to connect to earth ground when handling a
module.
• Place modules on conductive surfaces or in a chassis connected to
earth ground.
• Transport modules in their original packaging.
Loading...