Norstar T7100 User Guide

Cord connections

Connect cords to the telephone, refer to

“Cord connections” illustrations.

Connect line cord to wall jack.

Place the telephone onto the wall mount plate and slide it down.

Press here to remove the stand.

Use the key hole slots

on the stand to mark

Press here to remove

key hole slots

Mount the stand as shown and insert screw. Use the screw that came with your telephone.

Connect cords to the telephone, refer to “Cord connections”

the stand.

the location for the

screws. Tighten screws

Mount the telephone onto the screws and slide it down.

Connect line cord to wall jack.

illustrations.

for a secure fit.

Return to Menu

Wall mount without a telephone stand

T7100 Telephone User Card

Desk mount option

Route line cord through the stand.

Connect line cord to wall jack.

Wall mount with a telephone stand

Connect cord to handset.

Your T7100 telephone

Telephone light

Flashes when a call rings at the telephone. Lights up when Message Waiting Indication (MWI) is

supported by system software. Contact your System Administrator or Coordinator for more information.

Adjust the display to your personal preference.

Adjustable display

Shows the time and date, call and feature information.

® Release button

Ends an active call.

Dial pad

√ Volume control

Adjusts the handset a nd ringervolume.

Write your extension number on this card.

≤ Feature button

Starts or ends a feature.

≥ Hold button

Places calls on hold.

Memory button

Telep h o ne setup

Programming the memory button

Making and answering calls

Display contrast level

Adjust the contrast of your display.

1. Press ≤•‡.

2. Press ⁄ to · to select a contrast level. The higher the number the higher the contrast level.

Language choice

≤•ﬁ‚⁄

Select Primary Language for the telephone display.

≤•ﬁ‚¤

Select Alternate Language for the telephone display.

≤•ﬁ‚‹

Select Alternate Language 2 for the telephone dis play.

≤•ﬁ‚›

Select Alternate Language 3 for the telephone dis play.

Ring type

Select a different ring for your telephone.

1. Press ≤•ﬂ.

2. Press ⁄

3. Press ≤

, ¤, ‹, ›, to hear the different ring types.

to store the ring type.

Button inquiry

Check what is programmed on your memory button.

1. Press ≤•‚.

2. Read the display.

3. Press ≤ when finished.

Button label

Use the button label strip on the telephone to show what is programmed on your memory button. Spare button label strips are provided with your telephone.

Tip

You can use the Desktop Assistant application to customize button label strips for your telephone.

Go to www.nortelnetworks.com/sbs_desktopassistant and downloadtheDesktopAssistant applicationtoyour personal computer.

The memory buttonstores an autodialnumber or feature code to give you one touch dialing or feature activation. You can program the memory button with a new number or feature.

External autodial

1. Press ≤•⁄.

2. Dial the external telephone number.

3. Press ≥ to store the number.

4. Label your new button.

Internal autodial

1. Press ≤•¤.

2. Dial the extension number.

3. Label your new button.

Features

1. Press ≤• ‹.

2. Press ≤

3. Label your new button.

and enter the feature code.

How to erase memory buttons

1. Press ≤•⁄.

2. Press ≥ to erase the button.

How to label your memory button

1. Remove the plastic lens and button label strip from the telephone.

2. Write the name of the memory button on the button label strip.

3. Insert the button label strip back on the telephone.

4. Insert plastic lens, matching the tabs on the lens with the notches on the telephone.

Align tabs

Making external calls

1. Lift the handset.

2. Press · (your system’s exchange line or line pool access code).

3. Dial the external telephone number.

Contact your System Administrator or Coordinator to confirm what exchange line or line pool access code to use on your telephone.

Making internal calls

1. Lift the handset.

2. Dial the extension number.

Contact your System Administrator or Coordinator for a list of extension numbers.

Answering calls

Lift the handset to answer a call when your telephone rings and the display light flashes.

How to hold calls

1. While on a call, press ≥.

2. To retrieve the held call, press≥ again. Check the displayfor confirmation or additional information.

Making or answering a second call

The T7100 telephone allows you to have two calls active at the same time. Use ≥ to switch between calls.

To answer a second call while on another call

1. Press ≥ to answer the second call. The first call is automatically put on hold.

To hold a call and make a second call

1. Press ≥ to put the first call on hold.

2. Dial the telephone number of the s econd call.

To return to the first call

1. Press ≥ again to return to the first call.

The second call is automatically put on hold.