NORITAKE-ITRON GU256x64D-3900 technology data
Dot Graphic VFD Module GU256x64D-3900
x
x
256x64 Dot Graphic
q
q Single 5V Supply
q High Brightness Blue Green Display
q Operating Temp -40°C to +85°C
q 3 ASCII Fonts (6x8, 8x16, 16x16)
q High Speed 8 Bit Parallel Interface
q Asynchronous Serial Interface
CN4
The module includes the Vacuum Fluorescent Display glass, VF
drivers and micro-controller ICs with refresh RAM, character
generator and interface logic. The high speed 8 bit parallel
interface is 5V TTL/CMOS compatible suitable for connection to
a host CPU bus. The asynchronous serial interface accepts
baud rates up to 38400, none parity. Three character font tables
can be software selected. User defined characters and many
control commands are available.
44.0
28.65
50.0
19.475
115.05
153.0
159.0
145.0
CN3 - 7 pin Connector
(Mate JST-XHP-7)
CN2 - 16 pin Connector
(Mate MIL-STD-16P)
ELECTRICAL SPECIFICATION
Parameter Symbol Value Condition
Power Supply Voltage VCC 5.0VDC +/- 5% GND=0V
Power Supply Current ICC 0.85ADC typ. VCC=5V
RS232 Serial High Input VIH 3.0VDC min. VCC=5V
RS232 Serial Low Input VIL -3.0VDC max. VCC=5V
RS232 Serial High Output VOH 5.0VDC min. VCC=5V
RS232 Serial Low Output VOL -5.0VDC max. VCC=5V
Logic High Input VIH 0.8VDC min. VCC=5V
Logic Low Input VIL 0.2VDC max. VCC=5V
Logic High Output VOH 3.5VDC min. IOH = -10uA
Logic Low Output VOL 0.6VDC max. IOL =4mA
The power on rise time should be less than 100ms.The inrush current at power on can be 2 x ICC.
SOFTWARE COMMANDS
Command Name Hex
Back Space 08
Horizontal Tab 09
Line Feed 0A
Cursor Home* 0B
Clear Display 0C
Carriage Return 0D
Escape 1B + Ø
Ø Specify Download Character +25
Ø Download Char. Definition +26
Ø Delete Download Character +3F
Ø Initialize Display +40
Ø Define International Font +52
Ø Define Char. Code Type +74
Overwrite Mode 1F 01
Vertical Scroll Mode 1F 02
Horizontal Scroll Mode 1F 03
Cursor Set 1F 24
RAM Macro Processing 1F 3A
Display Brightness 1F 58
Macro Execution 1F 5E
Enable/Disable Reverse Disply 1F 72
Horizontal Scroll Speed 1F 73
Write Mixture Display Mode 1F 77
Dot Pattern Draw 1F 28 64
User Set Up Mode Start 1F 28 65
I/O Port Control 1F 28 70
RS232 INTERFACE (CN3)
Pin Sig
1RXD
2DTR
3DSR
4TXD
5NC
6 VCC (+5V)
7GND
PARALLEL INTERFACE (CN2)
Pin Sig Pin Sig
1D7 9 GND
2D6 10 /WR
3D5 11 GND
4 D4 12 READY
5D3 13 GND
6D2 14 GND
7D1 15 VCC
8D0 16 VCC
I/O PORT & POWER CON. (CN4)
Pin Sig Pin Sig
1 Bit 7 8 Bit 0
2 Bit 6 9 Bit 3
3 Bit 5 10 Bit 2
4 Bit 4 11 Bit 1
5 Bit 3 12 Bit 0
6 Bit 2 13 VCC
7 Bit 1 14 GND
See full data sheet for additional
commands.
8.65
3.0
3.0
Dimensions in mm & subject to
tolerances.
Mounting holes 3.2mm dia.
9.9 ma
1.6
10.0 ma
OPTICAL and ENVIRONMENTAL SPECIFICATIONS
Parameter Value
Display Area (XxY mm) 115.05 x 28.65
Dot Size/Pitch (XxY mm) 0.3 x 0.3 / 0.45 x 0.45
Luminance 800 cd/m2 Typ.
Colour of Illumination Blue-Green (Filter for colours)
Operating Temperature
Storage Temperature
Operating Humidity (non condensing)
RS232
Parallel
5VDC Supply
DISPLAY ADDRESS SELECT COMMAND MODE SELECT
SW1 SW2 SW3 SW4 Address SW6 Mode
OFF OFF OFF OFF 00H OFF Normal command
ON OFF OFF OFF 01H ON Graphic DMA
OFF ON OFF OFF 02H
ON ON OFF OFF 03H
OFF OFF ON OFF 04H
ON OFF ON OFF 05H OFF Normal Operation
OFF ON ON OFF 06H ON Memory Re-write
ON ON ON OFF 07H
OFF OFF OFF ON 08H
ON OFF OFF ON 09H
OFF ON OFF ON 0AH OFF Direct Mode
ON ON OFF ON 0BH ON Packet Mode
OFF OFF ON ON 0CH
ON OFF ON ON 0DH
OFF ON ON ON 0EH
ON ON ON ON 0FH
BAUD RATE SELECT
SW5 Baud Rate
OFF 38,400
ON 19,200
Subject to change without notice.
IUK Doc Ref:04286 Iss:1 11Apr03
MODULE BLOCK DIAGRAM
Controller
-40°C to +85°C
-40°C to +85°C
20 to 80% RH @ 25°C
VFD Glass
Flash ROM
RAM
OPERATING MODE SELECT
SW7 Mode
PROTOCOL MODE SELECT
SW8 Mode
DC/DC
Converter
CONTACT
Noritake Sales Office Tel Nos
Nagoya Japan: +81 (0)52-561-9867
Canada: +1-416-291-2946
Chicago US A: +1-847 -439-9020
Munchen (D): +49 (0)89-3214-290
Itron UK: +44 (0)1493 601144
Rest Eur ope: +49 (0)61-0520-9220
www.norita ke-itron.com
NORITAKE ITRON VFD MODULES 256 x 64 Dot Graphic
Loading...