NORITAKE-ITRON CU40026-TW200A technology data

5X7 Dot Character VFD Module CU40026-TW200A

2 Lines of 40 Characters 5mm High

ELECTRICAL SPECIFICATION

5.0VDC +/- 5%

SOFTWARE COMMANDS

The module includes the Vacuum Fluorescent Display glass

tables can be hardware or software selected. User defined

Dimensions in mm & subject to tolerances. Mounting holes 3.5mm

dia.

16.0

16.5

43.0

188.55

21.5

20.7

13.0

1.6

11.9

IDC (16 WAY)

PWR (AMP171825-3)

13.5

5.0

CONTACT

PCB JUMPERS

IDC DATA CONNECTOR

q High Speed Parallel/Serial Interface q Operating Temp -40° C to +85°C q Single 5V Supply q High Brightness Blue Green Display q ASCII, Katakana & Extended Character Font q 2 User Definable Character RAM

driver and micro-controller ICs with refresh RAM, character generator and interface logic. The high speed 8 bit parallel interface is 5V CMOS compatible suitable for connection to a host CPU bus. The asynchronous serial interface accepts baud rates up to 19,200 with or without parity. Two character font

characters and many control commands are available.

230.0

240.0

Parameter Symbol Value Condition

Power Supply Voltage VCC

GND=0V Power Supply Current ICC 500mADC typ. Vcc=5V Logic High Input VIH 2.0VDC min. VCC=5V Logic Low Input VIL 0.8VDC max. VCC=5V Logic High Output VOH 4.4VDC min. IOH = -2.0mA Logic Low Output VOL 0.5VDC max. IOL =2.0mA

The power on rise time should be less than 100ms.The inrush current at power on can be 2 x ICC.

OPTICAL and ENVIRONMENTAL SPECIFICATIONS

Parameter Value

Character Size/Pitch (XxY mm) 3.3 x 5.05/4.75 x 9.95 Dot Size/Pitch (XxY mm) 0.5 x 0.55/0.7 x 0.75 Luminance 700 cd/m2 (204 fL) Typ. Colour of Illumination Blue-Green (Filter for colours) Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Operating Humidity (non condensing) 20 to 80% RH @ 25°C

Instruction D0-D7 Instruction D0-D7

Back Space 08H International Font 18H Horizontal Tab 09H Katakana Font 19H Line Feed 0AH Euro Currency Mark 1AH Form Feed 0CH Escape 1BH Carriage Return 0DH ã Send User Font +43H Clear Display 0EH ã Position cursor +48H Increment Write Mode 11H ã Software Reset +49H Vertical Scroll Mode 12H ã Luminance +4CH Horizontal Scroll Mode 13H ã Flickerless Write +53H Underline Cursor On 14H ã Cursor Blink Speed +54H 5x7 Block Cursor On 15H Character Data 20H+ Cursor Off 16H User Character Data 00H+ Cursor Blinking 17H

TIMING PARAMETERS (min)

Data Set Up To Write 100ns Write Pulse Width 160ns Hold After Write 10ns

Subject to change without notice. Detailed specification on request. IUK Doc Ref:4406 Iss:1 13Aug03

CHARACTER FONTS

(O)PEN (L)INK

Baud J2 J1 J0

19200 O O O

9600 O O L

4800 O L O 2400 O L L 1200 L O O

Parity J4 J3

EVEN O O

ODD O L

NONE L L / O

Font JA

International L

Katakana O

3 PIN POWER CONNECTOR

Pin Sig

1 VCC (5V) 2 SIN/TEST 3 GND (0V)

International Font Additional Katakana Font

Sig Pin Sig

1 D7 9 /WR 2 D6 10 /CS 3 D5 11 SIN/TEST 4 D4 12 BUSY 5 D3 13 GND (0V) 6 D2 14 GND (0V) 7 D1 15 VCC (5V) 8 D0 16 VCC (5V)

Noritake Sales Office Tel Nos

Nagoya Japan: +81 (0)52-561-9867

Canada: +1-416-291-2946

Chicago USA: +1-847-439-9020

Munchen (D): +49 (0)89-3214-290

Itron UK: +44 (0)1493 601144

Rest Europe: +49 (0)61-0520-9220

www.noritake-itron.com

NORITAKE ITRON VFD MODULES 2x40, 5mm Dot Character