NORITAKE-ITRON CU20025-TW200A technology data

R
)
q 2 Lines of 20 Characters 5mm High q High Speed Parallel/Serial Interface q Wide Operating Temp -40°C to +85°C q Single 5V Supply q High Brightness Blue Green Display q ASCII, Katakana & Extended Character Font q 16 User Definable Characters
The module includes the Vacuum Fluorescent Display glass, driver and micro-controller ICs with refresh RAM, character generator and interface logic. The high speed 8 bit parallel interface is 5V CMOS compatible suitable for connection to a host CPU bus. The asynchronous serial interface accepts baud rates up to 19,200 with or without parity (Default – 19200 BPS, Even Parity, International Font). Two character font tables can be hardware or software selected.
PWR (AMP171825-3
18.675
ELECTRICAL SPECIFICATION
Parameter Symbol Value Condition
Power Supply Voltage VCC 5.0VDC +/- 5% GND=0V Power Supply Current ICC 280mADC Vcc=5V Logic High Input VIH 0.8 x Vcc min. VCC=5V Logic Low Input VIL 0.3 x Vcc max. VCC=5V Logic High Output VOH Vcc-1.5VDC min. IOH = -5.0mA Logic Low Output VOL 1.5VDC max. IOH =5.0mA
The power on rise time should be less than 100ms.The inrush current at power on can be 2 x ICC. The Icc current is 10mA maximum while in power down mode.
OPTICAL and ENVIRONMENTAL SPECIFICATIONS
Parameter Value
Character Size/Pitch (XxY mm) 2.65 x 5.7/4.0 x 7.2 Dot Size/Pitch (XxY mm) 0.45 x 0.5/0.55 x 0.7 Luminance 350 cd/m2 (102 fL) min. Colour of Illumination Blue-Green (Filter for more colours) Operating Temperature Storage Temperature Operating Humidity (non condensing)
SOFTWARE COMMANDS
Instruction D0-D7 Instruction D0-D7
Back Space 08H Cursor is invisible 16H Horizontal Tab 09H Cursor is blinking underline 17H Line Feed 0AH International Font 18H Form Feed 0CH Katakana Font 19H Carriage Return 0DH Euro Currency Mark 1AH Clear Display 0EH Escape 1BH Cancel 0FH ã Send User Font +43H Character Overwrite Mode 11H ã Position cursor +48H Scroll Up Mode 12H ã Software Reset +49H Horizontal Scroll Mode 13H ã Luminance +4CH Cursor on underline 14H ã Flickerless Write +53H Cursor is blinking character 15H ã Cursor Blink Speed +54H
TIMING PARAMETERS (min)
Data Set Up To Write 100ns Write Pulse Width 160ns Hold After Write 10ns
-40°C to +85°C
-40°C to +85°C 20 to 80% RH @ 25°C
Subject to change without notice. Detailed specification on request. IUK Doc Ref:03849 Iss.1 2 Apr 02
78.65
116.0
IDC (16 WAY)
12.9
16.4
4.0
Dimensions in mm & subject to tolerances. Mounting slots 3.5mm dia.
CHAR ACTER FONTS
PCB JUMPERS (O)PEN (L)INK
Baud J2 J1 J0
19200 O O O
9600 O O L 4800 O L O 2400 O L L 1200 L O O
Parity J4 J3
EVEN O O
ODD O L
NONE L L / O
Font JA
International L
Katakana O
3 PIN POWER CONNECTOR
Pin Sig
1VCC (5V) 2SIN/TEST 3GND (0V)
40.0
36.5
1.75
International Font Additional Katakana
IDC DATA CONNECTO
Pin Sig Pin Sig
1D7 9 /WR 2D610 /CS 3D511SIN/TEST 4D412BUSY 5D313GND (0V) 6D214GND (0V) 7D115VCC (5V) 8D016VCC (5V)
CONTACT
Noritake Sales Office Tel Nos
Nagoya Japan: +81 (0)52-561-9867
Canada: +1-416-291-2946
Chicago USA: +1-847-439-9020
Munchen (D): +49 (0)89-3214-290
Itron UK: +44 (0)1493 601144
Rest Europe: +49 (0)61-0520-9220
www.noritake-itron.com
10.4
1.6
9.5
NORITAKE ITRON VFD MODULES 2 x 20, 5mm Dot Character
Loading...