NORGREN F64G technology data

7/97 N/AL.8.240.100.01

F64G

Automatic Drain Manual Drain

Olympian Plus

General Purpose Filter

1/4

"

, 3/8

",

1/2", 3/4"Port Sizes

● Olympian Plus plug in design

● High efficiency water and particle removal

● Quick release bayonet bowl

● High visibility prismatic sight glass*

● Optional service indicator

* UK and other patents pending

Technical Data

Fluid: Compressed air
Maximum pressure:

Guarded transparent bowl: 10 bar (150 psig)
Metal bowl: 17 bar (250 psig)

Operating temperature*:

Guarded transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +80°C (0° to +175°F)

* Air supply must be dry enough to avoid ice formation at temperatures below +2°C
(+35°F).

Partical removal: 5 µm, 25 µm or 40 µm. Within ISO 8573-1,

Class 3 and Class 5

Typical flow at 6,3 bar (90 psig) inlet pressure and 0,5 bar (7 psig)

pressure drop:
5 µm element: 55 dm3/s (116 scfm)
40 µm element: 70 dm3/s (148 scfm)

Automatic drain connection: 1/8

"

Automatic drain operating conditions:

Minimum pressure: 0,7 bar (10 psig). Drain opens when bowl
pressure drops below 0,2 bar (3 psig).
Minimum air flow: 1 dm3/s (2 scfm) required to close drain.

Nominal bowl size: 0,2 litre (7 fluid ounce)

Our policy is one of continuous research and development.

We reserve the right to amend, without notice, the specifications given in this document.

ISO Symbols

Ordering Information

See

Ordering Information

on the following

pages.

Materials:

Body: Zinc
Yoke: Zinc
Metal bowl: Aluminium
Standard metal bowl prismatic liquid level
indicator lens: Grilamid
Optional metal bowl sight glass: Pyrex
Optional transparent bowl: Polycarbonate
Element: Sintered plastic
Elastomers: Synthetic rubber

Optional service life indicator:

Body: Transparent nylon.
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile

Back to Selector Page

N/AL.8.240.100.02 7/97

Typical Performance Characteristics

F64G

FLOW CHARACTERISTICS

0 20 40 60 80 100 dm3/s

AIR FLOW

0 40 80 120 160 200 240 scfm

0,8

0,6

0,4

0,2

0

PRESSURE DROP

bar g

1

8

6

4

2

0

psig

PORT SIZE: 1/2

"

40 µm ELEMENT

INLET PRESSURE - bar g (psig)
2,5

(36)

4,0

(58)

6,3

(91)

8,0

(116)

10,0

(150)

Ordering Information. Models listed include ISO G threads, automatic drain, metal bowl, 40 µm element. Models do not include the

service life indicator.

† Typical flow with a 40 µm element at 6,3 bar (90 psig) inlet pressure and a 0,5 bar (7 psig) pressure drop.
For replacement Filter (without yoke) substitute ‘N’ at the 5th and 6th digits eg: F64G-NNN-AD3.

Port Size Model Flow†dm3/s (scfm) Weight kg (lb)
G1/4 F64G-2GN-AD3 33 (70) 1,42 (3.13)
G3/8 F64G-3GN-AD3 66 (140) 1,42 (3.13)
G1/2 F64G-4GN-AD3 70 (148) 1,32 (2.91)
G3/4 F64G-6GN-AD3 N.A. 1,72 (3.79)

Our policy is one of continuous research and development.

We reserve the right to amend, without notice, the specifications given in this document.

F 6 4-G

★ ★

-

★★ ★ ★

Port Size Substitute
1/4

"

2

3/8

"

3

1/2

"

4

3/4

"

6

Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G

Drain Substitute
Manual M
Auto drain A

Element Substitute
5 µm 1
25 µm 2
40 µm 3

Service Life Indicator Substitute
With D
Without N

Alternative Models

Bowl Substitute
Metal with liquid level indicator D
Transparent with guard P
Closed bowl* E

Wall Mounting Bracket Service Indicator

74504-50

Factory fit option only

See alternative models table

Accessories

* For vacuum use.