Norgren 3202-1A User Manual

Features

Norgren GT Development 3202-1A toggle
switches are heav y-duty switches with push­to-connect fittings. These three-way valves are
designed for the dash-board operation of tr uck air
system accessories.

Performance

Application
Material
Function

Part Number
Rated P SI
Operating Temperature
Allowed Leakage:
Equivalent Orifice

Connectors

Weight

Three-way designed for dashboard operation of truck air system accessories.
Zytel, nylon glass filled.
When valve is s witched off, supply is blocked and deliver y is vented. When valve is sw itched on, supply is

connected to delivery.
32 02-1A
150 PSIG maximum

-10°F (-23.3°C) to 160°F (71.1°C)
On and of f leakage 28 SCCM at 100 PSIG.
1/4" fittings, assuming Cd = .65

Inlet to outlet = .115 diameter or greater
Outlet to exhaust = .080 diameter or greater

Two 1/4" push-to-connect fittings with rigid tube support. Fittings meet DOT FMVSS 106 50 lb. pull test
when used with SAE J84 4 nylon tubing.

25 grams (approximate)

Toggle-Style Air Switch

3202-1A

REV: 8/14 01

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren GT Development Corporaton, 2014

Toggle-Style Air Switch 3202-1A

Dimensions (Inches)

1.0

DIRECTION ARROWS

DEPICTING IN AND OUT

9/16 HEX

0.430

+ 0.010

- 0.005

FLAT

15/32-32
THREAD

ON

60° ±5°

OFF

Warning

Improper selection, misuse, age or malfunction of components used in
commercial vehicle systems can cause failure in various modes. The system
designer is warned to consider the failure modes of all component parts
used in commercial vehicle systems and to provide adequate safeguards to
prevent personal injury or damage to equipment or property in the event of
such failure modes. System designers and end users are cautioned to consult
instruction sheets and specifications available from the factor y. The system
designer/end user is responsible for verif ying that all requirements for the
application are met.

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren GT Development Corporaton, 2014

Warranty

The products described herein are warranted subject to seller’s Standard
Terms and Condition of Sale, available at seller’s website.

REV: 8/1402