Norgren 11-002 Datasheet

See Section ALE-24 for Accessories

ALE-5-14

Littleton, CO USA Phone [phone] www.norgren.com

11-002

● Large diaphragm provides accurate and quick

response to changing flow demands and line
pressure

● Floating valve pin provides positive valve seating

● Balanced valve minimizes effect of variations in inlet

pressure on outlet pressure

● Standard relieving models allow reduction of

downstream pressure when the system is
dead-ended

Pressure Regulator

1/4", 3/8", 1/2" Port Sizes

Port Size Model Number Flow†scfm (dm3/s) Weight lbs (kg)

1/4" 11-002-013 110 (52) 1.9 (0.86)
3/8" 11-002-037 110 (52) 1.9 (0.86)
1/2" 11-002-061 260 (123) 2.0 (0.91)

Ordering Information. Models listed have PTF threads, T-bar adjustment, relieving diaphragm, and 5 to 125 psig (0.3 to 8.5 bar) outlet

pressure adjustment range*.

† Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set.
*Outlet pressure can be adjusted to pressures in excess of, and less than, those specified.Do not use these units to control pressures outside of the specified ranges.

Alternative Models

Threads Substitute
PTF 0
ISO G parallel 8
ISO G Rc 9

0

★

-

★

★ ★★ ★

2

- -

1

1

Option Substitute
Handwheel adjustment 8C
Screw adjustment 8B
Mounting bracket assembled to unit 1A
Threaded bonnet for panel mounting, hand wheel adjustment 2A
Threaded bonnet for panel mounting, T-bar adjustment 2B
Threaded bonnet for panel mounting, screw adjustment 2C

Outlet Pressure Adjustment Range*

5 to 50 psig (0.3 to 3.5 bar)

Port Size Relief Type Gauge Substitute
1/4" Non-relieving Without 003
1/4" Relieving Without 015
3/8" Non-relieving Without 027
3/8" Relieving Without 039
1/2" Non-relieving Without 051
1/2" Relieving Without 063
1/4" Non-relieving With 009
1/4" Relieving With 021
3/8" Non-relieving With 033
3/8" Relieving With 045
1/2" Non-relieving With 057
1/2" Relieving With 069

Outlet Pressure Adjustment Range*

5 to 125 psig (0.3 to 8.5 bar)

Port Size Relief Type Gauge Substitute
1/4" Non-relieving Without 001
1/4" Relieving Without 013
3/8" Non-relieving Without 025
3/8" Relieving Without 037
1/2" Non-relieving Without 049
1/2" Relieving Without 061
1/4" Non-relieving With 007
1/4" Relieving With 019
3/8" Non-relieving With 031
3/8" Relieving With 043
1/2" Non-relieving With 055
1/2" Relieving With 067

Outlet Pressure Adjustment Range*

5 to 250 psig (0.3 to 17 bar)

Port Size Relief Type Gauge Substitute
1/4" Non-relieving Without 005
1/4" Relieving Without 017
3/8" Non-relieving Without 029
3/8" Relieving Without 041
1/2" Non-relieving Without 053
1/2" Relieving Without 065
1/4" Non-relieving With 011
1/4" Relieving With 023
3/8" Non-relieving With 035
3/8" Relieving With 047
1/2" Non-relieving With 059
1/2" Relieving With 071

* Outlet pressure can be adjusted to pressures in excess of, and less than, those specified.Do not use these units to control pressures outside of the specified ranges.

ALE-5-15

All Dimensions in Inches (mm)

Littleton, CO USA Phone [phone] www.norgren.com

11-002 Special Purpose Regulators

Technical Data

Fluid: Compressed air
Maximum pressure: 400 psig (28 bar)
Operating temperature*: -30° to 175°F (-34° to 80°C)

*Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C)

Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure
and 15 psig (1 bar) droop from from set:

1/4" and 3/8" ports: 110 scfm (52 dm3/s)
1/2" ports: 260 scfm (123 dm3/s)

Gauge ports

1/8" PTF with PTF main ports
Rc1/8 with ISO G and ISO Rc main ports

Materials

Body: Zinc
Bonnet: Aluminum
Valve: Brass and nitrile
Valve seat: Brass
Elastomers: Nitrile
Bottom plug

1/4" and 3/8" Ports: Brass
1/2" Ports: Nylon

Typical Performance Characteristics

PORT SIZE: 1/4

"

INLET PRESSURE: 150 psig (10 bar)
RANGE: 5 to 125 psig (0.3 to 8.6 bar)

FLOW CHARACTERISTICS

0 5 10 15 20 30 dm3/s

AIR FLOW

0 10 20 30 40 50 scfm

OUTLET PRESSURE

8

6

4

2

0

bar

100

80

60

40

20

0

psig

120

PORT SIZE: 1/2

"

INLET PRESSURE: 150 psig (10 bar)
RANGE: 5 to 125 psig (0.3 to 8.6 bar)

FLOW CHARACTERISTICS

0 20 40 60 80 100 dm3/s

AIR FLOW

0 40 80 120 160 200 scfm

OUTLET PRESSURE

8

6

4

2

0

bar

100

80

60

40

20

0

psig

120

PORT SIZE: 1/4

"

INLET PRESSURE: 100 psig (7 bar)
RANGE: 5 to 125 psig (0.3 to 8.6 bar)

FLOW CHARACTERISTICS

0 5 10 15 20 30 dm3/s

AIR FLOW

0 10 20 30 40 50 scfm

OUTLET PRESSURE

8

6

4

2

0

bar

100

80

60

40

20

0

psig

120

PORT SIZE: 1/2

"

INLET PRESSURE: 100 psig (7 bar)
RANGE: 5 to 125 psig (0.3 to 8.6 bar)

FLOW CHARACTERISTICS

0 20 40 60 80 100 dm3/s

AIR FLOW

0 40 80 120 160 200 scfm

OUTLET PRESSURE

8

6

4

2

0

bar

100

80

60

40

20

0

psig

120

Service Kits

Type Part number
Relieving, 1/4" and 3/8" ports 529-03
Relieving, 1/2" ports 535-03
Non-relieving, 1/4" and 3/8" ports 529-01
Non-relieving, 1/2" ports 535-01

Service kit includes diaphragm, valve, valve spring, and o-rings.

* Regulators with 1/4" and 3/8" ports.
** Regulators with 1/2" ports.

3.13 (80) *

3.38 (86) **

3.00 (76) *

3.31 (84) **

6.41 (163) *

6.50 (165) **

Panel Mounting Option
Requires alternative
threaded bonnet.
Panel mounting hole
diameter: 1.06" (27 mm).
Panel thickness: 0.2" to

0.4" (5 to 10 mm).

2.00 (50)

1.25 (32) *

1.44 (37) **

7.29 (185) *

7.38 (187) **

3.06 (78) *

3.13 (80) **

1.63 (41)

ISO Symbols

Relieving

Non relieving