Norgren 07 User Manual

PTH Filter/Regulator-Lubricator
Combination Units

07 Series

Compact design
Filter removes liquids and solid

particles down to 5 µm
Push to lock adjusting knob with

tamper resistant option

icro-Fog lubricator provides air line

M
lubrication to one or more air driven
tools or other devices

Nearly constant oil density output
with varying air flow

Fluid:

Compressed air

Maximum pressure

Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)

Operating temperature*

Transparent bowl: 0° to 125°F (-20° to
50°C)

Metal bowl: 0° to 150°F (-20° to 65°C)

Air supply must be dry enough to avoid ice formation at

*
temperatures below 35°F (2°C)

Typical flow at 100 psig (7 bar) inlet
pressure, 90 psig (6.3 bar) set pressure
and a droop of 15 psig (1 bar) from set:

1/8" ports: 10 scfm (5 dm3/s)
1/4" ports: 14 scfm (7 dm3/s)

Drain connection:

1/8" male pipe

Filter/Regulator

AIR LINE EQUIPMENT

Particle removal:

5 µm or 40 µm. Within ISO 8573-1,
Class 3 and Class 5

Gauge ports:

1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports

Automatic drain operation:

Spitter type drain operates momentarily
when a rapid change in air flow occurs
or when the supply pressure is reduced.

Lubricator

Start point (i.e., minimum flow required
for lubricator operation): 0.5 scfm (0.24
dm3/s) at 90 psig (6.3 bar) inlet
pressure

Nominal bowl capacity:

1 fluid ounce (31 ml)

Materials

Bodies: Zinc

Ordering Information

Models listed include PTF threads, transparent bowls, filter/regulator with relieving diaphragm, automatic drain, 5 µm element, 5 to
100 psig (0.3 to 7 bar) outlet pressure adjustment range*, gauge, and microfog lubricator .

Port Size Model Number Weight lbs (kg)

1/8" PTH-100-A1AA 0.87 (40)
1/4" PTH-200-A1AA 0.87 (40)

* Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.

Filter/Regulator bonnet: Acetal
Filter/Regulator valve seat: Acetal
Bowls
Transparent: Polycarbonate
Metal: Zinc
Lubricator sight-feed dome: Transparent

nylon
Filter element: Sintered polypropylene
Elastomers: Nitrile

ALE-58

www.norgren.com/info/US-ALE-

58

PTH Filter/Regulator-Lubricator Combination Units

1.68 (43)

1.26 (32)

2.13 (54)

1.50 (38)

1.78 (45)

1.78 (45)

3

.55 (90)

1.50 (38)

0.174††
(4)

Dia.

0.29
(7)

Dia.

0.55

(14)

1.12 (28)

2.67 (68)

3.72 (94) Automatic Drain

0.38 (10)

3.87 (98) Manual Drain

1.65 (42)

3.07 (78) Without Drain

8.31 (211)†

0.55

(14)

†Minimum distance required to remove bowl
†† Mounting holes

Alternative Models

P T H - ˙ ˙ ˙ - ˙ ˙ ˙ A

ort Size Substitute

P

/8" 1

1

/4" 2

1

utlet Pressure
Filter/Regulator Adjustment Range* Relief
Bowl bar psig Type Gauge Substitute

Transparent 5 to 100 0.3 to 7 Relieving With 00

ransparent 5 to 100 0.3 to 7 Relieving Without 01

T

etal / no sight glass 5 to 100 0.3 to 7 Relieving With 40

M

etal / no sight glass 5 to 100 0.3 to 7 Relieving Without 41

M

Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to

*
control pressures outside of the specified ranges.

O

07 Series

Lubricator Reservoir Substitute

ransparent with drain A

T

etal with drain M

M

ilter/Regulator Element Substitute

F

5 µm 1
40 µm 3

ilter/Regulator Drain Substitute

F

Automatic A
Manual M

Service Kits

Item Type Part number

Service kits, relieving, 5 µm element 3820-02
filter/regulator non relieving, 5 µm element 3820-01
Service kit, lubricator 3795-03
Replacement drains Manual 773-03

Replacement wall Integral 2 piece 6700-30
bracket for PTH unit

Filter/regulator service kit contains slip ring, diaphragm, valve seat with o-ring, valve, valve
spring, element, element gasket, and bowl o-ring.
Lubricator service kit contains sight-feed dome seal, cartridge o-ring, and bowl o-ring.

Automatic 3654-02

AIR LINE EQUIPMENT

All Dimensions in Inches (mm)

ALE-59