Nordson EFD Ultimus V User Manual

Ultimus V High Precision Dispenser

High-precision benchtop fluid dispensing control for advanced applications

Easy-to-program full electronic pressure
regulation keeps critical fluid dispensing
processes consistent from start to finish.

Features

• Auto Increment mode adjusts dispensing
parameters after a certain number of shots
or a specic lapsed time

• 400 individual memory storage cells

• Steady, Timed, and Teach modes

• Multi-level operator lockout

• End-of-cycle feedback loop

• External PC interface for data input

• Display cycle counter

• RS-232 communications capability

• D-sub I/O (15-pin) and communication (9-pin)
connections

High-precision benchtop fluid dispensing control for advanced applications, two-part epoxies, and fluids that change viscosity.

• Alarm I/O signals

Specically designed to work
with the Ultimus™ V, the patented
Optimeter™ provides even greater
control when dispensing all uids
by automatically increasing airow
as the syringe barrel empties.

Part # Description

7012590 Ultimus V dispenser, 0–7.0 bar (0–100 psi) pressure regulator

7012589 Ultimus V calibrated dispenser, 0–7.0 bar (0–100 psi) pressure regulator

calibrated to EFD specifications based on NIST standards

7014503 Ultimus V Optimeter 30cc; Specify #7014504 for Optimeter 10cc

Benefits

• Shot size stays consistent, regardless of
changes in fluid viscosity

• Electronic control of dispense time, air
pressure, and vacuum ensures exceptional
accuracy

• Once programmed, air pressure automatically
adjusts as fluid gets thicker or thinner

• Easy “set it and forget it” operation means you
only need to program the Ultimus V once for
each fluid and job

• Simultaneous display of all dispensing
parameters simplifies process control

more info

Specifications

Request a Process Evaluation

Item Specification

Cabinet size 22.5

Weight 3.4 kg (7.7 lb)

Power adapter AC input: 100–240 VAC (+/-10%), ~50/60Hz, 0.5 Amp

Cycle rate Exceeds 600 cycles per minute

Time range 0.0000–9.9999 s

End-of-cycle
feedback circuits

Cycle initiate Foot pedal, finger switch, or 5–24 VDC signal

Air output 0–7.0 bar (0–100 psi)

Approvals CE, TUV, RoHS, WEEE, China RoHS

Warranty 1 year, limited

W x 9.50H x 19.9D cm (8.86W x 3.74H x 7.85D")

DC output: 24 VDC @ 1.66 Amp

5–24 VDC, 100 mA maximum

Contact Nordson EFD to configure a precision
dispense system that meets your specific
needs, with:

• A complimentary process evaluation by
experienced fluid dispensing experts.

• Samples processed for customer evaluation
and approval prior to purchase.

High speed microdot dispensing with Ultimus V and Optimeter.

Automated Dispensing Systems

Nordson EFD automated dispensing systems deliver market­leading repeatability and accuracy in fluid placement and
positioning. Specialized dispensing software simplifies setup
and programming. Optimize dispensing results with features
such as laser height sensing and smart vision CCD cameras.

For Nordson EFD sales and service in over 40 countries,
contact Nordson EFD or go to www.nordsonefd.com.

Global

800-556-3484; [phone]
[e-mail]

Europe
00800 7001 7001
[e-mail]

Asia
China: [phone]; [e-mail]
India: [phone]; [e-mail]
Japan: [phone]; [e-mail]
Korea: [phone]; [e-mail]
SEAsia: [phone]; [e-mail]

©2021 Nordson Corporation v041921