Nordson EFD Ultimus I–II User Manual

Ultimus I–II™ Series Dispensing Workstation

Flex Arm (#7017105) & Stiff Arm (#7017113) Barrel Holder Instructions

Easy 5-Step Setup

Follow these steps to install the barrel holder.

1. Loosen the thumbscrew and slide the T-nut

assembly into the slot on work panel.

2. Insert the flex arm into the channel of the

accessory mount.

3. Orient the arm properly:

• For 5cc, 10cc, or 30cc syringe barrels, orient
the arm so that thumbscrew on syringe barrel
holder is on the right.

• For 3cc, 55cc, or 70cc syringe barrels, twist the
arm and orient it so that thumbscrew on syringe
barrel holder is on the left.

3

5

4. Tighten the T-nut thumbscrew to secure the arm

to the work panel.

5. Loosen the thumbscrew on the syringe barrel

holder. Insert the syringe barrel. Tighten the
thumbscrew to secure.

2

4

1

For Nordson EFD sales and service in over
40 countries, contact Nordson EFD or go to
www.nordsonefd.com.

Global

800-556-3484; [phone]
[e-mail]

Europe
00800 7001 7001
[e-mail]

Asia
China: [phone]; [e-mail]
India: [phone]; [e-mail]
Japan: [phone]; [e-mail]
Korea: [phone]; [e-mail]
SEAsia: [phone]; [e-mail]

©2021 Nordson Corporation 7023718 v042821