Nordmende SOT400IX User Manual [de]

SOT400IX

OPERATING AND INSTALLATION

INSTRUCTIONS OF

TOUCH CONTROL

BUILT-IN OVEN

Dear Customer,

We take offering quality products more than your expactation as goal, offers you the products produced in modern facilities carefully and particularly tested for quality.

Your manual is prepared in order to help you to use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency.

Before use of your appliance, carefully read this guide that includes the basic information for right and safe installation, maintenance and use. Contact to the nearest Authorized Service for mounting of your product.

Contents

1- Presentation and size of product 2- Warnings 3- Preparation for installation and use 4- Using the oven 5- Cleaning and maintenance of your product 6- Service and Transport

PART 1: PRESENTATION AND SIZE OF PRODUCT

LIST OF COMPONENTS :

1- Control panel 2- Handle 3- Oven Door 4- Child Lock 5- Tray 6- Lower Heating Element (behind the plate) 7- Upper Heating Element (behind the plate)

8- Wire Grill 9- Racks 10- Oven Light 11- Turbo Heating Element(behind the plate) 12- Fan (behind the plate) 13- Air Outlet Shutters

PART 2: WARNINGS

BEFORE STARTING TO USE THE APPLIANCE, PLEASE TAKE ALL ESSENTIAL SAFETY MEASURES AND THROUGHLY READ THE USER MANUAL

This appliance has been designed for domestic use as built-in furniture.

After removing the packaging, make sure to check if there is any damage to the appliance. If there is any damage, never attempt to use the appliance and immediately contact your Authorized Service. As packaging materials need to be collected immediately and put out of reach.

The appliance must be installed and put in operation by an authorised technician under the conditions provided by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might occur due to faulty installation.

Before connecting your appliance to the mains at home, make sure to check the conformity of voltage settings, which are specified on the information sticker attached to the appliance and/or packaking, with the usage conditions available.

Do not operate the oven before it is fully installed.

Be sure that all of its buttons are turned off when the appliance is not in use.

Be sure that the supply cable is not wedged during the installation of the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Before replacing the oven illuminating light, turn off the power to the appliance.

Switch off the appliance before cleaning, maintenance work etc.

Some parts of the appliance may preserve their heat for a long time; please wait untill the parts primarily exposed to heat cool off before touching them.

Do not keep flammable items/substances near the appliance while it is in use.

When operating other electrical devices near the appliance, pay attention that their cables do not come into contact with heated parts.

When the appliance is not in use, make sure that the buttons are in off position.

Your appliance needs sufficient air circulation while it is operating. Carefully read the part of this manual, where installation procedures are explained, and make sure the relevant conditions are satisfied.

This operating manual has been prepared jointly for multiple models. Some of the specifications explained in the manual, may not be included, in your appliance. Pay attention to the explanations with illustrations while reading the manual.

During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.

WARNING: Accessible parts may become hot during use. Young children should be kept away.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

FOR THE EFFICIENCY AND SAFETY OF THE APPLIANCE, WE RECOMMEND THAT

YOU ALWAYS USE ORIGINAL SPARE PARTS AND CALL ONLY AUTHORIZED

SERVICE PERSONNEL SHOULD YOU NEED HELP.

Pay attention to the following when using your appliance.

Be careful to connect your appliance to an earthed power outlet or line.

Make sure to adjust the time at first run or in case of a power failure. Heat and moisture will form in your cooking environment. Throughly ventilate your kitchen.

When you first run your oven a certain smell will be emanated arising from the insulation materials and the heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45 minutes. At the same time you need to property ventilate the environment in which the oven is installed.

Do not touch the interior and the heater when using the oven part of the applianca as it wil be hot. After switching off the burner, do not touch it with your hand before it is completely cooled off.

Do not put flammable and combustible materials into the oven.

Be careful when using the oven part of the appliance as the oven surface can be hot. Keep children away from the oven.

While the front door is open. Do not let children climb on the door or sit on it.

The values indicated on the printed documents found on the product are values obtained in laboratory environment according to relevant standarts. These values may vary according to the usage and environment conditions of product.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface,which may result in shaterring of the glass.

WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

Do not use steam cleaners for cleaning the oven. For hobs, the appliance is not intended to be operated by means of an external timer or separate remote-control system.

PART 3: PREPARATION FOR INSTALLATION AND USE

Manufactured with best quality parts and materials, this modern, functional and practical oven will meet your needs in all respects. Make sure to read the manual to obtain successful results and not to experience any problems in the future. The information given below contain rules that are necessary for correct positioning and service operations. They should be read without fail especially by the technician who will position the appliance.

CONTACT THE AUTHORIZED SERVICE FOR INSTALLATION OF YOUR OVEN!

3.1. CHOOSING A PLACE FOR THE OVEN

There are several points to pay attention to when choosing a place for your oven. Make sure to take into account our recommendations below in order to prevent any problems and dangerous situations, which might occur later!

When choosing a place for the oven, attention should be paid that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth etc. which quickly catch fire.

Furnitures surrounding the oven must be made of materials resistant to temperatures above 50 C° more than room temperature.

3.2. INSTALLATION OF BUILT_IN OVEN

Cabinet cut-out sizes

555mm

560mm

575mm

595mm

Min 25mm

ou can use either cabinet 1

or cabinet 2 cut-out sizes

555mm

570mm

580mm

560mm

600mm

20mm

595mm

A DETAIL

Mounting screws

555mm

590mm

570mm

Minimum 40mm(The wooden part can be extended up to cut-out depth)

Wooden

Product sizes

B DETAIL

Countertop

Front

frame

Built-in hob

part

Distance between countertop and control panel

Min.25mm

Control panel

Built-in oven

Min. 50mm

Distance between countertop snd top panel of built-in oven

C DETAIL

Mounting

screw

Spacer

Insert the oven into cabinet by pushing it forward. Open the oven door and insert 2 screws in the holes located on the oven frame. While the product frame touches the wooden surface of cabinet, tighten the screws.

The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant to increases in temperature. In a correct installation, contact with electrical or insulated parts must be prevented. Insulating parts need to be fitted in a way to ensure that they cannot be removed by using any kind of tool. Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended. Otherwise, the performance of the above-mentioned appliances will be negatively affected due to emanating heat. After removing your oven from its packaging, be sure that the oven is not harmed. In case, you suspect of any damage to the appliance, do not use it; immeditely contact Authorized Service.

3.3. WIRING AND SAFETY OF BUILT_IN OVEN

The instructions given below must be followed without fail during wiring :

The earthing cable must be connected via the screw with the earthing mark. Supply cable connection must be as shown in Figure 1. If there is no earthed outlet conforming to regulations in the installation environment, call the Authorized Service immediately.

The earthed outlet must be in close vicinity of the appliance. Never use an extension cord.

The supply cable should not contact the product’s hot surface.

In case of any damage to the supply cable, make sure to call the Authorized Service. The cable must be replaced by the Authorized Service.

Wiring of the appliance must be performed by the Authorized Service. H05VV-F type supply cable must be used.

Faulty wiring may damage the appliance. Such a damage will not be covered under the warranty.

The appliance is designed to connect to 220-240V~ electricty is different than the value given above, call the Authorized Service immediately.

The Manufacturer Firm declares that its bears no responsibility whatsover for any kind of damage and loss arising from not complying with safety norms!

Wiring of the appliance must be performed by the Authorized Service. The appliance is designed to connect to 220-240V~ electricity. If the mains electricity is different than the value given, call the Authorized Service immediately. The appliance is designed for using with plug ofor fixed connection to the mains. It is necessary that you install a double pole switch between the product and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts. (20A rated, delay function type).

BLUE

BROWN YELLOW+GREEN

Figure 1

3.4. GENERAL WARNING AND PRECAUTIONS

Your appliance is produced in conformity with the relevant safety instructions relating to electrical appliances. Maintanance and repair works must be performed only by Authorized Service technicians trained by the manufacturer firm. Installation and repair works, performed without observing the rules may be dangerous.

The outer surfaces is heated while your appliance is operating. The elements heating the inner surface of the oven and the steam out are extremely hot. These sections will continue to preserve their heat for certain while even if the appliance is switched off. Never touch the hot surfaces. Keep children away.

In order to cook in your oven, the oven function and temperature setting butttons need to be adjusted and the oven timer, needs to be programmed. Otherwise, the oven will not operate.

While the oven door is open, do not place anything on it. You may disturb the balance of the appliance or break the door.

Unplug your appliance when it is not in use.

Protect your appliance from atmospheric effects. Do not leave it under the effects of the sun,rain, snow, dust etc.

PART 4: USING THE OVEN

4.1. USING THE OVEN FUNCTION Table 1

The oven light will be turned on.

The oven light, the red warning light and the fan will be turned on. Performs the function of defrosting the frozen foods.

The oven’s thermostat and warning lights, the fan and the turbo heater will be switched on.

The oven’s thermostat and warning lights and the lower and upper heating elements will be switched on.

The oven’s thermostat and warning lights, the fan and the lower and upper heating elements will be switched on.

The oven’s thermostat and warning lights, the lower heating element, the turbo heater, will be switched on.

The oven’s thermostat and warning lights and the grill heater function will be switched on.

The oven’s thermostat and warning lights, the upper heating element and the grill heater function will be switched on.

the fan,

The oven’s thermostat and warning lights, the upper heating element, the grill heater and the fan function will be switched on.

Availability of the functions explained below vary depending on the product model.

Defrost Function :

You can start the defrost operation by putting the frozen food into oven and bringing the button to the indicated mark. This function does not cook/bake the food; it only helps defrost it within a short time. Put the food to be defrosted on the wire rack that you will place on the third rack support from the bottom (Figure 2). To collect the water to accumulate due to the melting ice, insert an oven tray into the lower rack.

Figure 2

Turbo Fan Function :

The turbo fan function evenly disperses the heat in the oven. All foods on all racks will be cooked evenly. Adjust the thermostat button to the desired degree. Turn the function button so it will point to the Tubo function symbol. After completing the preheating of 10 minutes, place the foods into the oven, which need to be put into suitable containers. This function is suitable for cooking multiple dishes. If you are going to cook using two trays at the same time; while adjusting the cooking temperature, select the temperature that is the lowest among the levels suitable for your foods, as shown on the table. Cooking with two trays requires additional cooking time compared to cooking with one tray. Usually, the foods on both trays do not finish at the same time. Therefore, take the tray out of the oven, which you observed is finished and continue the cooking operation for the other tray. After the cooking/baking, turn off the oven function control button and the thermostat button and cancel the timer program if available. Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven completely cools off by keeping the oven door open. As the oven will be hot, stay away from the oven and keep your children away as

well.

Lower-Upper Heating Element Function (Static Coking) :

In this type of cooking which is described as the traditional method, the heat emanating evenly from the lower and upper resistors into the oven ensures even cooking of the lower and upper side of the food that you are cooking. Adjust the thermostat botton of your oven to a temperature recommended on the cooking table for the cooking operation you will perform. A preheating of the oven for about 10 minutes is recommended. Leave a food to cook, which is placed in a suitable container, for the recommended duration. This position is a preferred function in making cakes, sponge cakes, pastry, baked pasta, lasagne,

pizza.

After a cooking/baking, turn off the oven function control button and the thermostat button and cancel the timer program if available. Take the cooked/bake food out of the oven, place it on a safe place and ensure that the oven copmletely cools off by keepig the oven door open. As the oven will be hot, stay away from the oven and keep your children away as

well.

Fan and the Lower - Upper Heating Element Function:

This is the position where the air is coming from the lower and upper heating elements is circulated into the oven by the fan motor and blade. Adjust the thermostat button of your oven to temperature recommended on the cooking table for the cooking operation yo will perform. Turn the oven button so it will point to the symbol of this funtion, adjust the oven timer to the recommended time for cooking and preheat the oven for about 10 minutes. The food placed in a suitable container is put into the oven and the operation is started. This position is position where usually very good results are obtained in baking pastry. All parts of the foods will be cooked evenly in this position . Suitable for cooking with one tray. After the cooking/baking, turn off the oven function control button and the temperature setting button and cancel the timer program if available. Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven completely cools off by keeping the oven door open. As the oven will be hot, stay away from the oven and keep your children away as well.

Grill Function :

This function is used for grills. For grills; put the foods on the grill, and the grill on the highest rack. After placing the oven tray on the 2. Rack, You can start the grill operation. The tray placed on the 2. Rack will ensure that the oil dropping from he foods will be collected. When

grilling, the oven door must be closed and the oven temperature should be adjusted to 200°C.

Turn your oven’s thermostat button so it will point to this temperature value. After a preheating period of 5 minutes, put your food into the oven. After the cooking, turn off the oven function control button and the thermostat button and cancel the timer program. Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven completely cools off by keeping the oven door open. As the

oven will be hot, stay away from the oven and keep your children away as well.

Upper Heating Element and Grill Function :

This function is used for faster grills and for grills. For grills; put the foods on the grill, and the grill on the highest rack. After placing the oven tray on the 2. Rack, you can start teh grill operation. 2, the tray placed on the 2. Rack will ensure that the oil dropping from the foods will be collected. When grilling, the oven door must be closed and the

oven temperatureshould be adjusted to 200°.

Turn your oven’s thermostat button so it will point to this temperature value. After a preheating period of 5 minutes, put your foods into the oven. After the cooking, turn off the oven function control button and the thermostat button and cancel the timer program if available. Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven completely cools off by keeping the oven door open.

As the oven will be hot, stay away from the oven and keep your children away as well.

Grill and Fan Function :

At this function; ensuring complete frying by working together, the fan, the grill and the upper heating element perform the operation. It is also used for faster grills and for grills. For grills; put the foods on the grill, and the grill on the highest rack. After placing the oven tray on the 2. rack, you can start the grill operation. The tray placed on the 2. rack will ensure that the oil dropping from the foods will be collected. When grilling, the oven door must be closed and the oven temperaure should be adjusted to 200°C.

Turn your oven’s thermostat button so it will point to this temperature value. After a preheating period of 5 minutes, put your foods into the oven.

After the cooking, turn off the oven function control button and the thermostat button and cancel the timer program. Take the cooked/baked food out of the oven, place it on a safe place and ensurethat the oven completely cools off by keeping the oven door open. As the

oven will be hot, stay away from the oven and keep your children away as well.

Turbo Fan and Lower Heating Element Function :

Turbo Fan and the Lower Heating Element Function is ideal for baking pizza. While the turbo fan evenly disperses the heat of the oven, the lower heating element ensures the baking of the pizza dough. Adjust your oven’s function button so it will point to the symbol of this function. After a preheating period of 10 minutes, put your foods into the oven. After cooking, turn off the oven function control button and the thermostat button and cancel the timer program. Take the cooked/baked food out of the oven, place it on a safe place and ensure that the oven compltely cools off by keeping the oven door open. As the oven will be hot,

stay away from the oven and keep your children away as well.

Turbo Fan an the Lower Heating Element Function is ideal for baking pizza. While the turbo fan evenly disperses the heat of the oven, the lower heating element ensures the baking of the pizza dough.

Minimize the amount of liquid or fat to reduce cooking times.

Oven door should not be opened often during cooking period.

4.2. HOW TO USE THE TOUCH CONTROL UNIT

BOOST

Mode

Figure 4

The control unit switches off after 5 minutes, if no function is selected and is changed.

The appliances is operated using Touch control sensor fields. The function is controlled by touching the sensor fields.

When you are using the controls make sure that you touched the sensor field correctly. If your finger applied too flat or too small, the sensors will not operate correctly.

The cooling fan switches on automatically in order to keep the appliance's surfaces cool. When the oven is switched off, the fan continues to run to cool the appliance down, than switches itself off automatically.

Oven Function Selection:

Touch the ON/OFF sensor 2 seconds to turn on the control unit. This situation is called as a “WAIT mode” and during this mode, you can select desired cooking functions, adjust temperature, activate the BOOST function and adjust cooking time, end time, minute minder and time of day.

During the WAIT mode, the desired cooking function can be selected by touching P sensor. Every touching of P sensor change the oven functions as below. Some of these cooking functions may not be exist according to your model.

Lamp (with/without turnspit)

(with/without turnspit)

The operated heaters and accessories are shown on the display, according to selected function.

When cooking function selected via P sensor, pre-adjusted temperature value will be shown on the temperature display and this can be adjusted with Temperature Plus and Minus sensors which are on the sides of the display. The temperature can be adjusted within 50275 °C.

㻌

Defrost

㻌

Turbo

㻌

Upper and Lower

㻌

Double Grill (with/without turnspit)

㻌

Upper and Lower with Fan

㻌

Pizza

㻌

Double Grill with Fan

㻌

Grill

+ 30 hidden pages