6. Reminder Function
This function will help to remind you to start cooking at a time between 0:01 to 9:59. This
reminder can only be set when the oven is in standby mode. To set the reminder:
1> Press reminder setting button " ";
2> Rotate Knob 2 to set the hour time of reminder. (This should be between 0 and 9).
3> Press reminder setting button " " again;
4> Rotate Knob 2 to set the minute time of reminder. (This should be between 0 and 59).
5> Press "
" to confirm the settings. The time will count down.
Note: The oven buzzer will sound 10 times when the countdown timer clock reaches zero.
" button; After the reminder has been
You can cancel the reminder during cooking by pressing the"
set, you can cancel it by pressing the pause button twice.
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press " " to start cooking.
If the cooking is paused, press " " to resume cooking.
2> During cooking process, press "
Press "
" twice to cancel the cooking.
" once to pause the cooking.
8. Energy-Saving Function
1> When in standby or reminder mode, press "
" for three seconds, the LED display will turn
off and go into energy-saving mode.
2> Under the energy-saving mode, press any key or rotate any knob to take the appliance out of
energy-saving mode.
"
. The finish
time can be checked by pressing " ". After 3 seconds, the
screen will display the clock again.
4> When the delayed start begins, cooking will start automatically following a buzzing sound.
The reservation symbol " " will be displayed.
9. Delayed Start Function
1>
To use the Delayed Start Function, the clock must be set in advance. To set the start time,
press the " " button. Rotate Knob 2 to set the hour. The time should be between 0 and 23. Press
the " " button again. Rotate Knob 2 to set the minute. The time should be between 0 and 59.
Then, turn Knob 1 to choose the function.
2> Press "
" button to set the cooking time and temperature. Then, turn Knob 1 to adjust the time
and Knob 2 to adjust the temperature.
3>
Press " " button to save the setting. The screen will display the clock and the "