Nordmende SO203BL, SO203IX, SOT213IX, SOT213MR Operating And Installation Instructions

OPERATING AND INSTALLATION

INSTRUCTIONS OF

BUILT-IN OVEN

SO203BL

SO203IX

Dear Customer,

We take offering quality products more than your expactation
as goal, offers you the products produced in modern facilities
carefully and particularly tested for quality.

Your manual is prepared in order to help you to use your
appliance that is manufactured by the most recent technology,
with confidence and maximum efficiency.

Before use of your appliance, carefully read this guide that
includes the basic information for right and safe installation,
maintenance and use. Contact to the nearest Authorized
Service for mounting of your product.

1

Contents

1- Presentation and size of product
2- Warnings
3- Preparation for installation and use
4- Using the oven
5- Cleaning and maintenance of your product
6- Service and Transport

2

PART 1: PRESENTATION AND SIZE OF PRODUCT

LIST OF COMPONENTS :

1- Control panel
2- Handle
3- Oven Door
4- Child Lock
5- Tray
6- Lower Heating Element (behind the plate)
7- Upper Heating Element (behind the plate)

8- Wire Grill
9- Racks
10- Oven Light
11- Turbo Heating Element(behind the plate)
12- Fan (behind the plate)
13- Air Outlet Shutters

3

PART 2 SAFETY WARNINGS

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING YOUR

APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY.

THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR APPLIANCE

MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY

ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES, WHILE YOU ARE READING THE

OPERATING MANUAL.

General Safety Warnings

- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.

- WARNING: The appliance and its accessible
parts become hot during use. Care should be
taken to avoid touching heating elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.

- WARNING: Danger of fire: do not store items
on the cooking surfaces.

- WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock.

- The appliance is not intended to be operated
by means of an external timer or separate
remote-control system.

4

- During use, the appliance becomes hot. Care
should be taken to avoid touching heating
elements inside the oven.

- During use, handles held for short periods in
normal use can get hot.

- Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass and
other surface since they can scratch the surface,
which may result in shattering of the glass or
damage to the surface.

- Do not use steam cleaners for cleaning the
appliance.

- WARNING: Ensure that the appliance is
switched off before replacing the lamp to avoid
the possibility of electric shock.

- CAUTION: Accessible parts may be hot when
the cooking or grilling is in use. Young children
should be kept away.

- Your appliance is produced in accordance with all applicable local and international
standards and regulations.

- Maintenance and repair work must be made only by authorized service technicians.
Installation and repair work that is carried out by unauthorized technicians may endanger you.
It is dangerous to alter or modify the specifications of the appliance in any way.

- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure or electricity voltage and frequency) and the requirements of the appliance are
compatible. The requirements for this appliance are stated on the label.

- CAUTION: This appliance is designed only for cooking food and is intended for indoor
domestic household use only and should not be used for any other purpose or in any other
application, such as for non-domestic use or in a commercial environment or room heating.

- Do not try to lift or move the appliance by pulling the door handle.

- All possible security measures have been taken to ensure your safety. Since the glass may
break, you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on
the glass with accessories.

- Ensure that the supply cord is not wedged during the installation. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to prevent a hazard.

- While the oven door is open, do not let children climb on the door or sit on it.

Installation Warnings

- Do not operate the appliance before it is fully installed.

- The appliance must be installed by an authorized technician and put into use. The producer
is not responsible for any damage that might be caused by defective placement and
installation by unauthorized people.

- When you unpack the appliance, make sure that it is not damaged during transportation. In
case of any defect; do not use the appliance and contact a qualified service agent
immediately. As the materials used for packaging (nylon, staplers, styrofoam...etc) may cause
harmful effects to children, they should be collected and removed immediately.

- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun,
rain, snow etc.

- The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.

During usage

- When you first run your oven a certain smell will emanate from the insulation materials and
the heater elements. For this reason, before using your oven, run it empty at maximum
temperature for 45 minutes. At the same time you need to properly ventilate the environment
in which the product is installed.

- During usage, the outer and inner surfaces of the oven get hot. While opening the oven
door, step back to avoid the hot steam coming out of the oven. There may be a risk of burns.

- Do not put flammable or combustible materials, in or near the appliance when it is operating.

- Always use oven gloves to remove and replace food in the oven.

- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on
condition of extreme heating. Never pour water on to flames that are caused by oil. Cover the
saucepan or frypan with its cover in order to choke the flame that has occured in this case
and turn the cooker off.

- If you will not use the appliance for a long time, plug it off. Keep the main control switch off.
Also when you do not use the appliance, keep the gas valve off.

- Make sure the appliance control knobs are always in the "0" (stop) position when it is not
used.

- The trays incline when pulled out. Be careful not to let hot liquid spill over.

- When the door or drawer of the oven is open, do not leave anything on it. You may
unbalance your appliance or break the cover.

- Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper,
cloth...etc) into the drawer. This includes cookware with plastic accessories (e.g. handles).

- Do not hang towels, dishcloths or clothes from the appliance or its handles.

During cleaning and maintenance

- Always turn the appliance off before operations such as cleaning or maintenance. You can
do it after plugging the appliance off or turning the main switches off.

- Do not remove the control knobs to clean the control panel.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE

RECOMMEND YOU ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR

AUTHORIZED SERVICE AGENTS IN CASE OF NEED.

5

6

PART 3: PREPARATION FOR INSTALLATION AND USE

Figure 1

When choosing a place for the oven, attention should be paid that there are no flammable
or combustible materials in the close vicinity, such as curtains, oil, cloth etc. which quickly
catch fire.

Furnitures surrounding the oven must be made of materials resistant to heat more than 50
C° of the room temperature.

Required changes to wall cabinets and exhaust fans above the built-in combined product
as well as minimum heights from the oven board are shown in Figure 1. Accordingly, the
exhaust fan should be at a minimum height of 65 cm from the hob board. If there is no
exhaust fan the height should not be less than 70 cm.

Manufactured with best quality parts and materials, this modern, functional and practical
oven will meet your needs in all respects. Make sure to read the manual to obtain successful
results and not to experience any problems in the future. The information given below contain
rules that are necessary for correct positioning and service operations. They should be read
without fail especially by the technician who will position the appliance.

CONTACT THE AUTHORIZED SERVICE FOR INSTALLATION OF YOUR OVEN!

3.1. CHOOSING A PLACE FOR THE OVEN

There are several points to pay attention to when choosing a place for your oven.
Make sure to take into account our recommendations below in order to prevent any
problems and dangerous situations, which might occur later!

7

C DETAIL

Insert the oven into cabinet by pushing it forward. Open the oven door and insert 2 screws in
the holes located on the oven frame. While the product frame touches the wooden surface of
cabinet, tighten the screws.

Cabinet cut-out sizes

You can use either cabinet 1
or cabinet 2 cut-out sizes

2

A

B

595mm

Min 25mm

580mm

560mm

600mm

1

555mm

575mm

560mm

A DETAIL

20mm

Minimum 40mm(The wooden
part can be extended up
to cut-out depth)

Product sizes

B DETAIL

Countertop

Built-in oven

Min.25mm

Control
panel

Distance between
countertop and
control panel

Min. 50mm

Built-in hob

Distance between
countertop snd
top panel of built-in
oven

3.2. INSTALLATION OF BUILT_IN OVEN

Front

frame

Spacer

Mounting

screw

Wooden

part

C

555mm

595mm

570mm

555mm

Mounting screws

570mm

590mm

8

The dimensions and material of the cabinet in which the oven will be installed must be
correct and resistant to increases in temperature. In a correct installation, contact with
electrical or insulated parts must be prevented. Insulating parts need to be fitted in a way to
ensure that they cannot be removed by using any kind of tool. Installing the appliance in the
close vicinity of a refrigerator or a deep-freezer is not recommended. Otherwise, the
performance of the above-mentioned appliances will be negatively affected due to
emanating heat. After removing your oven from its packaging, be sure that the oven is not
harmed. In case, you suspect of any damage to the appliance, do not use it; immeditely
contact Authorized Service.

3.3. WIRING AND SAFETY OF BUILT_IN OVEN

The instructions given below must be followed without fail during wiring :

The earthing cable must be connected via the screw with the earthing mark. Supply cable
connection must be as shown in Figure 6. If there is no earthed outlet conforming to
regulations in the installation environment, call the Authorized Service immediately.

The earthed outlet must be in close vicinity of the appliance. Never use an extension cord.

The supply cable should not contact the product’s hot surface.

In case of any damage to the supply cable, make sure to call the Authorized Service. The
cable must be replaced by the Authorized Service.

Wiring of the appliance must be performed by the Authorized Service. H05VV-F type
supply cable must be used.

Faulty wiring may damage the appliance. Such a damage will not be covered under the
warranty.

The appliance is designed to connect to 220-240V~ electricty is different than the value
given above, call the Authorized Service immediately.

The Manucaturer Firm declares that its bears no responsibility whatsover for any
kind of damage and loss arising from not complying with safety norms!

Figure 6

BLUE

BROWN

YELLOW+GREEN

9

PART 4: USING THE OVEN

4.1 CONTROL PANELS

Oven Function
Control Knob

Minute Minder

Oven Thermostat Knob

Oven Thermostat LightOven Operation Light

Built_in Oven

Figure 11

Figure 12

Oven Function Control Knob:

To select the desired cooking function, turn the knob
to the related symbol(Figure 11). the details of the
oven functions have been explained in Table 1 and
next part.

Oven Thermostat Knob:

After cooking function set, desired temperature can
be adjusted by oven thermostat knob (figure 12) and
oven start to operate (timer must be adjusted, if
available).
Thermostat signal light will be on or off according to
thermostat operation.

50°

200°

Max

250°

100°

150°

50°

200°

Max

250°

100°

150°

0

10

4. USE OF YOUR PRODUCT

Defrost Function

* The functions of your oven may be different due to the model of your product.

The oven lights will be turned on, the fan starts operating.

To use the defrost function, take your frozen food and place it in the oven on a shelf placed in the
third slot from the bottom. It is recommended that you can place an oven tray under the
defrosting food, to catch the water accumulated due to melting ice. This function will not cook or
bake your food, it will only help to defrost it.

's warning

4.2. USING THE OVEN FUNCTION CONTROL BUTTON

Turbo Function

The oven lights will be turned on, the ring heating element and fan will
start operating.

The turbo function evenly disperse the heat in the oven. All foods on all racks will be cooked
evenly. It is recommended to pre-heat the oven about 10 minutes.

's thermostat and warning

Grilling Function

Faster Grilling Function

The oven lights will be turned on, the grill heating element will start
operating.

The function is used for grilling and toasting foods, use the upper shelves of oven. Lightly brush
the wire grid with oil to stop foods sticking and place foods in the center of the grid. Always place
a tray beneath to catch any drips of oil or fat. It is recommended to pre-heat the oven about 10
minutes.

Warning: When grilling, the oven door must be closed and the oven temperature should be

0

adjusted to 190 C.

's thermostat and warning

The oven lights will be turned on, the grill and upper heating
elements will start operating.

The function is used for faster grilling and for covering a larger surface area, such as grilling meats,
use the upper shelves of oven. Lightly brush the wire grid with oil to stop foods sticking and place
foods in the center of the grid. Always place a tray beneath to catch any drips of oil or fat. It is
recommended to pre-heat the oven about 10 minutes.

Warning: When grilling, the oven door must be closed and the oven temperature should be

0

adjusted to 190 C.

's thermostat and warning

11

During use of electrical cookers , it is required to use saucepans having flat bases.

Choose a cookware of proper size.

Using a lid will reduce cooking times.

Minimize the amount of liquid or fat to reduce cooking times.

When liquid starts boling ,reduce the temperature setting.

Oven door should not be opened often during cooking period.

ENERGY SAVING

12

4. USE OF YOUR PRODUCT

4.3. USING TIMER

Use of mechanical minute minder

Set the desired cooking time by turning timer button
clockwise. At the end of this time period, it will make a beep
sound, but the oven continues working. In order to turn the
oven off, you must switch off the oven kontrol.

0